Monte Carlo Fan Company Studio series Bedienungsanleitung

Page 1 3SU54-CUL- EN

Ceiling Fan Installation Instructions

READ AND SAVE THESE INSTRUCTIONS

STUDIO...SERIES

Total fan wieght

OWNER’S

MANUAL

Page 2 3SU54-CUL- EN

INSTALLATION

Safety Tips

WARNIN : TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWIN :

1. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and

standards(ANSI/NFPA 70-1996), including fire-rated construction.

2. Use this unit only in the manner intended by the manufacurer. If you have any questions contact the manufacturer.

3. After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding

conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

4. Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from

being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

such as a tag, to the service panel.

5. Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly dia-

grams.

6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 10

feet from the floor to the trailing edge of the blade.

8. To reduce the risk of fire, electric shock, or personal injury, this fan must be mounted to an outlet box marked suitable for fan

support. And use mounting screws provided with the outlet box. (Mounting must support at least 35 lbs.)

9. Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating

blades.

10.Attach the mounting bracket using only the hardware supplied with the outlet box.

11.To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed

control.

12.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13.NEVER place a switch where it can be reached from a tub or shower.

14.The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the

heating equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association

(NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15.Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from

being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

such as a tag, to the service panel.

TOOLS REQUIRED

Phillips Screwdriver Wire Cutters Pliers Step Ladder

Cotter Pin

Feed motor lead wires through downrod/

canopy assembly and insert downrod into

motor yoke. Next, insert clevis pin through

yoke and downrod and secure with

cotter pin. Tighten both yoke set

screws to further secure downrod.

Slide down yoke cover.

Yolk Cover

Clevis Pin

Set Screws

Install mounting plate to outlet

box in ceiling using the two 8-32

screws and washers provided with

outlet box.

Unpack and inspect fan

carefully to be certain all contents

are included. Turn off power at fuse

box to avoid possible electrical shock.

Use outlet box suitable for fan use.

Secure outlet box directly to the

building structure using ceiling

joist screws (included). Outlet box

must be able to support 35 lbs.

Page 3 3SU54-CUL- EN

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED ACCEPTABLE OR AN SUPPORT

All set screws must be checked and retightened where necessary before installation.

CANADIAN SA ETY TIPS

While the fan assembly is still on

the ground thread the safety cable

through the mounting bracket.

safety

cable

mounting

bracket

Lift fan assembly and install the safety cable

directly to the building structure using the

3" lag screw and plain washer provided.

Before proceeding to the next step make

sure that the cable is properly installed and

will support the fan weight. Make

sure the screw washer and safety

cable are installed using the order

pictured above.

Ball

Notch

Install mounting bracket to outlet

box in ceiling using the screws

provided with the outlet box and

washers.

Feed motor lead wires through downrod/

canopy assembly and insert downrod into

motor yoke. Next, insert clevis pin through

yoke and downrod and secure with

cotter pin. (see inset) Tighten both

yoke set screws to further secure

downrod.

Clevis

Pin Set

Screws

Cotter

Ridge

plain

washer

safety

cable

lag

screw

Set

screw

A. Carefully lift fan assembly onto mount-

ing bracket. Rotate fan so that the notch

on the ball engages the ridge in the

mounting bracket. This will allow

hands-free wiring. For wiring

instructions please refer to page 4

step #6

CANADIAN MOUNTING SYSTEM INSERT

Page 4 3SU54-CUL- EN

Insert blade through motor and light

housing. Align holes in motor woth

holes in blade and install screws to

blade through hole in light housing. 9Install light housing cap using

screws provided.

Note:

INSTALLATION

After installation, please refer to operation, maintenance

and troubleshooting sections in this manual

Raise the canopy up and align the two

holes in the canopy with the two holes

in the hanger bracket. Secure with

two 5/32 x 1/2" screws provided.

Ridge Ball

Notch

Carefully lift fan assembly onto mounting

bracket. Rotate fan so that the

notch on the ball engages the ridge

in the mounting bracket. This will

allow hands-free wiring.

*ATTACH BLUE WIRE

ONLY IF ATTACHIN

LI HT KIT WITH FAN

Secure with

twist-lock wire

connectors

(included)

STANDARD WIRING OPTION

For pullchain controls, follow diagram above.

Make sure that all exposed wiring is secured

inside wire nuts. Note: Wires from house may

vary in color and may not include

ground wire. After wiring is conplete,

gently push wires into junction box with

wire nuts pointing upward.

Page 5 3SU54-CUL- EN

TROUBLE SUGGESTED REMEDY

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation,

or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults,

please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty

in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.

2. If fan sounds

noisy:

1. If fan does not

start:

TROUBLESHOOTIN UIDE

Check main and branch circuit fuses or circuit breakers.

Check line wire connections to fan and switch wire connections in switch housing.

CAUTION: Make sure main power is turned off.

Check to make sure all screws in motor housing are snug (not over tightened).

Check to make sure wire nut connectors in switch housing are not rattling against each other or

against the interior wall of the switch housing.

CAUTION: Make sure main power is turned off before entering switch housing.

Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT

USE a Solid State variable speed control.

Allow "break-in" period of 24 hours. Most noises associated with a new fan will disappear after

this period.

All blades are weighed and grouped by weight. Natural woods vary in density which could cause

the fan to wobble even though all blades are weight-matched. The following procedures should

eliminate most of the wobble. Check for wobble after each step.

Check that all blades are screwed firmly into blade holders.

Check that all blade holders are tightened securely to motor.

Make sure that canopy and mounting bracket are tightened securely to ceiling junction box and

junction box is mounted firmly to ceiling joist.

If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redis-

tribute the weight and possibly result in smoother operation.

Check blue wire from fan to make sure it is connected to blue wire from Remote Receiver.

Check for loose or disconnected wires in fan switch housing.

Check for faulty light bulbs.

CAUTION: Make sure main power is turned off before entering switch housing.

4. If light does not

work:

3. If fan wobbles:

CUSTOMER SERVICE CENTER:

2900 WEST SEMINARY DR.

FORT WORTH, TEXAS 76133

1-800 519 4092

Page 6 3SU54-CUL- EN

3/2/0 REV.0 3SU54 English UL

Andere Monte Carlo Fan Company Lüfter Handbücher

Monte Carlo Fan Company

Monte Carlo Fan Company 5KC48 Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5ALR56 Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5EM60 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5GFR52 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3DIR52RZWD-V1 Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company Lowden 5LWDR52 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3AVLR54 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5SRR54XXD Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5NCR56 Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5DIW52 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company Prairie 14PRR52 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5DCR60XX Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company ERA 3ERHR44 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3JVR44 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company MC5B241 Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5BS52 Builder Supreme Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 3MUR52XXD Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5DS44 Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 3BWR50XXD Series Fan Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5LLR56 D-V1 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5DS52 Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5DCR60XX Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 3BRYSM60D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3JVR58 D Series Gebrauchsanweisung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung

Monte Carlo Fan Company studio series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken