Moxa Technologies PTC-101 Series Handbuch

Moxa Industrial Media Converter

PTC-101

Hardware Installation Guide

Second Edition, February 2010

Reproduction without permission is prohibited.

Fl.4, No.135, Lane 235, Pao-Chiao Rd. Shing Tien City, Taipei, Taiwan,

R.O.C.

TEL: +886-2-8919-1230

P/N: 1802001016011

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 2 -

Overview

Moxa Industrial Media Converter, which is specially designed for reliable and

stable operation in harsh industrial environments, provides industrial grade

media conversion between 10/100BaseT(X) and 100BaseFX. PTC-101’s

reliable industrial design is excellent for keeping your industrial automation

applications running continuously, and comes with a relay output warning

alarm to help prevent damages and losses.

This product has a wide operating temperature range, from -40 to 85°C, and is

designed to withstand a high degree of vibration and shock. The rugged

hardware design makes PTC-101 perfect for ensuring that your Ethernet

equipment can withstand critical industrial applications, such as in hazardous

locations, and complies with FCC, UL, and CE standards.

Package Checklist

Moxa Industrial Media Converter is shipped with the following items. If any of

these items is missing or damaged, please contact your customer service

representative for assistance.

yMoxa Industrial Media Converter

yHardware Installation Guide

yMoxa Product Warranty booklet

Features

ySupports 10/100Base-TX auto-negotiation and auto-MDI/MDI-X.

yMulti mode, single mode with SC or, ST, or LC fiber connector available.

ySupports Link Fault Pass-Through.

yPower failure by relay output (LV model only).

yRedundant dual VDC power inputs.

y-40 to 85°C operating temperature range.

yIntegrated high-reliability power supply eliminates the need for external

power transformer.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 3 -

Panel Layout of PTC-101 Series

Top Panel View

Rear Panel View

Front Panel View

(PTC-101-M-ST-LV) Front Panel View

(PTC-101-M-SC-HV)

Rear Panel View

1. Grounding screw

2. Terminal block for power

input

3. Heat dissipation vents

and relay output

4. DIP switch

5. Power input PWR LED

6. Fiber Link/Active LED

7. 100BaseFX Port

(ST/SC/LC connector)

8. 10/100BaseT(X)

9. TP port 10 Mbps LED

10. TP port 100 Mbps LED

11. Model Name

12. DIN-Rail mounting kit

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 4 -

Dimensions (For PTC-101-M-SC-HV.

Others are provided by requests.)

144.15 mm (5.68 in)

67.4 mm (2.65 in)

15 mm

(0.59 in) 19 mm

(0.75 in)

26.2 mm

(1.03 in) 26.06 mm

(1.03 in)

30.5 mm

(1.2 in)

34 mm

(1.34 in)

51.6 mm (2.03 in)

54 mm (2.13 in)

67 mm (2.64 in)

101.4 mm (3.99 in)

111.4 mm (4.39 in)

123.46 mm (4.86 in)

135.1 mm (5.32 in)

66.65 mm (2.62 in)

Front View Rear View Panel Mounting Kit (Optional)

144.15 mm (5.68 in)

12.06 mm (0.47 in)

42.4 mm (1.67 in) 40 mm (1.57 in) 19 mm (0.75 in)

101.4 mm (3.99 in)

111.4 mm (4.39 in)

123.46 mm (4.86 in)

Side View (HV Models) Side View (LV Models)

PTC-101-M-SC-HV

Wiring Requirements

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa Industrial Media Converter.

ATTENTION

Safety First!

Calculate the maximum possible current in each power wire

and common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size.

If the current goes above the maximum ratings, the wiring

could overheat, causing serious damage to your equipment.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 5 -

You should also pay attention to the following points:

yUse separate paths to route wiring for power and devices. If power wiring

and device wiring paths must cross, make sure the wires are perpendicular

at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring in

the same wire conduit. To avoid interference, wires with different signal

characteristics should be routed separately.

yYou can use the type of signal transmitted through a wire to determine

which wires should be kept separate. The rule of thumb is that wiring that

shares similar electrical characteristics can be bundled together.

yKeep input wiring and output wiring separated.

yIt is strongly advised that you label wiring to all devices in the system when

necessary.

Grounding Moxa Industrial Media

Converter

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well-grounded

mounting surface such as a metal panel.

Wiring the Redundant Power Inputs

for PTC-101-LV series

The top five contacts of the 8-contact terminal block connector on the

PTC-101-LV’s top panel are used for the PTC-101-LV’s two DC inputs. Top

and front views of one of the terminal block connectors are shown here.

Top View

Front View

STEP 1: Insert the negative/positive DC wires

into the V-/V+ terminals.

STEP 2: To keep the DC wires from pulling

loose, use a small flat-blade screwdriver to

tighten the wire-clamp screws on the front of

the terminal block connector.

STEP 3: Insert the plastic terminal block

connector prongs into the terminal block

receptor, which is located on the

PTC-101-LV’s top panel.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 6 -

ATTENTION

Before connecting PTC-101-LV to the DC power inputs,

make sure the DC power source voltage is stable.

Communication Connections

PTC-101 models have one 10/100BaseT(X) Ethernet port, and one 100BaseFX

(SC, ST, or LC type connector) fiber port.

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) ports located on PTC-101’s front panel are used to

connect to Ethernet-enabled devices.

Below we show pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports, and also show cable wiring diagrams for

straight-through and cross-over Ethernet cables.

RJ45 (8-pin, MDI) Port Pinouts RJ45 (8-pin, MDI-X) Port Pinouts

Pin Signal

Tx+

Tx-

Rx+

Rx-

Pin Signal

Rx+

Rx-

Tx+

Tx-

RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring

Straight-Through Cable

RJ45 Plug Pin 1

Switch Port

RJ45

Connector RJ45

Connecto

Tx+

Tx-

Rx+

Rx-

NIC Port

Cable Wiring

3 3

6 6

1 1

2 2

Rx+

Rx-

Tx+

Tx-

RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring

Cross-Over Cable

RJ45 Plug Pin 1

Switch Port

(NIC Port)

RJ45

Connector RJ45

Connector

Tx+

Tx-

Rx+

Rx-

(Rx+)

(Rx-)

(Tx+)

(Tx-)

(Tx+)

(Tx-)

(Rx+)

(Rx-)

Switch Port

(NIC Port)

Cable Wiring

3 1

6 2

1 3

2 6

Rx+

Rx-

Tx+

Tx-

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 7 -

100BaseFX Ethernet Port Connection

The concept behind the SC port and cable is quite straightforward. Suppose

you are connecting devices I and II. Contrary to electrical signals, optical

signals do not require a circuit in order to transmit data. Consequently, one of

the optical lines is used to transmit data from device I to device II, and the

other optical line is used transmit data from device II to device I, for

full-duplex transmission.

All you need to remember is to connect the Tx (transmit) port of device I to the

Rx (receive) port of device II, and the Rx (receive) port of device I to the Tx

(transmit) port of device II. If you are making your own cable, we suggest

labeling the two sides of the same line with the same letter (A-to-A and B-to-B,

as shown below, or A1-to-A2 and B1-to-B2).

SC-Port Pinouts SC-Port to SC-Port Cable Wiring

Cable Wiring

A A

B B

ST-Port Pinouts ST-Port to ST-Port Cable Wiring

Cable Wiring

A A

B B

Redundant Power Inputs

For PTC-101-LV series, both power inputs can be connected simultaneously to

live DC power sources. If one power source fails, the other live source acts as a

backup, and automatically supplies all of Moxa Industrial Media Converter’s

power needs.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 8 -

DIP Switch Setting

12345

ON DIP

DIP No. Function ON OFF

1 Auto Negotiation Enable Disable

“ON”: Enables “Auto Negotiation” function, the speed and duplex states for

each port link segment are automatically configured using the highest

performance interoperation mode.

“OFF”: Disables “Auto Negotiation” function, the speed and duplex states

depend on the manual setting configuration.

2 Force TP Speed 100Mbps 10Mbps

(Only when Auto Negotiation is disabled)

“ON”: Forces 100Mbps on Ethernet port.

“OFF”: Forces 10Mbps on Ethernet port.

3 Force TP Duplex Full Duplex Half Duplex

(Only when Auto Negotiation is disabled)

“ON”: Forces Full Duplex on Ethernet port.

“OFF”: Forces Half Duplex on Ethernet port.

4 Link Fault Pass Through Enable Disable

“ON”: Enables “Link Fault Pass Through”, the link status on the TX port will

inform the FX port of the same device and vice versa.

“OFF”: Disables “Link Fault Pass Through”, the link status on the TX port

will not inform the FX port.

5 Operating Mode Store-and-Forward Pass Through

“ON”: Selects “Store-and-Forward” mode, begins to forward a packet to a

destination port after an entire packet is received. The latency depends

on the packet length.

“OFF”: Selects “Pass Through” mode, operates with the minimum latency.

Both transceivers are interconnected via internal MIIs and the

internal switch engine and data buffer are not used.

Note: With “Pass Through” mode enabled, the Ethernet port and fiber port

should transmit at 100 Mbps, which is equivalent to full duplex mode.

Default DIP settings are all at ON position.

ATTENTION

After changing the DIP switch setting, you will need to

power off and then power on the PTC-101 to activate the

new setting.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 9 -

LED Indicators

The front panel of Moxa Industrial Media Converter contains several LED

indicators. The function of each LED is described in the table below.

LED Color State Description

On Power is being supplied to power

input PWR1

PWR1 Green

Off Power is not being supplied to

power input PWR1

On Power is being supplied to power

input PWR2

PWR2 Green

Off Power is not being supplied to

power input PWR2

On Fiber port is active

Blinking Data is being transmitted or

received.

Fiber/Link

/Act Green

Off Fiber is inactive

On Ethernet port 100 Mbps link is

active

Blinking Data is being transmitted at 10

Mbps

10M Yellow

Off Ethernet port 10 Mbps link is

inactive

On Ethernet port 100 Mbps is active

Blinking Data is being transmitted at 100

Mbps

100M Green

Off Ethernet port 100 Mbps link is

inactive

Specifications

Technology

Standards IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X), 100BaseFX

Interface

RJ45 ports 10/100BaseT(X)

Fiber ports 100BaseFX (SC/ST/LC connectors)

LED Indicators PTC-101-HV series: PWR1, Fiber Link, 10/100M

(TP port)

PTC-101-LV series: PWR1, PWR2, Fiber Link,

10/100M (TP port)

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

- 10 -

Dip Switches:

Dip No. Function ON OFF

1 Auto Negotiation Enable Disable

2 Force TP Speed 100 Mbps 10 Mbps

3 Force TP Duplex Full Duplex Half Duplex

4 Link Fault Pass Throuth Enable Disable

5 Operating Mode Store-and-Forward Pass Through

Default DIP settings are all at ON position.

Alarm Contact One relay output with current carrying capacity of

1 A @ 24 VDC

Optical Fiber:

100BaseFX

Multi-mode Single-mode

Wavelength 1300 nm 1310 nm

Max. TX -10 dBm 0 dBm

Min. TX -20 dBm -5 dBm

RX Sensitivity -32 dBm -34 dBm

Link Budget 12 dB 29 dB

Typical Distance 5 kma

4 kmb40 kmc

Saturation -6 dBm -3 dBm

a. 50/125 μm, 800 MHz*km fiber optic cable

b. 62.5/125 μm, 500 MHz*km fiber optic cable

c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable

Power Requirements

Input Voltage:

Power Supply Type Power Consumption Fuse Rating

LV-DC 20 VDC ~ 72 VDC 170mA@20VDC 3.15A(T) 2

HV-AC 85 VAC ~ 264 VAC 73mA@85VAC 3.15A(T) 2

HV-DC 88 VDC ~ 300 VDC 47mA@88VDC 3.15A(T) 2

Connection Removable Terminal Block

Overload Current

Protection 1.6 A (protects against two signals shorted

together)

Reverse Polarity

Protection Present

Physical Characteristics

Housing Aluminum, IP30 protection

Dimensions (W x H x D) 122.5 x 90 x 20 mm (4.82 x 3.54 x 0.79 in)

Weight Product only: 690 g

Packaged: 875 g

Environmental Limits

Operating Temperature -40 to 85oC (-40 to 185oF)

Storage Temperature -40 to 85oC (-40 to 185oF)

Operating Humidity 5 to 90%

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9295-Moxa-PTC-101-M-LC-LV.aspx

Andere Handbücher für PTC-101 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-82 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-80I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1170I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1180I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 351 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CSM-200-1213 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1171I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME61 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1250I Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 451 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101 Series Handbuch

Moxa Technologies

Moxa Technologies Transio TCC-80I Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101 Series Handbuch

Moxa Technologies

Moxa Technologies Media Converter Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort D361 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 364A Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung