Leica DI C800 Handbuch
Medical division
LeicaDI C800
User Manual / Installation Instructions
10 743 250 – Version 00
II Leica DI C800 / Ref. 10 743 250 /Version 00
Thank you for purchasing a Leica DI C800.
In developing our systems, we have placed great emphasis on simple, self-explanatory
operation. Nevertheless, we suggest studying this manual so that you know and are able
to utilize all the benefits of your Leica DI C800 in an optimum way.
For valuable information about Leica Microsystems products and services and the
address of your nearest Leica representative, please visit our website:
www.leica-microsystems.com
Thank you for choosing our products. We hope that you will enjoy the quality and
performance of your Leica Microsystems Leica DI C800.
Leica Microsystems (Schweiz) AG
Medical Division
CH-9435 Heerbrugg
Leica DI C800 / Ref. 10 743 250 /Version 00
Chapter overview
1
Chapter overview
Introduction 3
Assembly 5
Installation 7
Operation 9
Safety Notes 11
Messages and Warnings 12
Specifications 13
Contents
2Leica DI C800 / Ref. 10 743 250 /Version 00
Contents
Introduction 3
These Instructions 3
Product identification 3
Symbols in this manual 3
Design and function 4
Connection points on the Leica DI C800 4
Overview of the typical load for the Leica DI C800 4
Assembly 5
Assembling the Leica DI C800 5
Connecting the Leica DI C800 6
Installation 7
Activating the Leica DI C800 7
Setting up the Leica DI C800 7
Checking the installation 8
Operation 9
"User Settings" menu 9
During the surgery 10
Safety Notes 11
Designated use 11
Non-intended use 11
Information for the person responsible for the instrument 11
Directions for the user of the instrument 11
Dangers during use 11
Messages and Warnings 12
Troubleshooting the mirrored data 12
Troubleshooting the display 12
Troubleshooting the optical system 12
Specifications 13
Electrical data 13
Physical data 13
Ambient conditions 13
Standards 13
Accessories 13
Compatibility 13
Leica DI C800 / Ref. 10 743 250 /Version 00
Introduction
3
These Instructions
This User Manual / Installation Manual contains important safety
notes as well as information on using the instrument (see the
chapter "Safety notes").
Before attempting to set up the product, carefully read through
the User Manual / Installation Manual.
Product identification
The model and serial number of your product are shown on the identification label.
Copy this information to the line below so that it is handy in case you have
questions for our representatives or service locations.
Type: Serial No.:
Symbols in this manual
The symbols used in this manual have the following meaning:
Warning
Indicates a potentially hazardous situation or improper use that could
result in serious personal injuries or death.
Caution
Indicates a potentially hazardous situation or improper use which, if
not avoided, may result in minor or moderate injury and/or
appreciable material, financial or environmental damage.
Information about use that helps the user to employ the product in a
technically correct and efficient way.
➩Action required; here, you are requested to take action.
Introduction
Introduction
4Leica DI C800 / Ref. 10 743 250 /Version 00
Design and function
Design of the Leica DI C800
1 Eyepieces
2 Interpupillary distance display
3 Setting wheel for setting the interpupillary distance
Accessories provided
•XGA video cable (for connecting the Leica DI C800 to the workstation or to a PC)
•Leica DI C800 User Manual / Installation Manual (10 743 250)
Function of the Leica DI C800
The Leica DI C800 (Digital Imaging Color Module) is a binocular tube with an
integrated module for superimposing data.
A built-in color display can superimpose data or video images.
Connection points on the LeicaDI C800
5 Video cable terminal
6 CAN cable
Overview of the typical load for the
LeicaDI C800
A Stereo binocular tube at the side optical output
B Video adapter (documentation accessories) at the document output
C Leica DI C800
Leica DI C800 / Ref. 10 743 250 /Version 00
Assembly
5
Assembling the LeicaDI C800
➩Release the clamping screw at the dovetail ring of the 0° assistant attachment
(at the beam splitter or at the second observer attachment) and remove the
protective cover.
➩Carefully insert the Leica DI C800 and fasten the clamping screw in place.
Pay attention to the maximum load of the Leica surgical microscope
during assembly of the Leica DI C800, see the microscope's User Manual.
Assembly
Assembly
6Leica DI C800 / Ref. 10 743 250 /Version 00
Connecting the LeicaDI C800
1 Socket for a CAN connecting cable on the optics carrier
2 CAN connecting cable
3 XGA video cable (for a PC or workstation) (marked in blue)
Look out for pinching of the CAN connecting cable (2) that may occur when laying the cable.
Leica DI C800 / Ref. 10 743 250 /Version 00
Installation
7
Activating the LeicaDI C800
Registering the Leica DI C800 at the control unit
➩Select the "Setup" entry in the "Service" menu.
➩Switch to the "Device List" tab.
➩Select DI C800 and press the "Toggle" button.
DI C800 "present" is displayed in green.
The Leica DI C800 is registered at the control unit.
➩Leave the menu using "Back".
Setting up the LeicaDI C800
Set the minimum and maximum for brightness on the Leica DI C800
➩Select the "Setup" entry in the "Service" menu.
➩Switch to the "DIC800" tab.
➩Set the brightness with the "+" or "–" button.
Or
➩Click the brightness adjustment bar directly.
Briefly clicking the "+" or "–" button changes the brightness value in
increments of 1. If the button is held down, the value changes in
increments of 5.
Installation
8 Leica DI C800 / Ref. 10 743 250 /Version 00
Installation
Checking the installation
Functional test
➩Select the "Diagnostic" entry in the "Service" menu.
➩Switch to the "DI C800" tab.
The following options for functional testing are provided:
•Image on / Image off Manually switch on/off the display containing
overlaid data
•Testimage Superimpose a test image in the eyepiece of the
Leica DI C800
•Video signal is (in)correct Shows the status of the video signal
Inhaltsverzeichnis
Andere Leica Mikroskop Handbücher
Leica
Leica EZ4 E Bedienungsanleitung
Leica
Leica FL800 ULT Bedienungsanleitung
Leica
Leica Emspira 3 Bedienungsanleitung
Leica
Leica MS5 Bedienungsanleitung
Leica
Leica StereoZoom 7 Bedienungsanleitung
Leica
Leica ARveo Bedienungsanleitung
Leica
Leica DM750 M Bedienungsanleitung
Leica
Leica DM LSP Bedienungsanleitung
Leica
Leica TCS SP5 X Bedienungsanleitung
Leica
Leica DMS300 Bedienungsanleitung
Leica
Leica DM IRB Bedienungsanleitung
Leica
Leica DM6000 M Bedienungsanleitung
Leica
Leica DM2000 Bedienungsanleitung
Leica
Leica A60 F Bedienungsanleitung
Leica
Leica S Series Bedienungsanleitung
Leica
Leica DM IRM Bedienungsanleitung
Leica
Leica A60 S Bedienungsanleitung
Leica
Leica DM2000 Bedienungsanleitung
Leica
Leica M80 B Bedienungsanleitung
Leica
Leica Z6 APO Bedienungsanleitung
Beliebte Mikroskop Handbücher anderer Marken
Thermo Scientific
Thermo Scientific Nicolet iN10 Leitfaden
National
National DC3-163 Bedienungsanleitung
KERN Optics
KERN Optics OPE-1 Bedienungsanleitung
OPTIKA MICROSCOPES
OPTIKA MICROSCOPES B-150D Bedienungsanleitung
Prior
Prior Lux POL Bedienungsanleitung
Opitec
Opitec Smartscoop 115615 Bedienungsanleitung
Nikon
Nikon ECLIPSE E200 POL Bedienungsanleitung
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Bedienungsanleitung
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Bedienungsanleitung
Olympus
Olympus SZ61 Bedienungsanleitung
AO
AO Cycloptic Bedienungsanleitung
Celestron
Celestron 44345 Bedienungsanleitung