Moxa Technologies IoLogik E2200 Series Bedienungsanleitung

www.moxa.com

ioLogik E2200 Series

Smart Ethernet remote I/O with Click&GO Logic

Features and Benefits

•Front-end intelligence with patented Click&Go control logic, up to 4 rules

•Active communication with MX-AOPC UA Server

•Saves time and wiring costs with peer-to-peer communications

•Supports SNMP v1/v c/v3

•Friendly configuration via web browser

•Simplifies I/O management with MXIO library for Windows or Linux

•Wide operating temperature models available for -40 to 75°C (-40 to 167°F)

environments

Certifications

Introduction

Moxa’s ioLogik E 00 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to

control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s

ioLogik E 00 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to

the server only when state changes or configured events occur. Additionally, the ioLogik E 00 features SNMP for communications and control

using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured

specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling

methods.

PC-Free Alarm and Control Intelligence

This device supports simple yet powerful Click&Go™ technology to

configure event-driven reports and alarms delivered over email, TCP/

UDP, or SNMP traps, giving you a powerful and effective tool for

delivering timestamped status updates in real time.

With built-in Click&Go™ intelligence, this device can be configured

for simple outputs paired up with simple input triggers without the

need for a PC controller. This allows it to be configured to

automatically report I/O events according to conditions specified by

the user.

SNMP for Ethernet evice Management

By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O

registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT

professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is

ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and

transportation.

www.moxa.com

Push Technology for Events and Alarms

When used with MX-AOPC UA Server, devices can use active push

communications when communicating changes in state and/or

events to a SCADA system. Unlike a polling system, when using a

push architecture for communications with a SCADA system,

messages will only be delivered when changes in state or configured

events occur, resulting in higher accuracy and lower amounts of data

that need to be transferred.

Specifications

Control Logic

Language Click&Go

Input/Output Interface

Digital Input Channels ioLogik E 10 Series: 1

ioLogik E 1 Series: 8

ioLogik E 14 Series: 6

Digital Output Channels ioLogik E 10/E 1 Series: 8

ioLogik E 60/E 6 Series: 4

Configurable DIO Channels (by software) ioLogik E 1 Series: 4

ioLogik E 4 Series: 1

Relay Channels ioLogik E 14 Series: 6

Analog Input Channels ioLogik E 40 Series: 8

ioLogik E 4 Series: 4

Analog Output Channels ioLogik E 40 Series:

RTD Channels ioLogik E 60 Series: 6

Thermocouple Channels ioLogik E 6 Series: 8

Buttons Reset button

Rotary Switch 0 to 9

Isolation 3k VDC or k Vrms

Digital Inputs

Connector Screw-fastened Euroblock terminal

Sensor Type ioLogik E 10 Series: Dry Contact and Wet Contact (NPN)

ioLogik E 1 /E 14/E 4 Series: Dry Contact and Wet Contact (NPN or PNP)

I/O Mode DI or event counter

Dry Contact On: short to GND

Off: open

Wet Contact (DI to GND) On: 0 to 3 VDC

Off: 10 to 30 VDC

Counter Frequency 900 Hz

www.moxa.com

Digital Filtering Time Interval Software configurable

Points per COM ioLogik E 10 Series: 1 channels

ioLogik E 1 /E 4 Series: 6 channels

ioLogik E 14 Series: 3 channels

Digital Outputs

Connector Screw-fastened Euroblock terminal

I/O Type Sink

I/O Mode DO or pulse output

Current Rating 00 mA per channel

Pulse Output Frequency 1 kHz

DIO Output Leakage Current 4.0 mA @ 4 VDC

Over-Current Protection 0.65 A per channel @ 5°C

Over-Temperature Shutdown 175°C (min.)

Over-Voltage Protection 45 VDC (typical)

Relays

Connector Screw-fastened Euroblock terminal

Type Form A (N.O.) power relay

I/O Mode Relay or pulse output

Pulse Output Frequency 0.3 Hz at rated load

Contact Current Rating Inductive load: A @ 30 VDC, 50 VAC, 110 VAC

Resistive load: 5 A @ 30 VDC, 50 VAC, 110 VAC

Minimum Permitted Load 1 A @ 5 VDC

Contact Resistance 100 milli-ohms (max.)

Electrical Endurance 100,000 operations @ 5 A resistive load

Mechanical Endurance 1,000,000 operations

Note Ambient humidity must be non-condensing and remain between 5 and 95%. The relays

may malfunction when operating in high condensation environments below 0°C.

Analog Inputs

Connector Screw-fastened Euroblock terminal

I/O Mode Voltage/Current

I/O Type Differential

Resolution 16 bits

Input Range ioLogik E 40 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 0 mA, 4 to 0 mA

ioLogik E 4 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V,

0 to 10 V, 0 to 0 mA, 4 to 0 mA

Accuracy ioLogik E 40/E 4 :

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

ioLogik E 40-T/E 4 -T:

www.moxa.com

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

±0.5% FSR @ -40 to 75°C

Sampling Rate ioLogik E 40 Series:

All Channels: 10 samples/sec for voltage; 6 samples/sec for current

Per Channel: 1. 5 samples/sec for voltage; 0.75 samples/sec for current

Single channel: 1. 5 samples/sec for voltage; 0.75 samples/sec for current

ioLogik E 4 Series:

All channels: 3 samples/sec

Per channel: 8 samples/sec

Single channel: 100 samples/sec

Built-in Resistor for Current Input 1 0 ohms

Input Impedance ioLogik E 40 Series: 900 kilo-ohms (min.)

ioLogik E 4 Series: 00 kilo-ohms (min.)

Over-Voltage Protection - 5 to +30 VDC (power on)

-35 to +35 VDC (power off)

Analog Outputs

Connector Screw-fastened Euroblock terminal

I/O Mode Voltage/Current

Output Range 0 to 10 VDC

4 to 0 mA

Resolution 1 -bit

Accuracy ioLogik E 40:

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

ioLogik E 40-T:

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

±0.5% FSR @ -40 to 75°C

Load (Current Mode) Internal power: 50 ohms (max.)

RTDs

Connector Screw-fastened Euroblock terminal

Sensor Type JPT100, JPT 00, JPT500 (- 00 to 640°C)

JPT1000 (- 00 to 350°C)

NI100, NI 00, NI500 (-60 to 50°C)

NI1000 (-60 to 150°C)

NI1 0 (-80 to 60°C)

PT1000 (- 00 to 350°C)

PT50, PT100, PT 00, PT500 (- 00 to 850°C)

Resistance of 310, 6 0, 1 50, and 00 ohms

Input Connection - or 3-wire

Sampling Rate All channels: 1 samples/sec

Per channel: samples/sec

Resolution 0.1°C or 0.1 ohms

www.moxa.com

Accuracy ioLogik E 60:

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

ioLogik E 60-T:

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

±0.5% FSR @ -40 to 75°C

Input Impedance 6 5 kilo-ohms (min.)

Thermocouples

Connector Screw-fastened Euroblock terminal

Sensor Type J, K, T, E, R, S, B, N

Millivolt Type ±19.53 mV

±39.06 mV

±78.1 6 mV

Fault and over-voltage protection: -35 to +35 VDC (power off); - 5 to +30 VDC (power

on)

Resolution 16 bits

Millivolt Accuracy ioLogik E 6 :

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

ioLogik E 6 -T:

±0.1% FSR @ 5°C

±0.3% FSR @ -10 to 60°C

±0.5% FSR @ -40 to 75°C

TC Accuracy Types J, T, E, S, B: ±5°C

Types K, R, N: ±8°C

CJC Accuracy ±0.5°C @ 5°C

±1.5°C @ -40 to 75°C

Sampling Rate All channels: 1 samples/sec

Per channel: 1.5 samples/sec

Input Impedance 1 mega-ohms (min.)

LED Interface

LED Indicators PWR, RDY, Serial, I/O Status

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) 1

Magnetic Isolation Protection 1.5 kV (built-in)

Ethernet Software Features

Configuration Options Windows Utility (ioAdmin), Web Console (HTTP)

Industrial Protocols Modbus TCP Server (Slave), SNMPv1/v c/v3, SNMPv1 Trap, Moxa AOPC (Active Tag),

MXIO Library, CGI commands

Management BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP

MIB Device Settings MIB

Time Management SNTP

www.moxa.com

Modbus TCP

Functions Supported 1, , 3, 4, 5, 6, 15, 16

Mode Server (Slave)

Serial Interface

Connector Terminal block

Serial Standards RS-485

No. of Ports 1

Baudrate 1 00, 400, 4800, 9600, 19 00, 38400, 57600, 115 00 bps

Parity None

Data Bits 8

Stop Bits 1

Flow Control None

Serial Signals

RS-485- w Data+, Data-, GND

Serial Software Features

Industrial Protocols Modbus RTU Master

Platform

Real-time Clock (RTC) Real-time clock with battery backup

Power Parameters

Power Connector Screw-fastened Euroblock terminal

No. of Power Inputs 1

Input Voltage 1 to 36 VDC

Power Consumption ioLogik E 10 Series: 0 mA @ 4 VDC

ioLogik E 1 Series: 136 mA @ 4 VDC

ioLogik E 14 Series: 170 mA @ 4 VDC

ioLogik E 40 Series: 198 mA @ 4 VDC

ioLogik E 4 Series: 178 mA @ 4 VDC

ioLogik E 60 Series: 95 mA @ 4 VDC

ioLogik E 6 Series: 160 mA @ 4 VDC

Physical Characteristics

Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)

Weight 50 g (0.55 lb)

Installation DIN-rail mounting, Wall mounting

Wiring I/O cable, 16 to 6 AWG

Power cable, 16 to 6 AWG

Housing Plastic

Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included) -40 to 85°C (-40 to 185°F)

www.moxa.com

Ambient Relative Humidity 5 to 95% (non-condensing)

Altitude 000 m1

Standards and Certifications

Safety UL 508

EMC EN 61000-6- /-6-4

EMI CISPR 3 , FCC Part 15B Class A

EMS IEC 61000-4- ESD: Contact: 4 kV; Air: 8 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: kV; Signal: 1 kV

IEC 61000-4-5 Surge: Power: 1 kV

IEC 61000-4-6 CS: 10 V

IEC 61000-4-8 PFMF

Shock IEC 60068- - 7

Vibration IEC 60068- -6

Freefall IEC 60068- -3

Declaration

Green Product RoHS, CRoHS, WEEE

MTBF

Time ioLogik E 10 Series: 13,673 hrs

ioLogik E 1 Series: 17,7 hrs

ioLogik E 14 Series: 307,3 9 hrs

ioLogik E 40 Series: 155,941 hrs

ioLogik E 4 Series: 04,391 hrs

ioLogik E 60 Series: 3 7, 8 hrs

ioLogik E 6 Series: 341,063 hrs

Standards Telcordia SR33

Warranty

Warranty Period ioLogik E 14 Series: years

ioLogik E 10/E 1 /E 40/E 4 /E 60/E 6 Series: 5 years

Details See www.moxa.com/warranty

Package Contents

Device 1 x ioLogik E 00 Series remote I/O

Documentation 1 x quick installation guide

1 x warranty card

1. Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

. Because of the limited lifetime of power relays, products that use this component are covered by a -year warranty.

www.moxa.com

imensions

Ordering Information

Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp.

ioLogik E 10 1 x DI, 8 x DO Wet Contact (NPN), Dry

Contact – -10 to 60°C

ioLogik E 10-T 1 x DI, 8 x DO Wet Contact (NPN), Dry

Contact – -40 to 75°C

ioLogik E 1 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP),

Dry Contact – -10 to 60°C

ioLogik E 1 -T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP),

Dry Contact – -40 to 75°C

ioLogik E 14 6 x DI, 6 x Relay Wet Contact (NPN or PNP),

Dry Contact – -10 to 60°C

ioLogik E 14-T 6 x DI, 6 x Relay Wet Contact (NPN or PNP),

Dry Contact – -40 to 75°C

ioLogik E 40 8 x AI, x AO – ±150 mV, ±500 mV, ±5 V, ±10

V, 0- 0 mA, 4- 0 mA -10 to 60°C

ioLogik E 40-T 8 x AI, x AO – ±150 mV, ±500 mV, ±5 V, ±10

V, 0- 0 mA, 4- 0 mA -40 to 75°C

ioLogik E 4 1 x DIO, 4 x AI Wet Contact (NPN or PNP),

Dry Contact

±150 mV, 0-150 mV, ±500

mV, 0-500 mV, ±5 V, 0-5 V,

±10 V, 0-10 V, 0- 0 mA, 4- 0

-10 to 60°C

ioLogik E 4 -T 1 x DIO, 4 x AI Wet Contact (NPN or PNP),

Dry Contact

±150 mV, 0-150 mV, ±500

mV, 0-500 mV, ±5 V, 0-5 V,

±10 V, 0-10 V, 0- 0 mA, 4- 0

-40 to 75°C

ioLogik E 60 4 x DO, 6 x RTD – – -10 to 60°C

ioLogik E 60-T 4 x DO, 6 x RTD – – -40 to 75°C

ioLogik E 6 4 x DO, 8 x TC – – -10 to 60°C

ioLogik E 6 -T 4 x DO, 8 x TC – – -40 to 75°C

Accessories (sold separately)

Software

MX-AOPC UA Server OPC UA Server software for converting fieldbus to the OPC UA standard

www.moxa.com

This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of

Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.

Andere Handbücher für ioLogik E2200 Series

Inhaltsverzeichnis

Andere Moxa Technologies Industrie-PC Handbücher

Moxa Technologies

Moxa Technologies AWK-4252A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681-I-SP-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-300 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies TC-6110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406 Bedienungsanleitung

Moxa Technologies

Moxa Technologies THINKCORE W345 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406-24I Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8112-LX STK Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-300 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-685 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8200 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DRP-C100 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V2616A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA3341 Bedienungsanleitung

Moxa Technologies

Moxa Technologies BXP-C100 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V481-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8100A-ME-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7122 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies CN2510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681C Series Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung

Moxa Technologies ioLogik E2200 Series Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken