8
Issue 2 (4th October 2019)
3: Initial Set-Up
This equipment is designed to be operated by suitably
qualified persons. It is the responsibility of the Supervisor
or equivalent to train users, provide suitable P.P.E., show
the mains isolating switch location, and inform users
that parts may become hot, causing injury if touched.
1. Plug in appliance and establish
power. The stand-by screen will
now be displayed.
2. Select to access the main display
screen. Simply select buttons using
the touch-screen display.
At this stage the LED gantry
operating lights will have illuminated
blue and, if your model has one, the
refridgerator will begin its cycle.
4. To set the unit ID number, select the
number under . The number
pad will re-appear, allowing you to
enter a new ID number.
5. Simply input the new unit ID
(e.g. 25) and select Ent .
3. Select SET-UP MENU. You will
now be prompted to enter the
4-digit administrator passcode
before being able to proceed.
The default passcode is 1234.
It is recommended that this is
restricted and kept safe
by the site responsible person.
