Miranda PicoLink Series Bedienungsanleitung

SDM-171p

Video DAC

Guide to Installation

and Operation

M144-9900-202

Miranda Technologies Inc.

Specifications may be subject to change.

Printed in Canada

March 2007

SDM-171p

picoLink Series

Miranda

Technologies inc.

3499 Douglas-B.-Floreani

St-Laurent, Québec, Canada H4S 1Y6

Tel. 514-333-1772

Fax. 514-333-9828

www.miranda.com

Guide to Installation and Operation

SDM-171p

Radio Frequency Interference and Immunity

This unit generates, uses, and can radiate radio

frequency energy. If the unit is not properly installed and

used in accordance with this guide, it may cause

interference with radio communications. Operation with

non-certified peripheral devices is likely to result in

interference with radio and television reception. This

equipment has been tested and complies with the limits

in accordance with the specifications in:

FCC Part 15, Subpart B

CE EN50081-1:1992

CE EN50082-1:1992.

CONTACT MIRANDA

For technical assistance, please contact the Miranda

Technical Support centre nearest you:

Americas

Telephone:

+1-800-224-7882

e-mail:

[email protected]

Asia

Telephone:

+81-3-5730-2987

e-mail:

[email protected]

Europe, Middle East, Africa, UK

Telephone:

+44 (0) 1491 820222

e-mail:

[email protected]

France (only)

Telephone:

+33 (0) 1 55 86 87 88

e-mail:

[email protected]

Visit our web site at

www.miranda.com

Guide to Installation and Operation

SDM-171p

CONTENTS

page

1.0 SDM-171p.............................................. 1

1.1 Introduction....................................................1

1.2 Features........................................................1

2.0 Physical Layout.....................................2

3.0 Installation.............................................3

3.1 Power Supply................................................3

3.2 4:2:2 Input ...................................................4

3.3 CAV Outputs .................................................4

4.0 Operation...............................................5

4.1 Switch Settings..............................................5

4.2 Status LED....................................................6

5.0 Specifications........................................7

Guide to Installation and Operation

SDM-171p

Guide to Installation and Operation

SDM-171p | 1

1.0 SDM-171p

1.1 Introduction

The SDM-171p is the industry’s smallest 4:2:2 serial

digital video to component analog video DAC. This

product automatically detects 525-line and 625-line 4:2:2

signals conforming to the SMPTE 259M-C standard and

provides BETA/EBU or GBR output signals. An internal

test pattern generator provides a color bars test signal

for both BETA/EBU and GBR outputs. In addition, this

feature-packed unit delivers ease-of-use, a simplified

design, easy installation and operation.

Figure 1: SDM-171p functional block diagram

1.2 Features

•Automatic 525-line and 625-line format input

detection

•Output standard selection: BETA/EBU or GBR with or

without setup

•Color bars generator

•Bi-color LED showing error status on input 4:2:2

signal

•Very small packaging with aluminum extruded body

Serial to

parallel DAC4:2:2 IN B/B-Y

G/Y

R/R-Y

COMPONENT OUT

Guide to Installation and Operation

2| SDM-171p

2.0 Physical Layout

Figure 2 illustrates the SDM-171p’s major parts and their

locations. The video source is connected to the 4:2:2

input BNC and the component analog output signals are

provided by the CAV outputs. Error status is provided by

the status LED and mode settings are configured by two

3-position slide switches. Finally, the power source is

connected to the power connector.

Figure 2: Physical layout of the SDM-171p

4:2:2 input

Power connector

CAV outputs

Status LED

3-position slide switches

Guide to Installation and Operation

SDM-171p | 3

3.0 Installation

3.1 Power Supply

The power supplies LKS-WSA and LKS-WSE, for 110 V

and 220 V operation respectively, are used to power the

SDM-171p. Each power supply provides a regulated +5

VDC@750 mA power source. The SDM-171p employs a

mini XLR-3 connector for its power needs. Figure 3

provides a detailed pinout of the male connector.

(male connector-facing)

Pin 1: Shield

Pin 2: GND

Pin 3: +5 VDC

Figure 3: Power connector pinout

Guide to Installation and Operation

4| SDM-171p

3.2 4:2:2 Input

Connect a 4:2:2 serial digital signal to the BNC labeled

4:2:2 IN. The 4:2:2 input signal must conform to the

SMPTE 259M-C standard.

3.3 CAV Outputs

The CAV outputs consist of green, blue, and red color

coded male BNC connectors. Male connectors are

provided so as to connect the SDM-171p directly to

monitoring equipment. Available CAV output standards

are:

•BETA/EBU

BETA/EBU operation provides Y/B-Y/R-Y

signals on the green, blue, and red BNCs

respectively (BETA = 60Hz; EBU = 50Hz.).

•GBR

The GBR format can be with or without setup.

Refer to Section 4.0 Operation in order to select the

desired output CAV standard.

Guide to Installation and Operation

SDM-171p | 5

4.0 Operation

4.1 Switch Settings

Figure 4 shows the slide switch locations and functions.

Figure 4: SDM-171p switch settings

Output CAV standard switch (SW1)

BETA: For BETA/EBU CAV outputs, set SW1 to

this position.

•BETA: 60 Hz with setup

•EBU: 50 HZ, no setup

The Y/B-Y/R-Y outputs are provided by the

green, blue, and red connectors

respectively.

GBR 7.5: With 525-line inputs, set SW1 to this

position for GBR outputs with 7.5 IRE setup.

There is no setup for 625-line GBR outputs.

GBR: For GBR outputs with 0 IRE setup, set SW1

to this position.

Normal and test pattern switch (SW2)

Normal: For normal operation, set SW2 to this

position.

BETA

GBR 7.5

GBR

Normal

Test

SDM-171p

Miranda Technologies inc.

Made in Canada

Output CAV standard (SW1)

Normal and test (SW2)

Guide to Installation and Operation

6| SDM-171p

Test: Set SW2 to Test in order to enable the test

pattern generator. Make sure a valid 4:2:2

input signal is installed. 525-line outputs

produce a 75% color bars signal whereas

625-line outputs produce a 75% color bars

with 100% white bar signal.

4.2 Status LED

The bi-colored status LED, located next to the CAV

output cable, is provided to identify any input errors and

the selection of the test pattern. The following lists all

possible situations.

Green: Indicates the SDM-171p is powered and has

detected a valid 4:2:2 serial digital signal.

Red: Indicates an error with the input signal has

been detected or simply, there is no input

signal installed.

Yellow: The test pattern is selected.

If an input signal error is detected during a test

pattern selection, the status LED will remain red.

Andere Handbücher für picoLink Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miranda Medienkonverter Handbücher

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda DVC-800 Bedienungsanleitung

Miranda

Miranda DV-Bridge+ Bedienungsanleitung

Miranda

Miranda XVP-801i Betriebsanleitung

Miranda

Miranda ADC-191p Bedienungsanleitung

Miranda

Miranda XVP-3901 DENSITE series Bedienungsanleitung

Miranda

Miranda ASI-Bridge CAM Bedienungsanleitung

Miranda

Miranda ASD-211i/2D Bedienungsanleitung

Miranda

Miranda SDM-872p Bedienungsanleitung

Miranda

Miranda FIO-1901-TT Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda ASD-231i Betriebsanleitung

Miranda

Miranda DENSITE XVP-1801 Bedienungsanleitung

Miranda

Miranda EdgeVision Bedienungsanleitung

Miranda

Miranda ASD-771p Bedienungsanleitung

Miranda

Miranda FIO-1901-RT Bedienungsanleitung

Miranda

Miranda Kaleido-Solo Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda KMV-3901 Bedienungsanleitung

Miranda

Miranda DENSITE IRD-3802 Bedienungsanleitung

Miranda

Miranda ASD-111i Bedienungsanleitung

Miranda

Miranda DENSITE series Bedienungsanleitung

Miranda

Miranda picoLink FIO-991p Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung