MuxLab 500115 Bedienungsanleitung

94-000870-A

SE-000870-A

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: videoease@muxlab.com URL: www.muxlab.com

Specifications

Environment

PoE CCTV IP

Devices

PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to 30

Watts.

Transmission

Transparent to the user

Standard supported

Ethernet side:

IEEE 802.3 10BaseT,

IEEE 802.3U 100Base-TX

IEEE 802.3af/at compatible PoE

PoE Power

Class 3

Connectors

One (1) BNC 75 Ohms.

One (1) RJ45Sfor Cat 5e/6 unshielded or shielded twisted pair.

LED Indicators

Power, IP Traffic, 100MBps

Maximum Distance

RG6: Up to 1969ft (600m) @ 100Mbps (with PoE)

Up to 3281ft (1000m) with IP only (without PoE)

UTP Cat 5e/6: Up to 330ft (100 m)

Note:When installed in an electrically noisy environment, an STP

cable must be used. Also, cross-connection reduces the effective

distance depending on the grade of twisted cable used.

RJ45 Pin

Configuration

Reverse Polarity

Sensitive. Use EIA/TIA

568A or 586B straight-

through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Cable

UTP/STP: One (1) Cat 5e/6 or better twisted pair cables required

RG59/RG6:75 Ohms (avoid CCS cable)

Power Supply

Optional Power Supply (110-240V/56VDC) min.65W (sold separately).

Required at the Camera Side Device when coax cable quality or

length results in insufficient power reaching the camera. Required

at the Network Side Device when used in a non-PoE environment.

Power Consumption

Network Side: 3.2 Watt Camera Side: 3.0 Watt

Temperature

Operating: 0° to 60°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure

Metal

Dimensions

3.54/3.11” x 1.65” x 0.87” (90/79 x 42 x 22 mm)

Weight

0.78 lb (0.354 kg)

Compliance

Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty

2 years

Order Information

500115CCTV IP PoE Extender Kit, 600m

Accessories

500116-(US/UK/EU) 56VDC 65W PSU (sold separately)

LongReach CCTV IP PoE

Extender Kit, 600m

500115

Quick Installation Guide

Overview

The LongReach CCTV IP PoE Extender Kit, 600m (500115) allows one IP camera (up

to 30 Watts) to be connected up to 1969ft (600m) via a single 75-ohm coax cable in a

point-to-point configuration. The maximum distance depends on the grade and quality

of coaxial cable used, and if PoE is used. An optional 56VDC (65W) Power Supply

(sold separately) can be used if required, which also helps to extend distance.

Applications

CCTV IP surveillance

Installation

1. Identify the connectors on the Extenders as indicated on the product labels.

2. Position each unit in the intended installation location.

3. Verify that the distance between the CCTV IP PoE extenders is within MuxLab

specifications (see Specifications table).

4. To install the Network Side Device:

4a. Connect the extender to the PoE Ethernet Switch with a UTP Cable.

Note: If the Ethernet Switch is not PoE; you will need to connect an optional

56VDC (65W) Power Supply (sold separately) to the Network Side Device.

4b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX

LINK connector on the Extender.

5. To install the Camera Side Device:

5a. Connect the extender to the camera with a Cat5e/6 cable.

Note: If the quality or length of the coaxial cable reduces the power to a level

that is insufficient to power the camera, you will need to connect a separate

48-56VDC (with appropriate wattage, depending on camera) Power Supply to

the Camera Side Device.

5b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX

LINK connector on the Extender.

6. Power on the equipment and verify the image quality. The following is a diagram

of a typical configuration.

Tables

Typical resistance for RG59 is 17Ω/100m, RG6 is 13Ω/100m and RG11 is 4.9Ω/100m

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions

in respect to the installation of the LongReach CCTV IP PoE Extender Kit, 600m:

Symptom

Network Side

LEDs

Camera Side

LEDs

Probable Cause

Possible

Solutions

Power

IP Traffic

Power

IP Traffic

No Image

OFF

No power

•Check if the Ethernet

switch is PoE.

•Check the power

connection.

No Image

OFF

Coaxial Cable

•Check the coaxial

cable.

No Image

OFF

Distance

•Check the coaxial

cable length and

quality.

No Image

OFF

UTP Cable

•Check the UTP Cable

pin out.

No Image

No Traffic

•Check network

configuration.

Choppy Image

BLINK

Distance

•Check cable length

•Check the coaxial

cable quality.

If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at

877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).

Inhaltsverzeichnis

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500390 Bedienungsanleitung

MuxLab

MuxLab VideoEase 500090 Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500041-WP-UK Bedienungsanleitung

MuxLab

MuxLab 500465 Bedienungsanleitung

MuxLab

MuxLab 500759-TX-HLO Bedienungsanleitung

MuxLab

MuxLab 500460-RX Bedienungsanleitung

MuxLab

MuxLab 500458-ARC Bedienungsanleitung

MuxLab

MuxLab 500449 Bedienungsanleitung

MuxLab

MuxLab 500800 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab 500760-KVM Bedienungsanleitung

MuxLab

MuxLab 500456 Bedienungsanleitung

MuxLab

MuxLab VideoEase Bedienungsanleitung

MuxLab

MuxLab 500758 Bedienungsanleitung

MuxLab

MuxLab 500768 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500759-TX Bedienungsanleitung

MuxLab

MuxLab 500757 Bedienungsanleitung

MuxLab

MuxLab 500451 Bedienungsanleitung

MuxLab

MuxLab 500462 Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab 500112 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung