Morphy Richards Supervac gold Bedienungsanleitung

VC7310011MUK Rev1

www.morphyrichards.co.uk/blog

For competitions, product hints and tips

and more join us at

Please read and keep these instructions for future use

www.facebook.com/morphyrichardsuk

@loveyourmorphy

CHARGE THE PRODUCT FULLY BEFORE FIRST USE

*Register at www.morphyrichards.co.uk/support

UK and Ireland customers only

I PORTANT: aintain your product to ensure optimum performance and

product life. Please read the maintenance section thoroughly.

The guarantee may be invalidated if the motor is damaged due to: using the

appliance without the filter(s) installed; not cleaning the filter(s); not replacing

a damaged filter; not clearing any blockages.

Cordless Vacuum Cleaner

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 1

Health and Safety

•WARNING: Whenever the cleaner is in use, due to the risk of

entrapment in rotating parts, keep loose clothing, hair, fingers etc.

away from the brush bar, nozzle and any handheld accessories.

•WARNING: Disconnect from the mains supply and remove the

handheld vacuum cleaner (6) before carrying out any routine

maintenance, such as cleaning any blockages, changing any filters,

accessing the motorised floor brush or removing the battery.

•WARNING: isuse of the appliance could cause personal injury.

•This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, if they have been given supervision

or instruction concerning the use of the appliance in a safe way and

understand the hazards involved.

•Only use the mains adaptor supplied with the unit.

•The appliance must be disconnected from the supply mains before

removing the battery.

•Children shall not play with the appliance.

•Cleaning and user maintenance shall not be undertaken by children

without supervision.

•If the battery is damaged, do not use or try to charge it. Contact the

helpline on the back page.

•Refer to page 11 for disposal of the product and battery.

Personal safety

• WARNING: Only lift the product by the handle (2) and

never pick the cleaner up by the motorised floor

brush.

•To prevent accidental contact with the rotating brush bar,

always remove the motorised floor brush (19) during

maintenance.

•Never use in the presence of explosive liquid or vapours.

•Never pick up inflammable or poisonous liquids such as

petrol, copier toner or other volatile substances. Never

pick up acids, asbestos or asbestos dust.

•Never touch the adaptor, product or cable with wet

hands.

•Unprofessional repairs can be dangerous for users.

•To protect against fire, electric shock and personal injury,

do not immerse cord, mains adaptor or cleaner in water

or other liquid.

•The appliance must never be left running unsupervised.

Location

•Do not use or keep this product outside.

•Do not store the appliance near hot surfaces eg. ovens or

heating appliances.

Product safety

•This appliance is not intended for liquid/wet pick up.

•Never use the appliance without the filter being installed.

•Never use the appliance to vacuum hot ashes, broken

glass, sharp objects or liquids.

•Never modify the cleaner in any way.

•Use only Morphy Richards spare parts and accessories.

Electrical requirements

•Check that the voltage on the rating plate of the mains

adaptor corresponds with your house electricity supply

which must be A.C. (Alternating Current).

•The battery is not a serviceable item. Remove at the end

of the product’s life for recycling.

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 2

Features

(1) On/Off button

(2) andheld vacuum

cleaner handle

(3) Battery

(4) andheld charging inlet

(5) Dust canister release

button

(6) andheld vacuum

cleaner

(7) Charge indicator lights

(8) Foam filter

(9) Dust canister filter

(10) Dust canister

(11) Dust canister swing base

release button

(12) Extension tube release

button

(13) Extension tube handheld

connection end

(14) Extension tube

(15) andheld vacuum

cleaner suction inlet

(16) Dust canister swing base

(17) Extension tube suction

end

(18) Motorised floor brush

release button

(19) Motorised floor brush

(20) Floor brush lights

(21) Storage mount

(22) Mains adaptor connector

(23) Mains adaptor

(24) Dusting brush /

upholstery nozzle

(25) Crevice tool

Product overview

8 9

1 2

1615

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 3

ultiple functionality

Your vacuum cleaner can easily be configured into three different cleaning modes:

•Vacuum cleaner for floors and carpets.

•andheld vacuum cleaner which can be carried with you whilst cleaning.

•Extended reach vacuum cleaner for cleaning hard to reach places such as high coving etc.

Handheld

vacuum

cleaning

Extended

reach

cleaning in

handstick

mode

Floor

vacuum

cleaning in

handstick

mode

Storage mount fixing

the ground

88mm

100cm is the minimum height above

the ground for wall mounting if you wish

to have the floor nozzle horizontal with

the floor.

If you wish to have the floor nozzle

parallel with the wall, it should be

mounted at a minimum of 112cm.

NOTE: The mounting must be within

1.5 metres of a mains outlet socket

to enable the mains adaptor to reach.

The storage mount (21) must be fixed to a

suitable, strong wall.

Two wall plugs for solid walls (eg brick) and

compatible screws are included with the product.

If your mounting wall is not a solid brick wall then

other appropriate wall plugs/screws will need to

be used.

The position of the two holes for the fixing of the

plugs should be as shown in the diagram (see

left).

WARNING: Always take care when drilling

walls. Ensure the wall is safe and sturdy and

ensure there are no plumbing, gas or electrical

routes within the wall

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 4

Set up and charging

Charge the product fully before first use.

1Insert the mains adaptor connector (22) into the

charging inlet (4) on the side of the handheld

vacuum cleaner (6). Connect the mains adaptor

into the mains supply.

2During charging, the charge indicator lights (7)

will illuminate with slow pulses. There are five

charge indicator lights that will illuminate in turn

as the product charges. When charging is

complete, the charge indicator lights will stay on

for five minutes before extinguishing. A full

charge will take approximately 5 hours.

When fully charged, disconnect the mains

adaptor from the handheld charging inlet and

unplug the mains adaptor from the mains supply.

In extreme conditions, batteries may be subject

to leakage. If touched, wash skin with hot soapy

water.

WARNING: Do not try to use or recharge the

battery in this condition.

Only use the battery supplied with this product.

NOTE: Always make sure the device is turned off

before charging.

Upright vacuuming: assembly

1Push the extention tube (14) into the neck of the

motorised floor brush (19) until it clicks into place,

ensuring the electrical connectors marry together.

2Push the handheld vacuum cleaner (6) into the

extension tube until it clicks into place, ensuring

the electrical connectors marry together.

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 5

Switching on and power settings

Assemble the product for upright vacuum cleaning

(see ‘Upright vacuuming: assembly’).

To switch ON, slide the On/Off button (1) forward. At

the first position the product will switch on at LOW

power, push the slider again to the second position for

IG power. Slide the button rearwards to switch back

to LOW power or OFF.

The IG setting will produce the best cleaning results

for the majority of cleaning tasks. Using on LOW power

will be sufficient for light cleaning and will extend the

usage time before the battery needs recharging.

If the motorised floor brush (19) is fitted, the brush will

rotate and the floor brush lights (20) will illuminate.

NOTE: As the battery discharges during use, the

number of illuminated charge indicator lights (7) will

reduce until all lights extinguish. The product must

then be recharged.

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 6

Handheld vacuum cleaning

andheld vacuum cleaning is ideal for

cleaning stairs, curtains and upholstery.

To separate the

extension tube

(14) from the

handheld vacuum cleaner (6), press the

extension tube release button

(12) and pull the

extension tube

away from the handheld

vacuum cleaner.

To attach the motorised floor brush (19) to the

handheld vacuum cleaner (6), push the neck of

the motorised floor brush onto the handheld

vacuum cleaner suction inlet (15) until it clicks

into place.

To separate the motorised floor brush from the

handheld vacuum cleaner, press the motorised

floor brush release button (18) and pull the

motorised floor brush away from the handheld

vacuum cleaner.

Assemble the product for handstick vacuum

cleaning (see ‘Upright vacuuming: assembly’,

page 5)

For extra reach whilst cleaning high areas like

coving etc, use the crevice tool (25) or dusting

brush / upholstery nozzle (24) in place of the

motorised floor brush (19).

Alternatively, you may wish to use the crevice

tool (25) or dusting brush / upholstery nozzle (24)

in place of the motorised floor brush (19).

The tool fits directly onto the suction inlet (15) on

the handheld vacuum cleaner (6). To remove it

again, pull it firmly away.

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 7

The guarantee may be invalidated if the motor

is damaged due to: using the appliance

without the filter(s) installed; not cleaning the

filter(s); not replacing a damaged filter; not

clearing any blockages.

WARNING: Always remove the mains adaptor

(23)

from the mains supply before undertaking

any maintenance or cleaning procedures.

Your cleaner is manufactured to withstand normal

day-to-day use, but occasionally wipe over with a

damp cloth to help maintain its good looks. Take

care not to get the electrical connections wet.

Abrasive cleaners should not be used.

Empty the dust canister (10) regularly even if it

does not look full, this will maintain the

performance.

To ensure optimum suction and performance, we

recommend that the canister is only filled to the

line shown on the side of the canister.

We recommend cleaning the foam filter (8) and

dust canister filter (9) and checking for any

blockages every time the dust canister (10) is

emptied.

1. Disconnect the extension tube (14) from the

handheld vacuum cleaner (6).

2. olding the handheld vacuum cleaner in one

hand (whilst simultaneously pressing the dust

canister release button (5) with your thumb),

firmly hold the bottom of the dust canister (10)

with your other hand and pull the dust canister

away from handheld vacuum cleaner.

3. olding the dust canister (10) over a dustbin,

press the dust canister swing base release button

(11) down to release the swing base (16), allowing

it to swing open and empty the dirt. After the dirt

has been emptied swing the base closed and

press until it clips shut.

aintenance

aintenance - emptying

the dust canister and

cleaning the filters

Press

button

here

Hold

firmly

here Pull

24 25

Using the attachments

Crevice tool and brushes

Dusting brush (24) for carpet, upholstery and stairs etc.

Upholstery nozzle

(24)

for upholstery and bedding etc.

Slide the dusting brush back by clicking the button on

the attachment - this reveals the upholstery nozzle.

Crevice tool (25) for awkward places, corners and

behind radiators etc. This tool is also useful on stairs.

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 8

Remove the foam filter (8) from the dust canister

filter (9).

5.Dust off the foam filter each time the dust

canister is emptied.

Every month, wash the foam filter in luke-warm

water and thoroughly air dry before re-fitting.

6. Use the tab to pull out the dust canister filter (9)

from the dust canister.

7. Brush clean all parts of the dust canister filter

to remove any hairs or fibres each time the

dust canister is emptied.

8. If necessary for further cleaning, the dust canister

filter may be separated by holding the top of the

filter and the tab at the bottom and rotating in

opposite directions, then pull the two sections

apart. To reassemble, use the reverse action.

9.To refit the dust canister filter (9) back into the

dust canister (10), a lign the rectangular holes on

each part and slot the dust canister filter back

into the dust canister.

10.

Refit the foam filter (8) into the dust canister filter (9).

11. Refit the dust canister (10) by locating the recess

at the top of the canister onto the mating tab on

the handheld vacuum cleaner (6) then push the

canister onto the handheld vacuum cleaner until it

locks into place.

I PORTANT:

All the

filters and the dust canister may be

washed in luke-warm water, but please note:

a) Not in hot water.

b) No detergent should be used.

c) All the parts must be left to air-dry before

refitting.

d) Do not use heated appliances to dry.

Never use the product without the filters being

in place.

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 9

WARNING: The motorised floor brush (19)

must be removed before any maintenance

operations.

WARNING: Take care when using tools and

sharp objects.

1.If the motorised floor brush (19) is stalled, for

example by a foreign object or by use on a very

deep-pile carpet, a motor protection device will

operate and the motor will stop and the floor

brush lights (20) will extinguish. To reset the

protection, first switch off, then remove the

motorised floor brush from the extension tube or

handheld vacuum cleaner. Check and remove any

blockage before refitting the motorised floor

brush to the extension tube or handheld vacuum

cleaner. Provided the blockage has been

removed, the protection should reset itself when

the product is switched on.

To clean the motorised floor brush, turn the unit

off, press the motorised floor brush release button

(18) and pull the motorised floor brush away.

3. Turn the motorised floor brush (19) over to

inspect the rotating brush bar (19a).

4. Using a small flat bladed screwdriver gently turn

the locking button (19b) 1

/8 turn anti-clockwise to

unlock the cover. Remove the cover (19c). Using

the small flat bladed screwdriver underneath the

end of the rotating brush, gently lift the rotating

brush bar (19a) out.

5.Pull away any hairs or fibres from around the

rotating brush bar (19a). If they are tightly wound

around the brush carefully snip the fibres/hairs

with scissors using the groove in the brush to

assist. Take care not to damage the brush

bristles. Inspect both ends of the brush for hairs

& fibres and remove if necessary. The end cap of

the brush that sits underneath the brush bar

cover (19c) should rotate freely.

6. Before refitting the rotating brush bar (19a),

check to ensure there are no blockages in the

inlet aperture of the motorised floor brush

(19).

7. Refit the rotating brush bar (19a) and brush bar

cover (19c) in their original position and re-lock

the locking button (19b).

•“Does not pick-up”/ “ otorised floor-brush

running slow or soon stops”

Check for hairs/fibres that may be wrapped

around the rotating brush-bar.

IMPORTANT: Remove the rotating brush bar as

described on page 10. Fine hairs or fibres may be

caught in the ends of the rotating brush bar.

Carefully remove the hairs and re-fit the rotating

brush bar.

•“Does not pick-up from floor, no suction but

the motorised floor brush is rotating”

Switch off the product, remove the motorised

floor brush (19) and the extension tube (14) and

check for blockages in both. Check also the

air-path in the handheld vacuum cleaner (6)

between the dust canister (10) and the

handheld vacuum cleaner suction inlet (15).

This air-path contains a one-way flap to

prevent dirt from falling out of the dust

canister, this flap must move freely.

•“Does not pick-up” / “Suction of handheld

cleaner has reduced”

In addition to emptying the dust canister, it is very

important that the filters are regularly and

thoroughly cleaned. See pages 8 and 9 for details

of how to access and clean the filters.

aintenance - troubleshooting

aintenance - motorised

floor brush

19c19b19a

19c19a

Areas to

check for

blockages

VC731011MUK Rev1.qxp_Instructi n B k 05/03/2020 10:44 Page 10

Inhaltsverzeichnis

Andere Morphy Richards Staubsauger Handbücher

Morphy Richards

Morphy Richards ORB PETS CYCLONE VACUUM CLEANER - REV 1 Bedienungsanleitung

Morphy Richards

Morphy Richards ESSENTIALS BAGLESS VACUUM CLEANER - REV 1 Bedienungsanleitung

Morphy Richards

Morphy Richards PERFORMAIR CYCLONIC VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards PerformAir Upright Vacuum Bedienungsanleitung

Morphy Richards

Morphy Richards 73332 Bedienungsanleitung

Morphy Richards

Morphy Richards Scoot cylinder vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards PerformAir Upright Vacuum Bedienungsanleitung

Morphy Richards

Morphy Richards 73313 Bedienungsanleitung

Morphy Richards

Morphy Richards Storm hard floor cylinder vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards 732000 Supervac Bedienungsanleitung

Morphy Richards

Morphy Richards IB73350 Bedienungsanleitung

Morphy Richards

Morphy Richards IB71061 Bedienungsanleitung

Morphy Richards

Morphy Richards 73270 Bedienungsanleitung

Morphy Richards

Morphy Richards 70317 Bedienungsanleitung

Morphy Richards

Morphy Richards ESSENTIALS BAGLESS VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards ESSENTIALS CYLINDER VACUUM CLEANER - REV 3 Bedienungsanleitung

Morphy Richards

Morphy Richards Essentials 73179 Bedienungsanleitung

Morphy Richards

Morphy Richards IB73120 Bedienungsanleitung

Morphy Richards

Morphy Richards SpillMaster Bedienungsanleitung

Morphy Richards

Morphy Richards POD CYCLONE VACUUM CLEANER - REV 1 Bedienungsanleitung

Morphy Richards

Morphy Richards IB73370 Bedienungsanleitung

Morphy Richards

Morphy Richards Upright and Handheld Steam Cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards IB70061 Bedienungsanleitung

Morphy Richards

Morphy Richards CYCLONIC BAGLESS VACUUM CLEANER - REV 4 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch