MshOt MZ62 Bedienungsanleitung

Guangzhou Micro-shot Technology Co., Ltd

MZ62

Binocular Stereo Microscope

User Manual

www.m-shot.com

[email protected]

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

MZ62 Binocular stereo microscope

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

Thank you for buying our product!

This instrument is a precision optical instrument. In order to ensure the s

ervice life of the instrument and the correct daily maintenance, you can r

ead this manual carefully before using the instrument.

Warning

1. Before removing the stand, opening the light replacement door, or

removing the light box, please make sure the power is switched off.

2. Do not use or place the instrument in hot, dank or dusty environment for

a long time.

The appropriate working temperature is from 0 to 40℃

The relative humidity shall be 20% to 85% (25℃).

Attention: Do not soak the instrument into water or other liquids.

Attention: Do not put the provided accessories on the main frame or other

transmission part.

Before reading

The manual is compiled based on the whole series, with some extra

accessories and functions included. Please pick the instructions you need.

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

Content MZ62

I. Structure............................................................................................................2

II. Installation diagram.......................................................................................3

III. Operations.....................................................................................................4

1. Using the stage............................................................................................4

2. Fastening and loosing the adjustment..................................................... 4

3. Placing a specimen..................................................................................... 4

4. Adjusting the vision and focus..................................................................4

5. Adjusting the pupil distance..................................................................... 5

6. Installing and removing the reticle.......................................................... 5

7. Using the auxiliary objective.....................................................................5

8. Installing the type C camera tube and digital camera...........................5

9. Focusing the the digital camera................................................................6

IV. Use of the base................................................................................................ 7

1. Each part name.......................................................................................... 7

2. Operating.................................................................................................... 7

V. Main Specifications..........................................................................................8

1. MZ62 Optical Specifications.....................................................................8

2. MZ62 Auxiliary Objective Specifications (Optional).............................8

VI. Troubleshooting..............................................................................................9

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

Before use MZ62

I. Operation

1. Microscope is a precision instrument, which shall be handled carefully to avoid of impact

and collision.

2. The microscope shall not be directly exposed to the sun light. It shall be placed in a dry and

clean environment to avoid high temperature and violent collision. The working environment

requires: room temperature 0 ℃~ 40 ℃, maximum relative humidity 85%.

3. In order to get clear image, keep the lens from being stained or touched.

4. Check if the voltage of power supply fit the rated voltage.

5. It is not allowed to turn the left and right zooming knobs in the opposite direction

simultaneous for errors might occur.

6. When using filming and camera equipment, to ensure the stability, the main body o of the

microscope shall be settled upright with a incline of less than 3°.

7. When using the type C connector for a camera, the chip size should be smaller than 2/3",

and the weight should be lighter than 2.5 kg.

II. Maintenance and service

1. All the lens shall be kept clean. The tiny dusts can be blew away by a blowing balloon or

wipe off by a cotton yarn. The oil stain and finger print, it can be gently wiped away by cotton

yard with some 3:7 ethanol ether mixture.

2. The rest of the microscope, especially the plastic parts, should not be wiped with organic

solvent, and should be cleaned with neutral detergent.

3. Do not dismantle a microscope by yourself so as not to make its performance worse.

Cover the microscope when it’s not in use and prevent it from dust. The microscope shall be

kept in dry places and avoid of being rusted.

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

I. Structure

eyepiece

zoom handwheel

fastening screw

focusing

lens body

frame

holding piece

stage

fastening screw

type C connector

between camera

and camera channel

adjusting part

camera channel

Picture 1

Picture 2

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

II. Installation diagram

The following is the installation diagram and the numbers stand for the installation

sequence.

Before installation, make sure the connection surfaces are clean. When installing,

prevent the surface of each lens from being dirty or scratched.

First connect the type C connector with the camera, and then fix the camera to the camera

channel.

type C camera

type C connector

camera channel

eyepiece

lens body

fastening screw

holding piece

stage

frame

Picture 2

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

III. Operations

1. Using the stage

(1) In most cases, the white side is upward. If the specimen

is white or of other bright colors, you can turn the

black side upward for better contrast.

(2) When removing the stage or changing to the other side,

press the support point of the stage and the opposite

edge will be tilted. (Picture 1)

2. Fastening and loosing the adjustment

(1) Hold one of the hand wheel and turn the other one, the

adjustment can be griped or loosen. (Picture 2)

(2) Appropriately adjust the tightness of the focus

adjustment, so the lens won’t slide down by itself and

the focus will be convenient.

3. Placing a specimen

(1) Put the specimen in the middle of the stage and hold

down if necessary.

(2) Illuminate the specimen with the light source

4. Adjusting the vision and focus

(1)Turn the focus adjusting hand wheel to the maximum

magnification

(2) Turn the vision scale to 0.

(3) Look through the right eyepiece and the adjust the focus

until the image is clear.

(4) Turn the focus adjustment to the minimum

magnification.

(5) Look through the right eyepiece and the rotate the

vision adjusting ring until the image is clear.

(6) Turn the focus adjustment to the maximum again and

look through the right eyepiece. Repeat the step (3), (4)

and (5) if the image is not clear.

(7) Turn the focus adjustment to the minimum and look

Picture 1

Picture 2

Picture 3

Down

Loose

Grip

Left diopter ring Right dipter ring

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

through the left eyepiece. Rotate the adjusting ring on the

left eyepiece until the image is clear. (Picture 3)

5. Adjusting the pupil distance

Hold the left and right eyepiece tubes by hand, push and

pull the left and right eyepiece tubes in the direction shown

by the arrow in Picture 4 until it is comfortable for

binocular observation.

6. Installing and removing the reticle

(1) Rotate the pressing ring off.

(2) Clean the cross divisional bard, fix it in the pressing

ring, with the scaled side upward.

(3) Rotate the pressing ring in the eyepiece tightly.

(4) When removing the cross divisional board, rotate the

pressing ring off from eyepiece and take out the board, and

preserve it with clean paper.

7. Using the auxiliary objective

(1) Rotate the auxiliary objective into the microscope body

through the screw thread downward.

(2) The working distance of the 0.5x auxiliary objective lens

is large, when observing with the 0.5x auxiliary objective

lens, loosen the screw fixing the bracket with a 4mm Allen

wrench, move the bracket up one hole and fix it on the

mobile sliding seat again. (Picture 6)

(3) The above steps are unnecessary when using 0.75x

auxiliary objective.

8. Installing the type C camera tube and digital

camera

(1) Rotate the bottom of the tube to the thread screw M28

until it’tight. (Picture 7)

(2) Loose the screw ②on the tube and take the connector③

out.

(3) Rotate the connector into the camera.

Picture 4

Picture 5

Picture 6

Picture 7

Assistant

objective

MZ62

-stereomicroscope user manual

[email protected] www.m-shot.com

(4) Rotate the camera into the tube with connector together

and tighten the crew ②.

9. Focusing the the digital camera

(1) Turn the focus adjustment to the maximum

magnification until the image on the monitor is clear.

(2) Rotate the focus adjustment to the minimum

magnification and the adjust the focusing ring on the

camera tube ①until the image on the monitor is clear.

(3) Turn the focus adjustment to the maximum

magnification and check if the image is clear. If not, repeat

the step (1) and (2), until the image is clear.

Picture 8

Inhaltsverzeichnis

Andere MshOt Mikroskop Handbücher

MshOt

MshOt TP R200 Leitfaden

MshOt

MshOt ML41 Series Bedienungsanleitung

MshOt

MshOt MF31 Series Bedienungsanleitung

MshOt

MshOt MZX81 Bedienungsanleitung

MshOt

MshOt MI-BGU-LED-TS100 Bedienungsanleitung

MshOt

MshOt MF52-N Bedienungsanleitung

MshOt

MshOt MF-UV-LED Bedienungsanleitung

MshOt

MshOt MF52-N Bedienungsanleitung

MshOt

MshOt MI-BGU-LED-CKX53 Bedienungsanleitung

MshOt

MshOt MF53-N Bedienungsanleitung

MshOt

MshOt MF43-N Bedienungsanleitung

MshOt

MshOt MI-BGU-LED IX50 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung