MuxLab 500732 Bedienungsanleitung

94-000764-B

SE-000764-B

6G-SDI EXTENDER OVER FIBER

500732

500732-SM10

500732-SM40

500732-SM80

Installation & Operation Manual

Page 2

Printed in Canada. No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise without prior written permission of the author.

Trademarks:

MuxLab Broadcast is a registered trademark of MuxLab Inc.

Page 3

Table of Contents

1. Overview.........................................................................4

1.1. Description..............................................................4

1.2. Features...................................................................6

2. Technical Specifications ................................................7

3. Installation Procedure...................................................9

3.1. Parts List .................................................................9

3.2. Product Overview .................................................10

3.3. Physical Installation..............................................12

3.4. Installation & Power-up Procedure.......................14

3.5. Supported SDI Modes...........................................15

3.6. Supported Video Modes........................................16

3.7. SDI Input Connections..........................................17

3.8. SDI Output Connections.......................................17

4. Firmware Upgrade Procedure....................................18

4.1. Firmware Upgrade Procedure ...............................18

4.2. USB Driver Setup .................................................21

5. Unit Control and Status...............................................24

6. Troubleshooting ...........................................................25

7. Appendix.......................................................................27

A. ASCII Command Set.............................................27

8. Product Warranty Policy............................................30

Page 4

Overview

1.1.

Description

The 6G-SDI Extender is a unique new solution from MuxLab for

extending SDI based cameras* or other SDI sources* up to 4K @

30Hz resolution with the added benefit of extending the High

Resolution signal up to 985ft (300m) via OM3 multimode fiber

(model 500732), up to 1300ft (400m) via OM4 multimode fiber

(model 500732), up to 33,000ft (10km) via singlemode fiber

(model 500732-SM10), up to 132,000ft (40km) via singlemode

fiber (model 500732-SM40), and up to 264,000ft (80km) via

singlemode fiber (model 500732-SM80).

The input source for the 6G-SDI Extender over FIBER is either

HD-SDI using four coax cables, 3G-SDI using two coax cables, or

6G-SDI using a single coax cable.

Page 5

Figure 1 System Connectivity Overview

Typical Applications:

Video (cinema) production

Studio broadcasting production

Studio to Studio

Mobile video (broadcasting vehicle)

News coverage and live events

Post production

Page 6

1.2.

Features

Up to 1300ft (400m) via multimode OM4 fiber and

up to 264,000ft (80km) via singlemode fiber.

HD-SDI using single, two or four coax cables, 3G-

SDI using single or two coax cables, 6G-SDI using

a single coax cable, with HDMI 3D support.

Maximum resolution supported: 4096x2160 @

24/25Hz, 3840x2160 @ 30Hz

Supported SMPTE Standards:

SMPTE-292M, SMPTE-296M, SMPTE-372M,

SMPTE-424M, SMPTE-425M

Supports all 6G channel configurations (1/2/4).

Automatic SDI Link recognition and configuration.

USB interface for field upgradable firmware and

diagnostics.

Standard 10G SFP+ module.

Multiple ¼”-20 threads for Camera mounting or

equipment attachment.

Page 7

Technical Specifications

Specifications

Environment

6G-SDI Digital Signal Transmission

Enclosures

Measurements

Tx: 110mm (4.3”) x 110mm (4.3”) x 32mm (1.25”)

Rx: 110mm (4.3”) x 110mm (4.3”) x 32mm (1.25”)

Color

Black Electrophoresis (Tx Unit)

Control

Serial Console Emulation with USB Interface

Distance

Model 500732: Up to 985ft (300m) via OM3

multimode fiber and 1300ft (400m) via OM4

multimode fiber.

Model 500732-SM10: Up to 33,000ft (10km) via

singlemode fiber.

Model 500732-SM40: Up to 132,000ft (40km) via

singlemode fiber. Requires a 5dB attenuator for

distances less than 33,000ft (10km).

Model 500732-SM80: Up to 264,000ft (80km) via

singlemode fiber. Requires a 10dB attenuator for

distances less than 115,500ft (35km).

Compliance

FCC, CE, RoHS

Power

12VDC, 1.25Amp

External Power Supply with US, UK & Euro blades

Table 1 Specifications

Page 8

Transmitter Connectivity

Front Side

4x BNC SDI Input Connectors (0.8V pp, 75Ohms)

1x BNC Sync Output Connector

Rear Side

1x SFP+ module Connector

1x terminal block for RS232 interface

Top Side

Mini USB for firmware updates (plus control & status)

Table 2 Transmitter Connectivity

Receiver Connectivity

Front Side

4x BNC SDI Output Connectors (0.8V pp, 75Ohms)

1x BNC Sync Input Connector

Rear Side

1x SFP+ module Connector

1x terminal block for RS232 interface

Top Side

Mini USB for firmware updates (plus control & status)

Table 3 Receiver Connectivity

Page 9

Installation Procedure

3.1.

Parts List

The 6G-SDI Extender over FIBER Kit (500732,

500732-SM10, 500732-SM40 & 500732-SM80) come

with the following parts:

1x Transmitter Unit (Tx)

1x Receiver Unit (Rx)

2x 12VDC Wall-mount Power Supply

US, UK & Euro Blades for the Wall-mount Power

Supply

10G SFP+ modules with LC connectors

Page 10

3.2.

Product Overview

3.2.1.

Transmitter

The external connections and light indicators of the

transmitter unit are detailed in Figure 2. Please

familiarize yourself with them before installing the unit.

6G/3G/HD-SDI Input

Compatible

LED Indicator

When SDI Link

is established

Power

LED Indicator

Mini-USB Port

Firmware Upgrade

& Unit Control

Flashing LED

Indicator

When

information

Is passing

through the link

Sync

Output

SFP+ module

3G/HD-SDI Input

Compatible

HD-SDI Input

Compatible

Figure 2 Front View of Transmitter

POWER

connector

SERIAL port

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500502 Bedienungsanleitung

MuxLab

MuxLab 500760-KVM Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500450-LR Bedienungsanleitung

MuxLab

MuxLab VideoEase MonoPro XLR Benutzerhandbuch

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab Broadcast 500734 Bedienungsanleitung

MuxLab

MuxLab 500757 Bedienungsanleitung

MuxLab

MuxLab DomoStream Bedienungsanleitung

MuxLab

MuxLab 100504 Bedienungsanleitung

MuxLab

MuxLab 500451-TX Bedienungsanleitung

MuxLab

MuxLab 500710 Bedienungsanleitung

MuxLab

MuxLab 500454 Bedienungsanleitung

MuxLab

MuxLab 500459-100 Bedienungsanleitung

MuxLab

MuxLab 500757 Bedienungsanleitung

MuxLab

MuxLab Pro Digital 500452 Bedienungsanleitung

MuxLab

MuxLab 500401-WP-UK Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500768 Bedienungsanleitung

MuxLab

MuxLab 100509 Bedienungsanleitung

MuxLab

MuxLab 500450 Bedienungsanleitung

MuxLab

MuxLab 500850 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung