Miranda PicoLink Series Bedienungsanleitung

picoLink series

FOE-871p

Fiber Optic to HD/SD

Converter

Guide to Installation and Operation

M734-9900-102

17 Mar 2009

Miranda

Technologies Inc.

3499 Douglas-B.-Floreani

St-Laurent, Québec, Canada H4S 1Y6

Tel. 514-333-1772

Fax. 514-333-9828

www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FOE-871p

Radio Frequency Interference and Immunity

This unit generates, uses and can radiate radio frequency

energy. If the unit is not properly installed and used in

accordance with this guide, it may cause interference with radio

communications. Operation with non-certified peripheral devices

is likely to result in interference with radio and television

reception. This equipment has been tested and complies with the

limits in accordance with the specifications in:

FCC Part 15, Subpart B

CE EN50081-1:1992

CE EN50082-1:1992

Contact Miranda

For technical assistance, please contact the Miranda

Technical Support centre nearest you:

Americas

Telephone:

+1-800-224-7882

e-mail:

[email protected]

Asia

Telephone:

+852-2539-6987

e-mail:

[email protected]

Europe, Middle East, Africa, UK

Telephone:

+44 (0) 1491 820222

e-mail:

[email protected]

China

Telephone:

+86-10-5873-1814

e-mail:

[email protected]

France (only)

Telephone:

+33 (0) 1 55 86 87 88

e-mail:

[email protected]

Visit our web site at www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FOE-871p

Table of Contents

1FOE-871p Fiber Optic to HD/SD Converter....................... 1

1.1 Introduction........................................................................ 1

1.2 Features ............................................................................ 1

2Overview .............................................................................. 2

3Installation ........................................................................... 3

3.1 Power Supply .................................................................... 3

3.2 Fiber Input ......................................................................... 4

3.3 HD/SD Digital Video Output .............................................. 4

4Operation ............................................................................. 5

4.1 Status LED ........................................................................ 5

5Specifications...................................................................... 6

GUIDE TO INSTALLATION AND OPERATION

FOE-871p

GUIDE TO INSTALLATION AND OPERATION

FOE-871p | 1

1 FOE-871p Fiber Optic to HD/SD Converter

1.1 Introduction

The FOE-871p is a compact stand-alone solution receiving

Standard Definition digital video (SMPTE 259M SDI 270 Mbps)

as well as High Definition signals (SMPTE 292M up to 1.5 Gbps)

through an SMPTE 297M fiber optic link. When combined with

the FEO-871p, the solution reaches distances up to 15 km

(depending on the optical link) on single mode fiber, allowing

transparent digital transmission for short haul applications. The

FOE-871p can be used stand-alone or can be mounted in a

special rack tray that allows the picoLink fiber converters to

become an optical-to-electrical patch field. The fiber picoLink

converters' flexible packaging makes them ideal for both

temporary and permanent, intra and inter-facility fiber optic links.

Figure 1: FOE-871p functional block diagram

1.2 Features

•Supports any serial data rate from 5 Mbps (ATSC) to 1.5

Gbps (HD SDI)

•Reclocked serial digital video from 143 Mbps to 1.5 Gbps

•Supports SMPTE 259M, SMPTE 292M, SMPTE 305,

SMPTE 310M, DVB-ASI

•Supports single mode fiber optic @ 1310 nm and 1550 nm

•Status LED indication

•Cost effective solution, compact and lightweight

•Stand-alone mounting

•Optional rack mount tray turns picoLink into optical patch

field

GUIDE TO INSTALLATION AND OPERATION

2| FOE-871p

2 Overview

Figure 2 illustrates the FOE-871p's major parts and their

locations. The optical fiber input is connected using a single-

mode SC connector, and the HD/SD digital video output appears

on a BNC connector. Error status is provided by the status LED.

Finally, the power source is connected to the lockable power

connector.

Figure 2: Overall view of the FOE-871p

Out

ut BNC

Power connector

Input SCStatus LED

GUIDE TO INSTALLATION AND OPERATION

FOE-871p | 3

3 Installation

3.1 Power Supply

The LKS-WSU power supply provides power to the FOE-871p

for 110 V and 220 V operation. The power supply is a regulated

+5 [email protected] A power source. The FOE-871p employs a mini

XLR-3 connector for its power needs. Figure 3 shows a detailed

pinout of the male connector.

Figure 3: Power connector pinout

GUIDE TO INSTALLATION AND OPERATION

4| FOE-871p

3.2 Fiber Input

Connect an optical signal to the SC connector labeled FIBER IN.

Class 1 laser product

Hazards for the Operator

Active optic fibers emit radiation invisible to the naked eye.

Never look directly at the end of an active optic fiber.

Caution

Although not considered overly dangerous for the

eye, avoid accidental exposure to the optical beam

emitted from the fiber optic cable connected to the

FOE-871p input.

3.3 HD/SD Digital Video Output

A reclocked high-definition or standard-definition digital video

signal appears on the BNC labeled HD/SD SDI OUT.

•The high-definition serial digital output signal conforms to

the SMPTE 292M standard.

•The standard-definition serial digital output signal

conforms to the SMPTE 259M-ABCD standard or the

DVB-ASI (270 Mbps).

GUIDE TO INSTALLATION AND OPERATION

FOE-871p | 5

4 Operation

There are no operating controls on the FOE-871p.

4.1 Status LED

The bi-colored status LED, located next to the BNC output

connector, is provided to identify any input errors. The following

situations are flagged:

Off: No DC power

Green: Laser light detected with valid SDI / HD-SDI

signal

Red (steady): Laser light detected but no valid SDI / HD-SDI

signal

Red (blinking): No laser light detected

GUIDE TO INSTALLATION AND OPERATION

6| FOE-871p

5 Specifications

Optical Input

Signal: Optical Laser

Wavelength: 1310 nm and 1550 nm

Sensitivity: -16 dB

Fiber type: Single Mode

Connector: Optical SC/PC

Electrical Output

Signal: SMPTE 259M-A-C (143, 270 Mbps)

SMPTE 292M (1.485 Gbps and

1.485/1.001 Gbps)

SMPTE 305M (SDTI)

SMPTE 310M (5Mbps to 40 Mbps)

DVB-ASI

Return loss: >15 dB up to 1.485 Gbps

Jitter: <0.2UI

Connector: 75 ΩBNC (1)

General specifications

Processing delay: 3 ns @ 1.485 Gbps

Power voltage: 5VDC

Consumption: 2 W

Temperature

operating range: 0 – 30° C

Andere Handbücher für picoLink Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miranda Medienkonverter Handbücher

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda ASD-231i Betriebsanleitung

Miranda

Miranda FIO-1901-TT Bedienungsanleitung

Miranda

Miranda XVP-3901 DENSITE series Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Miranda

Miranda DENSITE IRD-3802 Bedienungsanleitung

Miranda

Miranda FIO-1901-RT Bedienungsanleitung

Miranda

Miranda dec-291p Bedienungsanleitung

Miranda

Miranda ASI-Bridge CAM Bedienungsanleitung

Miranda

Miranda Quartet Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda DV-Bridge+ Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Miranda

Miranda Densite IRD-3111 Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda ADC-191p Bedienungsanleitung

Miranda

Miranda EdgeVision Bedienungsanleitung

Miranda

Miranda SDM-875p Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda DENSITE series Bedienungsanleitung

Miranda

Miranda ASD-211i/2D Bedienungsanleitung

Miranda

Miranda Kaleido-Solo Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung