National Instruments NI 5751 Bedienungsanleitung

GETTING STARTED GUIDE

NI 5751/5751B

50 MS/s Digitizer Adapter Module

Note Before you begin, complete the software and hardware installation

instructions in your FlexRIO FPGA getting started guide or controller for FlexRIO

getting started guide.

Caution Using the NI 5751/5751B in a manner not described in this document

may impair the protection the NI 5751/5751B provides.

The NI 5751/5751B is a 50 MS/s, 14-bit high-speed digitizer adapter module designed to work

in conjunction with FlexRIO FPGA modules and controllers for FlexRIO. The NI 5751/5751B

features 16 analog input channels and 8 bidirectional digital I/O channels.

This document explains how to install and configure the NI 5751/5751B.

The NI 5751B variant is compatible with all FlexRIO FPGA modules and controllers for

FlexRIO. The NI 5751 variant is compatible with the NI PXI-795xR and NI PXIe-796xR

FPGA modules only.

Note NI 5751R refers to the combination of your NI 5751/5751B adapter module

and either a FlexRIO FPGA module or a controller for FlexRIO. NI 5751/5751B

refers to your adapter module only.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for

electromagnetic compatibility (EMC) stated in the product specifications. These requirements

and limits are designed to provide reasonable protection against harmful interference when the

product is operated in the intended operational electromagnetic environment.

This product is intended for use in industrial locations. However, harmful interference may

occur in some installations, when the product is connected to a peripheral device or test object,

or if the product is used in residential or commercial areas. To minimize interference with

radio and television reception and prevent unacceptable performance degradation, install and

use this product in strict accordance with the instructions in the product documentation.

Furthermore, any modifications to the product not expressly approved by National Instruments

could void your authority to operate it under your local regulatory rules.

Caution To ensure the specified EMC performance, operate this product only with

shielded cables and accessories.

Caution To ensure the specified EMC performance, you must install PXI EMC

Filler Panels, National Instruments part number 778700-01, in all open chassis slots.

You can order a kit of six single slot EMC Filler Panels directly from NI by visiting

ni.com.

Caution To ensure the specified EMC performance, the length of all I/O cables

must be no longer than 30 m (100 ft).

FlexRIO Documentation

Table 1. FlexRIO Documentation Locations and Descriptions

Document Location Description

Getting started guide

for your FlexRIO

FPGA module or

controller for FlexRIO

Available from the Start menu

and at ni.com/manuals.

Contains installation instructions

for your FlexRIO system.

Specifications

document for your

FlexRIO FPGA

module or controller

for FlexRIO

Available from the Start menu

and at ni.com/manuals.

Contains specifications for your

FlexRIO FPGA module or

controller for FlexRIO.

Getting started guide

for your adapter

module

Available from the Start menu

and at ni.com/manuals.

Contains signal information,

examples, and CLIP details for

your adapter module.

Specifications

document for your

adapter module

Available from the Start menu

and at ni.com/manuals.

Contains specifications for your

adapter module.

LabVIEW FPGA

Module Help

Embedded in LabVIEW Help

and at ni.com/manuals.

Contains information about the

basic functionality of the

LabVIEW FPGA Module.

Real-Time Module

Help

Embedded in LabVIEW Help

and at ni.com/manuals.

Contains information about real-

time programming concepts, step-

by-step instructions for using

LabVIEW with the Real-Time

Module, reference information

about Real-Time Module VIs and

functions, and information about

LabVIEW features on real-time

operating systems.

2| ni.com | NI 5751/5751B Getting Started Guide

Table 1. FlexRIO Documentation Locations and Descriptions (Continued)

Document Location Description

FlexRIO Help Available from the Start menu

and at ni.com/manuals.

Contains information about the

FPGA module front panel

connectors and I/O, controller for

FlexRIO front panel connectors

and I/O, programming

instructions, and adapter module

component-level IP (CLIP).

FlexRIO Adapter

Module Development

Kit User Manual

Available from the Start menu

at Start»All Programs»

National Instruments»NI

FlexRIO»NI FlexRIO

Adapter Module Development

Kit»Documentation.

Contains information about how

to create custom adapter modules

for use with FlexRIO FPGA

modules.

LabVIEW Examples Available in NI Example

Finder. In LabVIEW, click

Help»Find Examples»

Hardware Input and Output»

FlexRIO.

Contains examples of how to run

FPGA VIs and Host VIs on your

device.

IPNet Located at ni.com/ipnet. Contains LabVIEW FPGA

functions and intellectual property

to share.

FlexRIO product page Located at ni.com/flexrio. Contains product information and

data sheets for FlexRIO devices.

Verifying the System Requirements

To use the NI 5751/5751B, your system must meet certain requirements. For more information

about minimum system requirements, recommended system, and supported application

development environments (ADEs), refer to the readme, which is available on the software

media or online at ni.com/updates.

Compatibility with FPGA Modules and

Controllers for FlexRIO

The NI 5751B variant is compatible with all FlexRIO FPGA modules and controllers for

FlexRIO; however, the NI 5751 variant is only compatible with NI PXI-795xR and

NI 5751/5751B Getting Started Guide | © National Instruments | 3

NI PXIe-796xR modules. The following table lists each adapter module's compatibility with

FlexRIO FPGA modules and controllers for FlexRIO.

Table 2. Adapter Module Compatibility

NI PXI-795xR NI PXIe-796xR NI PXIe-797xR NI-793xR

NI 5751 Yes Yes No No

NI 5751B Yes Yes Yes Yes

Accessories

NI SMB-2147/2148 devices are shielded signal accessories for NI 5751/5751B adapter

modules. NI SMB-2147/2148 accessories provide easy connections to other devices for testing

and debugging. For more information about these accessories, refer to the

NI SMB-2145/2146/2147/2148 User Guide. The following figure shows a typical setup of the

NI 5751/5751B with the NI SMB-2147 and NI SMB-2148 signal accessories.

4| ni.com | NI 5751/5751B Getting Started Guide

Figure 1. NI 5751/5751B with NI SMB-2147 and NI SMB-2148 Signal Accessories

NI PXI-1042

SMB-2147

Analog Input Accessory AI 3

AI 7

AI 2

AI 6 AI 5

AI 1 AI 0

AI 4

AI 11

AI 15 AI 14

AI 10

AI 13

AI 9

AI 12

AI 8

1. PXI Chassis with FlexRIO FPGA and adapter

module

2. NI SMB-2147

3. NI SMB-2148

4. SHC68-C68-D4 Cable Assemblies

Unpacking

Caution To prevent ESD from damaging the devices, ground yourself using a

grounding strap or by holding a grounded object, such as your computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove each module from the package and inspect it for loose components or any other

sign of damage.

Caution Never touch the exposed pins of connectors.

Note Do not install a device if it appears damaged in any way.

NI 5751/5751B Getting Started Guide | © National Instruments | 5

3. Unpack any other items and documentation from the kit.

Store the devices in the antistatic package when they are not in use.

Preparing the Environment

Ensure that the environment you are using the NI 5751/5751B in meets the following

specifications.

Operating temperature (IEC 60068-2-1,

IEC 60068-2-2)

0 °C to 55 °C

Operating humidity (IEC 60068-2-56) 10% to 90% RH, noncondensing

Pollution Degree 2

Maximum altitude 2,000 m at 25 °C ambient temperature

Indoor use only.

Note Refer to the NI 5751/5751B Specifications at ni.com/manuals for complete

specifications.

Caution Clean the hardware with a soft, nonmetallic brush. Make sure that the

hardware is completely dry and free from contaminants before returning it to

service.

Confirming that Measurement & Automation

Explorer (MAX) Recognizes the Device

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX

informs other programs about which devices reside in the system and how they are configured.

MAX is automatically installed with FlexRIO Support.

1. Launch MAX by navigating to Start»All Programs»National Instruments»NI MAX or

by clicking the NI MAX desktop icon.

2. In the Configuration pane, double-click Devices and Interfaces to see the list of installed

devices. Installed devices appear under the name of their associated chassis.

3. (PXI and PXI Express devices only) Expand your Chassis tree item. MAX lists all

devices installed in the chassis. Your default device names may vary.

Note If you do not see your hardware listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure

the device is correctly installed, and restart.

4. (Controllers for FlexRIO only) Your device appears under the Remote Devices section.

6| ni.com | NI 5751/5751B Getting Started Guide

Installing the NI 5751/5751B

Refer to the getting started guide for your FlexRIO FPGA module or Controller for FlexRIO

for instructions about how to install your FlexRIO system, including the NI 5751/5751B.

Cables

NI recommends using the SHC68-C68-D4 cable (part number 196275A-01) with the

NI 5751/5751B. This cable connects directly to the analog and digital connectors on the

NI 5751/5751B.

Front Panel and Connector Pinouts

The following figure shows the front panel connectors for the NI 5751/5751B.

Device Front Panel Connector Description

NI 5751

AI 0-15

CLK

DI 0-7

DO 0-7

DI 0-7/DO-07 Digital input terminals (DI 0-7) and digital output

terminals (DO 0-7)

CLK IN Sample Clock input

AI 0-15 Single-ended analog input channels

NI 5751/5751B Getting Started Guide | © National Instruments | 7

Caution To avoid permanent damage to the NI 5751/5751B, disconnect all signals

connected to the NI 5751/5751B before powering down the module, and connect

signals only after the adapter module has been powered on by the FlexRIO FPGA

module or controller for FlexRIO.

Caution Connections that exceed any of the maximum ratings of any connector on

the NI 5751/5751B can damage the device and the chassis. NI is not liable for any

damage resulting from such connections.

Pinout and Signal Information

The following figure shows the pinout for the VHDCI connector.

8| ni.com | NI 5751/5751B Getting Started Guide

Figure 2. NI 5751 Digital Connector Pinout

GND

DO 1

GND

DO 3

DO 5

DO 7

DI 1

DI 3

DI 5

DI 7

DO 0

GND

DO 2

DO 4

DO 6

DI 0

DI 2

DI 4

DI 6

GND

The following figure shows the pinout for the analog connector on the front panel of the

NI 5751/5751B.

NI 5751/5751B Getting Started Guide | © National Instruments | 9

Figure 3. NI 5751 Analog Input CH 0 to CH 15

GND

AI 0

GND

AI 2

GND

AI 4

GND

AI 6

GND

AI 8

AI 10

GND

AI 12

AI 14

GND

AI 1

AI 3

AI 5

AI 7

AI 9

AI 11

AI 13

AI 15

GND

Clocking

The NI 5751/5751B clock source controls the sample rate and other timing functions on the

device. The following table contains information about the possible NI 5751/5751B clock

sources.

10 | ni.com | NI 5751/5751B Getting Started Guide

Andere Handbücher für NI 5751

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere National Instruments Adapter Handbücher

National Instruments

National Instruments 5783 Bedienungsanleitung

National Instruments

National Instruments VXI-1000 Bedienungsanleitung

National Instruments

National Instruments PCI/PXI GIGABIT ETHERNET ADAPTERS Bedienungsanleitung

National Instruments

National Instruments NI 6535 Bedienungsanleitung

National Instruments

National Instruments 1483R Bedienungsanleitung

National Instruments

National Instruments 5741 Bedienungsanleitung

National Instruments

National Instruments NI 9149 Bedienungsanleitung

National Instruments

National Instruments 68M-50F STEP Bedienungsanleitung

National Instruments

National Instruments NI-6589 Bedienungsanleitung

National Instruments

National Instruments REM-11180 Bedienungsanleitung

National Instruments

National Instruments NI 9949 RJ-50 Bedienungsanleitung

National Instruments

National Instruments SCXI-1349 Bedienungsanleitung

National Instruments

National Instruments SCXI-1362 Bedienungsanleitung

National Instruments

National Instruments 5762R Bedienungsanleitung

National Instruments

National Instruments NI 5782R Bedienungsanleitung

National Instruments

National Instruments BNC-2115 Bedienungsanleitung

National Instruments

National Instruments 6584R Bedienungsanleitung

National Instruments

National Instruments 68VHDCI-50F SSR 8 Bedienungsanleitung

National Instruments

National Instruments USB-6001 Bedienungsanleitung

National Instruments

National Instruments NI 6584R Bedienungsanleitung

National Instruments

National Instruments NI 9147 Bedienungsanleitung

National Instruments

National Instruments TC-2190 Bedienungsanleitung

National Instruments

National Instruments NI 5762 Bedienungsanleitung

National Instruments

National Instruments NI-5752B Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung