MuxLab 500112 Bedienungsanleitung

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: [email protected] URL: www.muxlab.com

Specifications

Environment PoE CCTV IP

Devices PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to

15.4 Watts.

Transmission Transparent to the user

Standard supported Ethernet side:

IEEE 802.3 10BaseT,

IEEE 802.3U 100Base-TX

IEEE 802.3af compatible PoE

PoE Power Class 3

Connectors One (1) BNC 75 Ohms.

One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.

LED Indicators Power, IP Traffic, 100MBps

Maximum Distance RG59/RG6: Up to 980 ft (300m) @ 100Mbps

UTP Cat 5e/6: Up to 330 ft (100 m)

Note: When installed in an electrically noisy environment, an STP cable

must be used. Also, cross-connection reduces the effective distance

depending on the grade of twisted cable used.

RJ45 Pin Configuration

Reverse Polarity

Sensitive. Use EIA/TIA

568A or 586B straight-

through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Cable UTP/STP: One (1) Cat 5e/6 or better twisted pair cables required

RG59/RG6: 75 Ohms (avoid CCS cable)

PoE Power Supply

(500113)

Optional PoE Power Supply (110-240V/48VDC/.625A, 2.1mm plug)

with inter-changeable blades (sold separately). Required at the Camera

Side Device when coax cable quality or length results in insufficient

power reaching the camera. Required at the Network Side Device

when used with non-PoE LAN switch.

Power Consumption Network Side: 1.82 Watt Camera Side: 1.73 Watt

Temperature Operating: 0° to 40°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure Metal

Accessories Wall-mount brackets included

Dimensions 4.37” x 2.95” x 0.99” (110 x 75 x 25 mm)

Weight 1.5 lb (0.68 kg)

Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty 2 years

Order Information 500112 LongReach CCTV IP PoE Extender Kit

500113 Power Supply for 500112 (48VDC)

LongReach CCTV IP PoE Extender Kit

500112

Quick Installation Guide

Overview

The LongReach CCTV IP PoE Extender Kit (500112) allows one IP camera (15.4

Watts) to be connected up to 980 ft (300 m) via a single 75-ohm coax cable in a point-

to-point configuration. The maximum distance depends on the grade and quality of

coaxial cable. An optional PoE 48VDC Power Supply (500113) is available if required.

Applications

CCTV IP surveillance

Installation

1. Identify the connectors on the Extenders as indicated on the product labels.

2. Attach the surface-mount brackets if required as shown below.

3. Verify that the distance between the CCTV IP PoE extenders is within MuxLab

specifications (see Specifications table).

4. To install the Network Side Device:

3a. Connect the extender to the PoE Ethernet Switch with a UTP Cable.

Note: If the Ethernet Switch is not PoE; you will need to connect a PoE Power

Supply (500113) to the Network Side Device.

3b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX

LINK connector on the Extender.

5. To install the Camera Side Device:

4a. Connect the extender to the camera with a Cat5e/6 cable.

Note: If the quality or length of the coaxial cable reduces the power to a level that

is insuffiicent to power the camera, you will need to connect a PoE Power Supply

(500113) to the Camera Side device.

4b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX

LINK connector on the Extender.

6. Power on the equipment and verify the image quality. The following is a diagram

of a typical configuration.

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions

in respect to the installation of the CCTV IP PoE Coax Extender Kit:

Network Side

LEDs

Camera Side

LEDs Probable Cause Possible

Solutions

Symptom

Power IP Traffic Power IP Traffic

No Image OFF OFF OFF OFF No power • Check if the Ethernet

switch is PoE.

• Check the power

connection.

No Image ON OFF OFF OFF Coaxial Cable • Check the coaxial

cables.

No Image ON OFF OFF OFF Distance • Check the coaxial

cables length and

quality.

No Image ON OFF ON OFF UTP Cable • Check the UTP Cable

pin out.

No Image ON ON ON ON No Traffic • Check network

configuration.

Choppy Image ON BLINK ON BLINK Distance • Check cable length

• Check the coaxial

cable quality.

If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at

877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).

Inhaltsverzeichnis

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500464 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500759-TX-Dante Bedienungsanleitung

MuxLab

MuxLab 500759-TX-HLO Bedienungsanleitung

MuxLab

MuxLab ProDigital 500485 Bedienungsanleitung

MuxLab

MuxLab 500733 Bedienungsanleitung

MuxLab

MuxLab 500390 Bedienungsanleitung

MuxLab

MuxLab 500041-WP-US Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500457 Bedienungsanleitung

MuxLab

MuxLab 500112 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500759-TX Bedienungsanleitung

MuxLab

MuxLab 500140 Bedienungsanleitung

MuxLab

MuxLab 500454-POE Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab 500070 Bedienungsanleitung

MuxLab

MuxLab 500772 Bedienungsanleitung

MuxLab

MuxLab 500450-LR Bedienungsanleitung

MuxLab

MuxLab 100504 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500753 Bedienungsanleitung

MuxLab

MuxLab 500454 Bedienungsanleitung

MuxLab

MuxLab 500759 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung