Miranda PicoLink Series Bedienungsanleitung

picoLink series

FOE-171p

Fiber Optic to SD Converter

Guide to Installation and Operation

M394-9920-102

17 Mar 2009

Miranda

Technologies Inc.

3499 Douglas-B.-Floreani

St-Laurent, Québec, Canada H4S 1Y6

Tel. 514-333-1772

Fax. 514-333-9828

www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FOE-171p

Radio Frequency Interference and Immunity

This unit generates, uses and can radiate radio frequency

energy. If the unit is not properly installed and used in

accordance with this guide, it may cause interference with radio

communications. Operation with non-certified peripheral devices

is likely to result in interference with radio and television

reception. This equipment has been tested and complies with the

limits in accordance with the specifications in:

FCC Part 15, Subpart B

CE EN50081-1:1992

CE EN50082-1:1992

Contact Miranda

For technical assistance, please contact the Miranda

Technical Support centre nearest you:

Americas

Telephone:

+1-800-224-7882

e-mail:

[email protected]

Asia

Telephone:

+852-2539-6987

e-mail:

[email protected]

Europe, Middle East, Africa, UK

Telephone:

+44 (0) 1491 820222

e-mail:

eurotech@miranda.com

China

Telephone:

+86-10-5873-1814

e-mail:

[email protected]

France (only)

Telephone:

+33 (0) 1 55 86 87 88

e-mail:

[email protected]

Visit our web site at www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FOE-171p

Table of Contents

1FOE-171p Fiber Optic to HD/SD Converter....................... 1

1.1 Introduction........................................................................ 1

1.2 Features ............................................................................ 1

2Overview .............................................................................. 2

3Installation ........................................................................... 3

3.1 Power Supply .................................................................... 3

3.2 Fiber Input ......................................................................... 4

3.3 4:2:2 Digital Video Output ................................................. 4

4Operation ............................................................................. 5

4.1 Status LED ........................................................................ 5

5Specifications...................................................................... 6

GUIDE TO INSTALLATION AND OPERATION

FOE-171p

GUIDE TO INSTALLATION AND OPERATION

FOE-171p | 1

1 FOE-171p Fiber Optic to HD/SD Converter

1.1 Introduction

The FOE-171p is a compact stand-alone optical to electrical

solution for receiving digital video signals over a single mode

fiber optic link. The FOE-171p has been designed to work in

conjunction with the FEO-171p Electrical to Optical Transmitter.

The FOE-171p can be used stand-alone or can be mounted in a

special rack tray that allows the picoLink fiber converters to

become an optical to/from electrical patch field.

Optical

Rx 4:2:2 OUT

FIBER

Figure 1: FOE-871p functional block diagram

1.2 Features

•Cost effective, compact and lightweight

•Supports SDI 270 Mbps SMPTE 259M-C

•Conforms to SMPTE 297M

•Reclocked input

•Single-mode with SC/PC connector

•Valid input signal indication

•Stand alone mounting

•Optional rack mount tray turns picoLink into optical patch

field

GUIDE TO INSTALLATION AND OPERATION

2| FOE-171p

2 Overview

Figure 2 illustrates the FOE-171p's major parts and their

locations. The optical fiber input is connected using a single-

mode SC connector, and the 4:2:2 digital video output appears

on a BNC connector. Error status is provided by the status LED.

Finally, the power source is connected to the mini-XLR type

connector.

Figure 2: Overall view of the FOE-171p

Power connector

Input SC

Status LED

Out

ut BNC

GUIDE TO INSTALLATION AND OPERATION

FOE-171p | 3

3 Installation

3.1 Power Supply

The LKS-WSU power supply provides power to the FOE-171p

for 110 V and 220 V operation. The power supply is a regulated

+5 [email protected] A power source. The FOE-171p employs a mini

XLR-3 connector for its power needs. Figure 3 shows a detailed

pinout of the male connector.

Figure 3: Power connector pinout

GUIDE TO INSTALLATION AND OPERATION

4| FOE-171p

3.2 Fiber Input

Connect an optical signal to the SC connector labeled FIBER IN.

Class 1 laser product

Hazards for the Operator

Active optic fibers emit radiation invisible to the naked eye.

Never look directly at the end of an active optic fiber.

Caution

Although not considered overly dangerous for the

eye, avoid accidental exposure to the optical beam

emitted from the fiber optic cable connected to the

FOE-871p input.

3.3 4:2:2 Digital Video Output

A standard-definition digital video signal appears on the BNC

labeled 4:2:2 OUT.

•The standard-definition serial digital output signal

conforms to the SMPTE 259M-ABCD standard or the

DVB-ASI (270 Mbps).

GUIDE TO INSTALLATION AND OPERATION

FOE-171p | 5

4 Operation

There are no operating controls on the FOE-171p.

4.1 Status LED

The bi-colored status LED, located next to the BNC output

connector, is provided to identify any input errors. The following

situations are flagged:

Off: No DC power

Green: Laser light detected with valid SDI signal

Red (steady): Laser light detected but no valid SDI signal

Red (blinking): No laser light detected

GUIDE TO INSTALLATION AND OPERATION

6| FOE-171p

5 Specifications

Optical Input

Signal Compatibility: 270 Mbps SMPTE 259M-C

Reclocked SMPTE 297M

Sensitivity: -25 dB

Fiber Type: Single Mode

Connector: Optical SC/PC

Electrical Output

Signal: SMPTE 259M-C (270 Mbps)I

Return loss: >15 dB up to 270 MHz

Jitter: <0.2 UI p-p

Connector: 75 ΩBNC

General specifications

Processing delay: <5 ns

Power: 1.25 W

Temperature operating range: 0 – 30° C

Andere Handbücher für picoLink Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miranda Medienkonverter Handbücher

Miranda

Miranda ASD-771p Bedienungsanleitung

Miranda

Miranda DVC-800 Bedienungsanleitung

Miranda

Miranda Kaleido-Solo Bedienungsanleitung

Miranda

Miranda FIO-1901-RT Bedienungsanleitung

Miranda

Miranda picoLink FIO-991p Bedienungsanleitung

Miranda

Miranda SDM-875p Bedienungsanleitung

Miranda

Miranda DV-Bridge+ Bedienungsanleitung

Miranda

Miranda XVP-3901 DENSITE series Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda EC9535 Bedienungsanleitung

Miranda

Miranda ASD-231i Betriebsanleitung

Miranda

Miranda DENSITE IRD-3811 Bedienungsanleitung

Miranda

Miranda FIO-1901-TT Bedienungsanleitung

Miranda

Miranda Densite IRD-3111 Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda DENSITE IRD-3101 Bedienungsanleitung

Miranda

Miranda Kaleido-X (7RU) Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda Densite ENC-1103 Bedienungsanleitung

Miranda

Miranda Quartet Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda EdgeVision Bedienungsanleitung

Miranda

Miranda ASD-211i/2D Bedienungsanleitung

Miranda

Miranda FIO-1901-RR Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung