MRC DW-6163 Bedienungsanleitung
6000 W x 1 W, PF, ACV, ACA
WATT METER
Model : DW-6163 Your purchase of this
WATT METER marks a
step forward for you
into the field of
precision measurement.
Although this METER is
a complex and delicate
instrument, its durable
structure will allow
many years of use if
proper operating
techniques are
developed. Please read
the following
instructions carefully
and always keep this
manual within easy
reach.
OPERATION MANUAL
3, Hagavish st. Israel 58817 Tel: 972 35595252, Fax: 972 3 5594529
MRC. 5.19
Caution Symbol
Caution :
* Risk of electric shock !
Caution :
* Do not apply the overload
voltage, current to the input
terminal !
* Remove test leads before open
the battery cover !
* Cleaning - Only use the dry
cloth to clean the plastic case !
Environment Conditions
* Installation Categories III-600V.
* Pollution Degree 2.
* Altitude up to 2000 meters.
* Indoor use.
* Relative humidity 80% max.
TABLE OF CONTENTS
1. FEATURES....................................................................... 1
2. SPECIFICATIONS........................................................... 1
2-1 General specifications.............................................. 1
2-2 Electrical specifications................................................ 2
3. FRONT PANEL DESCRIPTION............................................ 4
3-1 Display.......................................................................
.
4
3-2 POWER/Backlight button..............................................4
3-3 FUNCTION button.......................................................
.
4
3-4 HOLD button...............................................................4
3-5 RECORD button ( MAX. / MIN. )................................... 4
3-6 LOAD terminal............................................................ 4
3-7 POWER SOURCE terminal.......................................... 4
3-8 RS-232 output terminal.............................................. 4
3-9 DC 9V Power Adapter input socket...............................
.
4
3-10 Battery Cover / Compartment.................................. 4
3-11 Stand........................................................................4
4. MEASUREING PROCEDURES.............................................. 5
4-1 Power ON/OFF............................................................ 5
4-2 ACV measurement procedure....................................... 5
4-3 ACA measurement procedure....................................... 5
4-4 Watt measurement procedure...................................... 6
4-5 Data Hold...................................................................
.
6
4-6 Data Record ( Max., Min. reading )............................... 6
4-7 Backlight ON/OFF.......................................................7
4-8 Auto power management.............................................7
5. MAINTENANCE............................................................... 8
6. RS232 PC SERIAL INTERFACE............................................8
7. BATTERY REPLACEMENT...................................................10
8.THE ADDRESS OF AFTER SERVICE CENTER.........................10
1. FEATURES
* Professional precision WATT meter with 1 W resolution
digital display , battery operated.
*LSI - circuit provides high reliability and durability.
* Directly operation.
*Measurement:
WATT ( AC ) : 6000W x 1W.
ACV : 600V x 0.1 V .
ACA : 10 A x 10 m A .
PF : 1.00 x 0.01
* True Power and Wide range 0 W to 6000 Watt.
* True RMS measurement of ACV / ACA.
* Super large LCD , Dual display at same time.
* Full function Auto range.
* Memory Record ( Max. , Min. ) , Data Hold.
* RS232 / USB Computer interface.
* Built-in low battery indicator.
* Built - in backlight easy to readout.
* Power : DC 9V ( 006P ) or AC to DC 9V adapter in.
2. SPECIFICATIONS
2-1 General Specifications
Circuit Custom one-chip of microprocessor LSI
circuit.
Display Large LCD display max. reading 9999.
Digit size : 21.8 x 8.5 mm.
Dual value display with backlight
Measurement ACV 0 to 600.0 V
Unit ACA 0.01 to 10.00 A
WATT 0 to 6000 W
PF 0.01 to 1.00
Over input " ---- " mark indication .
Zero
A
utomatic adjustment
Sampling Time Approx. 1 second .
1
Data Hold Freeze the display reading .
Memory Recall Maximum & Minimum value .
Data output RS232 / USB PC Computer interface.
* Connect the optional RS232 cable
UPCB - 02 will get the RS232 plug.
* Connect the optional USB cable
USB - 01 will get the USB plug.
Operation 0 to 50 ( 32 to 122 ).℃℃℉ ℉
Temperature
Operation Less than 80% RH
Humidity
Power Supply Alkaline or Heavy duty type DC 9V battery
006P , MN1604 (PP3) or equivalent.
Power Approx. DC 10 mA
Consumption
Weight 398 g/0.88 LB
Dimension 190 x 88 x 40 mm ( 7.5 x 3.5 x 1.6 inch ).
Accessories Instruction manual....................1 PC
Included Test lead (Red & Black).............1 Pair
Optional AC TO DC 9V adapter
Accessories USB cable , USB - 01
RS232 cable , UPCB - 02
Data Acquisition software, SW-U801-WIN
Excel Data Acquisition software, SW-E802
2-2 Electrical Specifications (23±5 )℃
WATT ( TRUE POWER )
Range Resolution Accuracy
6000 W 1 W ± ( 1%+ 5 W )
* Auto range.
*Measuring Signal come from the front LOAD plug terminals.
*Accuracy is test under input signal is sine wave , 50 / 60 Hz.
*ACV ACA frequency response is from 40 to 400 Hz.
*Max. input value, AC voltage : 600V, AC current : 10 A.
*Accuracy @ 23 ± 5 .℃℃
2
V/A ( TRUE RMS )
Range Resolution Accuracy
ACV 600 V 0.1 V ± ( 0.3 % + 0.3 V )
ACA 10 A 0.01 A ± ( 0.3 % + 0.03 A )
* Auto range.
*ACV, ACA accuracy is test under input signal is sine wave,
50/ 60 Hz.
*ACV ACA frequency response is from 40 to 400 Hz.
*Max. input value, AC voltage : 600V, AC current : 10 A.
*Accuracy @ 23 ± 5℃℃
PF ( Power factor )
Range Resolution Accuracy
1.00 0.01 ± ( 1 %+ 2d)
* ACV, ACA accuracy is test under input signal is sine wave,
50/ 60 Hz
*ACV ACA frequency response is from 40 to 400 Hz.
*Max. input value, AC voltage : 600V, AC current : 10 A.
*Accuracy @ 23 ± 5℃℃
@
Above specification tests under the environment RF Field Stren
g
t
h
less than 3 V/M & frequency less than 30 MHz only.
3
3. FRONT PANEL DESCRIPTION
Fig. 1
3-1 Display
3-2 POWER / Backlight button
3-3 FUNCTION button
3-4 HOLD button
3-5 RECORD button ( MAX. / MIN. )
3-6 LOAD terminal
3-7 POWER SOURCE terminal
3-8 RS-232 output terminal
3-9 DC 9V Power Adapter input socket
3-10 Battery Cover / Compartment
3-11 STAND
4
4. MEASURING PROCEDURE
4-1 Power ON/OFF
1)Press the POWER button ( 3-2, Fig. 1 ) more than 1.5
sec to Turn ON the meter.
2)Press the POWER button ( 3-2, Fig. 1 ) more than 1.5
sec to Turn OFF themeter.
4-2 ACV measurement procedure
1)Press the POWER button ( 3-2, Fig.1 ) more than 1.5
sec to Turn ON the meter.
2)Push the FUNCTION button ( 3-3, Fig. 1 ) once then
change function for measuring ACV.
3)Connect Red test lead to the " V " input terminal and
Black test lead to " COM " input terminal .
4)Then use the test lead measurement unknown AC voltage.
5)Read the up display . The value indicated corresponds
to the position selected. If the Display shows " ---- "
it indicates an Out-of-range measurement.
4-3 ACA measurement procedure
1)Press the POWER button ( 3-2, Fig.1 ) more than 1.5
sec to Turn ON the meter.
2)Push the FUNCTION button ( 3-3, Fig. 1 ) once then
change function for measuring ACA
3)Connect red test lead to the " 10 A " input terminal and
black test lead to "COM" input terminal .
4)Then use the test lead measurement unknown AC current.
5)Read the down display . The value indicated
corresponds to the position selected. If the display
shows "---- " it indicates an Out-of-range measurement.
5
4-4 Watt measurement procedure
1)Press the POWER button ( 3-2, Fig. 1 ) more than 1.5
sec to Turn ON the meter.
2)Make sure your equipment work voltage, such as 110 V
or 220 V.
3)Turn off the POWER SOURCE.
4)Plug in the LOAD ( equipment ) to V terminal and COM
terminal.
5)Plug in the power source to WATT terminal and 10A
terminal.
6)Push the FUNCTION ( 3-3, Fig. 1 ) button once then
change function for measuring ACV / ACA
7)Turn on the POWER SOURCE,
then you can read out the WORK VOLTAGE from the
top of the LCD display value.
8)Turn on the equipment power switch. Let it work,
then you can read out the POWER CONSUMPTION
from the bottom of the LCD display value
9)At the same time. Push the FUNCTION button ( 3-3, Fig.
1 ) once then change function for measuring WATT / PF
10) Now you can take the Active Power value and Power
Factor value from the LCD display .
4-5 Data Hold
During the measurement, press the " Hold Button " ( 3-4,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
4-6 Data Record ( Max., Min. reading )
1)The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-5, Fig.
1 ) once to start the Data Record function and there
will be a " REC. " symbol on the display.
6
2)With the " REC. " symbol on the display :
a)Press the " REC Button " ( 3-5, Fig. 1 ) once, the "
REC. MAX. " symbol along with the maximum value
will appear on the display.
If intend to delete the maximum value, just press
the " Hold Button " ( 3-4, Fig. 1 ) once, then the
display will show the " REC. " symbol only & execute
the memory function continuously.
b)Press the " REC Button " ( 3-5, Fig. 1 ) again, the
" REC. MIN. " symbol along with the minimum value
will appear on the display.
If intend to delete the minimum value, just press
the " Hold Button " ( 3-4, Fig. 1 ) once, then
the display will show the " REC. " symbol only &
execute the memory function continuously.
c)To exit the memory record function, just press the
" REC " button for 2 seconds at least. The display will
revert to the current reading.
4-7 Backlight ON/OFF
1)When use the instrument in a dark place or under the SUN .
You can turn ON the Backlight for easy readout.
2)If the instrument is working. Press the POWER button
( 3-2, Fig. 1 ) once, can turn ON the Backlight.
3)Press the button again will turn OFF the Backlight .
4-8 Auto power management
1)The instrument has built-in "Auto Power Shut-off"
in order to prolong battery life. The meter will switch
off automatically if none of the buttons are pressed
within 10 min.
2)To de-activate this feature, Select the memory record
function during measurement, by pressing the
" Record button " ( 3-5, Fig. 1 ).
7
Inhaltsverzeichnis
Andere MRC Messgerät Handbücher
MRC
MRC RSW-923 Bedienungsanleitung
MRC
MRC Spectro-97 Series Bedienungsanleitung
MRC
MRC PH-230SD Bedienungsanleitung
MRC
MRC PMG-302 Bedienungsanleitung
MRC
MRC PHT-3109 Bedienungsanleitung
MRC
MRC EMF-840 Bedienungsanleitung
MRC
MRC SPECTRO-UV600 Series Bedienungsanleitung
MRC
MRC CD-4303 Bedienungsanleitung
MRC
MRC PAM-9212SD Bedienungsanleitung
MRC
MRC LX-1108 Bedienungsanleitung
MRC
MRC AM-4233SD Bedienungsanleitung
MRC
MRC NIR-CS-3000BT Bedienungsanleitung
MRC
MRC CD-4307SD Bedienungsanleitung
MRC
MRC SPECTRO-96 Bedienungsanleitung
MRC
MRC INE-DDBJ-350F Bedienungsanleitung
MRC
MRC INE-DZB-712 Bedienungsanleitung
MRC
MRC SL-4012 Bedienungsanleitung
MRC
MRC VIS-Series Bedienungsanleitung
MRC
MRC HD-3008 Bedienungsanleitung
MRC
MRC DBD-001N Bedienungsanleitung
