Monoprice 24760 Bedienungsanleitung

Caliber+ 60-Watt 6.5-inch Fiber 2-Way Powered

Ceiling Speakers with Bluetooth®

P/N 24760

User's Manual

CONTENTS

SAFETY WARNINGS AND GUIDELINES.......................................................................................................................................3

INTRODUCTION................................................................................................................................................................................................3

FEATURES..............................................................................................................................................................................................................4

CUSTOMER SERVICE....................................................................................................................................................................................4

PACKAGE CONTENTS.................................................................................................................................................................................4

PRODUCT OVERVIEW.................................................................................................................................................................................5

PAINTING...............................................................................................................................................................................................................6

INSTALLATION TOOLS...............................................................................................................................................................................6

INSTALLATION.................................................................................................................................................................................................. 7

BLUETOOTH PAIRING .................................................................................................................................................................................9

FINE TUNING THE SOUND ....................................................................................................................................................................10

TROUBLESHOOTING ..................................................................................................................................................................................10

TECHNICAL SUPPORT................................................................................................................................................................................11

SPECIFICATIONS.............................................................................................................................................................................................11

REGULATORY COMPLIANCE..............................................................................................................................................................12

Notice for FCC ..........................................................................................................................................................................................12

Notice for Industry Canada...........................................................................................................................................................12

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

This device is intended for indoor use only.

Do not expose this device to water or moisture of any kind. If moisture does get in

or on the device, immediately unplug it from the power outlet and allow it to fully

dry before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet

hands.

If operating this speaker in a humid environment, ensure that no condensation

occurs. Condensation could cause damage to the speaker cone and could cause a

short in the amplifier, which in turn could cause fire or severe electric shock.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

Ensure that power is turned off and disconnected before making any electrical

connections, including speaker wire connections.

INTRODUCTION

Thank you for purchasing this Powered Ceiling Speaker with Bluetooth®! Ceiling speakers

are the ideal combination of sound quality and styling. Rather than cluttering the room

with large box speakers trailing speaker wires, the speakers are virtually invisible, while

filling the room with high fidelity audio. Featuring a removable and paintable magnetic

grille, this 2-way speaker uses a DuPont™ Kevlar® woven fiber cone woofer with rubber

surround for deep, impactful bass, and a 0.75" silk titanium dome tweeter with 15° pivoting

action for smooth, sweet highs.

FEATURES

6.5" DuPont™ Kevlar® woven fiber cone woofer

0.75" silk titanium dome tweeter with 15° pivoting action

Includes both master and slave speakers

Dual 30-watt (RMS) power amplifiers for driving the master and slave speakers

Includes wired RCA and wireless Bluetooth® connections

8 ohms nominal impedance

60Hz ~ 20kHz frequency response

90dB sensitivity

Removable and paintable magnetic grille

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-

6pm PT) or via email at [email protected]

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x Master speaker

1x Slave speaker

2x Speaker grilles (installed)

1x AC power adapter and AC cord

1x Cutting template

1x User's Manual

PRODUCT OVERVIEW

PAINTING

The grilles can be painted to match your ceiling, making the speakers even less noticeable.

Perform the following steps to safely paint them without damaging the speakers.

1. Completely remove the grilles by lifting them off the frames.

2. Paint the speaker grilles. It is best to use spray paint to avoid paint clogging the

holes.

3. Allow the paint to completely dry before proceeding with installation. Ensure that

the holes in the grilles are not blocked by paint.

INSTALLATION TOOLS

The following tools are required for installation.

INSTALLATION

Perform the following steps to install these speakers into your ceiling. Installation requires

knowledge of and experience with best building practices. Thoroughly read all of these

installation steps before beginning installation. If you do not feel totally comfortable with

performing any of these steps, contact a professional installer to perform the installation.

1. Determine where you will mount the master speaker. The master speaker should be

mounted near an AC power outlet in the ceiling.

2. Use a stud finder to locate the ceiling studs around the installation location. Mark

the edges of the ceiling studs with a pencil.

3. If you have not already done so, remove the grille from each speaker.

4. Place the cutting template against the ceiling in the intended installation location,

then mark the cutting line with a pencil.

5. Drill a small hole in the middle of the marked location.

6. Cut open a clothes hanger and straighten it out. Bend the hanger 90° at a point

about 6" from the end. Insert the hanger into the pilot hole, then turn it 360° around

to ensure that there are no obstructions in the cutting area. If there are

obstructions, move the install location and repeat the above steps until you have

identified an unobstructed area.

7. Using a drywall saw, cut along the cut line.

8. Repeat the above steps for the slave speaker.

9. Prepare a two-conductor speaker wire for connecting the slave speaker to the

master speaker. This wire must be rated for in-wall/in-ceiling use.

10. Connect one end of the speaker wire to the speaker input terminals on the slave

speaker, taking care to match the polarity.

11. Using a #2 Philips screwdriver, turn the four dog leg tab mount screws on the slave

speaker counterclockwise to retract the tabs.

12. Feed the loose end of the speaker wire through the installation hole, then insert the

slave speaker into the speaker installation hole.

13. Using a #2 Phillips screwdriver, turn the

four dog leg tab mount screws

clockwise to extend the tabs. Continue

tightening until the speaker is firmly

against the ceiling. Take care not to

over-tighten.

14. Determine whether you will want to

use these speakers in stereo or mono

mode. Slide the stereo/mono switch on the master speaker to the appropriate

position.

15. Determine if you will need to limit the volume, then slide the volume limiter switch

on the master speaker to the 50% or 100% position, as desired.

16. (Optional) Using a stereo RCA patch cable (not included), plug one end into the RCA

input jacks on the master speaker. Next, feed the cable into the installation hole,

then connect the other end into the line output of an audio source device, such as a

CD player or FM tuner. This cable must be rated for in-wall/in-ceiling use.

17. Connect the speaker wire from the slave speaker to the speaker output connectors

on the master speaker, taking care to

match polarity.

18. Plug the DC barrel connector on the

included AC power adapter into the

power input jack on the master speaker.

Next, feed the AC power adapter into

the installation hole, then plug it into an

AC power outlet in the ceiling.

19. Using a #2 Philips screwdriver, turn the four dog leg tab mount screws on the

master speaker counterclockwise to retract the tabs.

20. Insert the master speaker into the speaker installation hole.

21. Using a #2 Phillips screwdriver, turn the four dog leg tab mount screws clockwise to

extend the tabs. Continue tightening until the speaker is firmly against the ceiling.

Take care not to over-tighten.

BLUETOOTH PAIRING

The speaker can be paired with up to two Bluetooth® devices simultaneously, but only one

connection will be active. If actively connected to one device, the other device cannot be

paired and cannot control the speaker. To pair or connect the second device, the

connection to the first device must be broken.

Note that when a Bluetooth connection is active, the physical RCA input is disabled. To use

the physical RCA input, all Bluetooth connections must be broken.

Perform the following steps to pair this speaker system with a Bluetooth audio source

device.

1. When power is first applied the LED indicator on the master speaker will flash

rapidly, indicating that the speaker is in Bluetooth pairing mode. If not, press and

hold the RESET button for 5 seconds, then release the button. This resets the

speaker and puts it into Bluetooth pairing mode.

2. Open the Bluetooth settings on your audio source device and search for available

Bluetooth devices. Select the BT Speaker entry.

3. If you want to pair a second device, turn off Bluetooth on the first device. Once the

connection is lost, the LED on the master speaker will begin flashing again.

4. Open the Bluetooth settings on your second audio source device and search for

available Bluetooth devices. Select the BT Speaker entry.

FINE TUNING THE SOUND

1. Start audio playback on one of your audio source devices.

2. Carefully aim the tweeters on the two speakers toward your listening area.

3. If the sound is too bright, slide the Environmental Equalizer switch to the -(minus)

position. If the sound is suppressed or muddy sounding, slide the Environmental

Equalizer switch to the +(plus) position.

4. Once you are happy with the quality of sound, replace the magnetic grilles onto the

two speakers.

Congratulations, your new Bluetooth® ceiling speakers are installed, connected, and tuned

for the best possible sound quality!

TROUBLESHOOTING

Q1: The Bluetooth speaker cannot be found during the Bluetooth® pairing process.

A1: Check the LED on the master speaker to ensure that the speaker is powered on. Ensure

that the LED is flashing, indicating that it is in Bluetooth pairing mode. If not, press and

hold the RESET button for 5 seconds to reset the speaker and clear all previous

Bluetooth pairings.

Q2: The speaker fails to connect to the Bluetooth device.

A2: Ensure that your Bluetooth device is located as close as possible to the speaker. If your

Bluetooth device prompts for a password, type 0000 (four zeros).

Q3: The Bluetooth source device is connected to the speaker, but no sound can be heard.

A3: Verify that your device is playing audio. Ensure that your device is not muted. Increase

the volume level.

Inhaltsverzeichnis

Andere Monoprice Sprecher Handbücher

Monoprice

Monoprice 11948 Bedienungsanleitung

Monoprice

Monoprice 14890 Bedienungsanleitung

Monoprice

Monoprice DT-3 Bedienungsanleitung

Monoprice

Monoprice 14446 Bedienungsanleitung

Monoprice

Monoprice 13259 Bedienungsanleitung

Monoprice

Monoprice 10920 Bedienungsanleitung

Monoprice

Monoprice Soundstage 3 Bedienungsanleitung

Monoprice

Monoprice HarmonyMini Bedienungsanleitung

Monoprice

Monoprice 34197 Bedienungsanleitung

Monoprice

Monoprice Pro Audio Series Bedienungsanleitung

Monoprice

Monoprice 43257 Bedienungsanleitung

Monoprice

Monoprice DT-4BT Bedienungsanleitung

Monoprice

Monoprice 44884 Bedienungsanleitung

Monoprice

Monoprice 33828 Bedienungsanleitung

Monoprice

Monoprice Harmony Capsule 200 Bedienungsanleitung

Monoprice

Monoprice SSVC-6.1 Bedienungsanleitung

Monoprice

Monoprice Harmony XL Bedienungsanleitung

Monoprice

Monoprice MP True Bedienungsanleitung

Monoprice

Monoprice MS-03 Bedienungsanleitung

Monoprice

Monoprice 14887 Bedienungsanleitung

Monoprice

Monoprice Harmony Capsule 300 Bedienungsanleitung

Monoprice

Monoprice 13193 Bedienungsanleitung

Monoprice

Monoprice 13264 Bedienungsanleitung

Monoprice

Monoprice Harmony XL Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung