2: General Installation
Before installation please read the following points:
• When placing the unit in position ensure there is adequate access.
• Position carefully adjust the feet making sure the unit is level and does not rock.
• Before installing, it is recommended that the floor is swept clean.
1. Remove all packaging & plastic coatings from the appliance.
2. Check for any damage.
3. Assemble all parts, including shelves etc.
4. Ensure all switches and thermostat controls are in the OFF position.
5. Connect the mains input plug to the socket outlet.
6. Turn on and check the unit is functioning correctly.
Model
FHC1
FHC2
FHC3
Weight
(kg)
17
34
25
Dimensions
L X W X H (mm)
350 x 600 x 900
700 x 600 x 900
525 x 600 x 900
Electrical
Supply
13amp
13amp
13amp
Power Rating
(kw)
0.7
1.0
1.0
Hot storage cupboards are designed for preheating Plates & Dishes, as well as the
temporary storage of pre-cooked food whilst service is in progress e.g.
Cooked meats, poultry, vegetables, sauces, etc.
They are heated via a solid state element fitted in the base with removable perforated
shelving and hinged doors.
The correct Holding temperature is dependent on the food type, amount of food in
container, etc. always keep doors closed whenever possible
These units are not designed to heat up cold food.
5
