Mitsubishi Electric LAN UNIT Bedienungsanleitung
INDUSTRIAL SEWING MACHINE
LAN UNIT
MODEL
PLK-J-LAN
TECHNICAL MANUAL
A180E806P02
I
contents
[1] For safe use __________________________________________________ 1
[2] Precautions for use ____________________________________________2
[3] Use__________________________________________________________ 3
[4] Name of each part _____________________________________________ 4
[5] Pin number of connectors _______________________________________ 5
[6] External dimensions ___________________________________________7
[7] Connection method ____________________________________________ 7
1. How to connect XC-G............................................................................................8
2. How to connect PLK-G ..........................................................................................8
[8] Update and setting _____________________________________________ 9
[9] How to use ___________________________________________________10
[10] Confirmation _________________________________________________ 11
[11] Error indication_______________________________________________
12
[12] Specification _________________________________________________ 13
II
Thank you for purchasing this product.
Please read this technical manual before starting to ensure correct and long-term use.
* The contents of this manual may not be reproduced in part or whole.
* The contents of this manual are subject to change without notice.
* An utmost effort has been made to cover all points of operation in this manual. Contact
Mitsubishi if you have any questions regarding the contents.
COPYRIGHT(C)2019 MITSUBISHI ELECTRIC CORPORATION
1
[1] For safe use
For safe use
Always observe the following matters to safely use this product.
Before starting
Before using this product, read all of the technical manuals carefully, and correctly use the unit following
the manual. Also read the instruction manual of the sewing machine to be installed.
Application and purpose
This product is designed as a communication device of the Mitsubishi industrial sewing machine.
Do not use this product for other applications or purposes
Working environment
Please use this product in the industrial setting only. And do not use this product in the following type of
environment.
(1) Power voltage
･Where the voltage fluctuation exceeds ±10% of the rated voltage.
･Where the specified power capacity cannot be ensured.
(2) Magnetic noise
･Where strong fields or magnetic fields are generated, such as near a high-output high frequency
oscillating machine or high frequency welder.
(3) Temperature and humidity
･Where the ambient temperature is 35°C or more and 5°C or less.
･Where the unit will be subject to direct sunlight, or outdoors.
･Near sources of heat, such as heating appliances.
･Where the relative humidity is 45% or less, or 85% or more, and where dew may condense.
(4) Atmosphere
･In an atmosphere containing dust or corrosive gases, etc.
･In a flammable gas or explosive environment.
(5) Vibration
･Where the Excessive vibration (2G or more) or many shocks.
Installation
Please install it correctly according to this manual.
Cable
Lay the connection cables so that excessive force will not be applied during operation. Do not
excessively bend the cables.
Remove
(1) Always turn the power switch OFF of the sewing machine and disconnect the plug from the socket
(power supply line) before removing this product.
(2) Do not pull out the cord when disconnecting the plug. Always hold the plug receptacle when
disconnecting the plug. It may cause cable breakage or poor contact.
Maintenance, inspection and repairs
(1) Follow this manual when carrying out maintenance or inspections related to this product.
(2) This product must be repaired, serviced and inspected only by a worker that has received special
training.
(3) Use genuine replacement parts for repairs and maintenance.
If you use other than genuine parts will be out of warranty.
Other safety measures
(1) Never drop this product, or place objects in the clearances.
(2) If any damage is observed in this product, if the unit does not operate correctly, or if the operation is
suspicious, always suspend using. Please replace this product.
(3) The user must not make improvements or changes without instruction from Mitsubishi
(4) Please also read related manuals of the connected devices carefully and correctly use the unit
following the manual.
2
[2] Precautions for use
1. Do not inspect the control circuit with a tester.
The tester voltage could be applied on the semiconductor parts, and cause damage.
2. Always align the connector shape and direction, and securely insert the connector.
3. Use the machine away from strong noise sources such as high frequency welders.
4. Please never open the case. The mounting of the case screws is torque-controlled, if you tighten the screw
with more torque than the specified torque, the case may be damaged.
5. Do not unplug the RS232C cable of the PLK-J-LAN with the power on.
It may cause malfunction and failure.
6. In order to reduce the influence of high frequency noise, attach the ferrite core to the RS232C cable of
PLK-J-LAN.
7. Notes on turning on the power again
Please make sure not to turn on the power supply switch until after the LED on the front panel side of this
product has completely turned off.
*Please note that if power supply is turned on again while LED still turns on, the data in the PLK-J-LAN
may be damaged.
8. Please take measures by the user against illegal access from the external devices with network,
when it is necessary to keep the safety of PLK-J-LAN system.
Please take measures such as firewall against illegal access from the external devices with network,
when it is necessary to keep the safety of PLK-J-LAN system.
9. When CON C is not used, please attach the cap to CON C to protect it.
10. While the PLK-J-LAN communicates with the PLK-G, do not access the PLK-G such as reading and
writing with the sewing data creation software PTN-GX.
*If the above operation is not observed, the data in the PLK-G may be damaged.
* Always deliver this manual to the end user.
* Store this manual nearby where it can be referred to when necessary.
* Please do not use the information with this product safety and operation of other devices.
3
[3] Use
This product is to enables network communication for the Mitsubishi LIMI SERVO XC-G series
and the Mitsubishi electronic pattern sewing machine PLK-G series.
1. What you can do by connecting the PLK-J-LAN.
CC-Link communication connection
-> Communication equipment that makes XC-G and PLK-G series sewing machines
compatible with CC-Link IE Field Basic network.
It acquires the information such as sewing time from the sewing machine and performs
Ethernet communication with the master station as slave station.
Required network device
Equipment of the master station: Mitsubishi Electric PLC (MELSEC iQ-F、iQ-R series)
Equipment for display: PC, Mitsubishi Electric Visualization etc.
Other equipment: HUB etc.
2. Simplified drawing
CC-Link communication connection
Compatible models
Mitsubishi LIMI Servo
XC-G series
Electronic pattern stitch
sewing machine
PLK-G series
Electronic pattern stitch
sewing machine
PLK-J series
PLK-J-LAN ○ ○‡ -
‡: Some models are not eligible.
For details, please contact the dealer.
○: Compatible with PLK-J-LAN
: Not compatible with PLK-J-LAN, but CC-Link IE Field Basic communication is possible
XC-G10 / XC-G500
XC-G
本製品
HUB
PLC
PC
PLK-J-LAN
PLK-G
Visualization
4
[4] Name of each part
1. Front side
2. Back side
No Name Function
1) LED (green) POWER LED
2) LED (red) Warning LED
3) CON A (USB-Mini B connector) Do not use
4) CON B (MINI-DIN connector) Connect the control switch panel (XC-G10 / XC-G500).
Please do not use when connecting with PLK-G series.
5) RS232C cable (product accessories) Connect to the control box of XC-G or PLK-G.
6) CON C
(General purpose input / output connector) Option port for I/O function.
7) CON D (USB-A connector) USB flash drive and barcode reader can used.
8) CON E (LAN connector) Connect the LAN cable.
USB-A connector of this product
Conditions of application
*USB flash drive ･････ USB1.1 or USB2.0 or USB3.0 compatible USB flash drive
*Barcode reader (HID type)
Inapplicable devices
･USB device requiring an external power supply (including Computer devices)
･USB hard disk drive, keyboard, mouse
･USB flash drive with fingerprint authentication function or with security function
･USB flash drive with hub function
･Media reader
･USB device without data storage function
2)
1) 3)
4)
8)
7)
6)
5)
5
[5] Pin number of connectors
1. CON C
CON C (General purpose input / output connector)
signal Pin number
I1 1
I2 2
GND 3
O1 4
O2 5
12V 6
AN0 7
AN1 8
DA0 9
2. Ratings value of input /output
(1) Output (open collector)
Output Connector pin Ratings current Ratings voltage
O1 CON C 4PIN 100mA less DC 24V less
O2 CON C 5PIN 100mA less DC 24V less
Example of use
(2) Input
Example of use
Inside the
PLK-J-LAN
External power supply
load
Used connector : TE Connectivity 172161-1
Used terminal : TE Connectivity 170362-1
* Please use external power supply as the
power source of the connected equipment.
I1
I2
GND
* Please use GND of PLK-J-LAN for GND.
6
(3) Analog output
Output Connector pin Power Output voltage Maximum ratings current
DA0 CON C 9PIN DC12V DC 0~10V 0.01A less
* Use the input resistance of the connection destination at 1k or more
Example of use
(4) Analog input
Input Connector pin Power Input voltage
AN0 CON C 7PIN DC12V DC 0 to 12V
AN1 CON C 8PIN DC12V DC 0 to 12V
Example of use
PLK-J-
LAN
Power
Input（0~10V）(*1)
GND
(*1): Input resistance 1k or more
* Output total 0.1A or less
PLK-J-
LAN
External volume
resist
or 10
k
Input devise
DC12V
DA0
GND
DC12V
AN0
AN1
GND
7
[6] External dimensions
[7] Connection method
Back
side
Front
side
XC-G control box
PLK-G control box
PC
PLC
HUB
Network device
CON B
CON E
RS232C cable
4.5 ㎜
125.3 ㎜
155.3 ㎜
139 ㎜
40 ㎜
125 ㎜
4.5
Control switch panel
XC-G10 / XC-G500
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Mitsubishi Electric Nähmaschine Handbücher
Mitsubishi Electric
Mitsubishi Electric MP-G10-AO Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-J-CU-20 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric LY2-3300-B0B Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-G2008H-BTRM Technisches Handbuch
Mitsubishi Electric
Mitsubishi Electric DY-253 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric LU2-4652-B1T Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric XC-G500-Y Handbuch
Mitsubishi Electric
Mitsubishi Electric PLK-G5050R Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric LY2-3750-B1T Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric MP-G10-EX Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric MP-J25-PS Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-J10050RH Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric MP-J25-AD Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-G2516R Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric MP-J-PP Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-J10050R Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-J4040RH Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric MP-G10-AH Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-J2516R-YU Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric PLK-G2010R Bedienungsanleitung
