NEC NEC Express5800 Series Anleitung zur Verwendung
System Release Notes
Express5800 LS2400 System
Release Notes
PN: 455-01543-003
Proprietary Notice and Liability Disclaimer
The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.
and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights
to this document, including all design, manufacturing, reproduction, use, and sales rights
thereto, except to the extent said rights are expressly granted to others.
The NEC Computers Inc. product(s) discussed in this document was warranted in
accordance with the terms of the Warranty Statement accompanying each product.
However, actual performance of each such product is dependent upon factors such as
system configuration, customer data, and operator control. Since implementation by
customers of each product may vary, the suitability of specific product configurations and
applications must be determined by the customer and is not warranted by NEC Computers
Inc.
To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Computers Inc. is prohibited.
Trademarks
Microsoft is a registered trademark and MSDOS and Windows NT are trademarks of Microsoft Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
SCO OpenServer is a trademark of The Santa Cruz Operation, Inc.
UnixWare 7 is a registered trademark of The Santa Cruz Operation, Inc.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks
of their respective trademark owners.
February 2000
Copyright 1999, 2000
NEC Computers Inc.
8350 Fruitridge Road
Sacramento, CA 95826
All Rights Reserved
Express5800 LS2400 System
Release Notes
The Express5800 Server LS2400 System Release Notes provide up-to-date
information on your system. These notes also provide additional valuable
information about your system that was not included in the user’s guide.
Please read these notes in their entirety.
CONTENTS
Introduction............................................................................................................................................ 3
General Comments................................................................................................................................. 3
Advisories .............................................................................................................................................. 3
EXPRESSBUILDER......................................................................................................................... 3
Novell NetWare................................................................................................................................. 4
SCO ................................................................................................................................................... 4
Documentation Errata ............................................................................................................................ 4
Chapter 3, BIOS Setup Configuration Tables.................................................................................... 4
Boot Menu ......................................................................................................................................... 4
nec
Express5800 LS2400 System Release Notes 3
Introduction
These System Release Notes cover the following topics:
!General Comments
!Advisories
!Documentation Errata
General Comments
The following general comments apply to this server.
!Versions of the Network Operating Systems tested and recommended are:
Windows NT® 4.0 Server with Service Pack 4
IntraNetWare 4.11 with Support Pack 5b
Novell® NetWare® 3.12
SCO OpenServer™ 5.04 with Maintenance Supplement 504C
UnixWare 7.1
The system roadmap label located inside your system may incorrectly show
system board Jumper H set at pins 1-2. Jumper H on the system board is actually
set at pins 2-3. The pin 2-3 jumper setting is correct.
Advisories
This section contains advisories on the EXPRESSBUILDER, Novell NetWare, and
SCO.
EXPRESSBUILDER
The following advisory applies to all versions of EXPRESSBUILDER.
!If you already have an operating system installed when creating a
maintenance partition, EXPRESSBUILDER will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition. Run the SSU and other utilities
from diskette.
4Express5800 LS2400 System Release Notes
Novell NetWare
The following advisory applies when using Novell NetWare 3.12.
!CDROM.NLM does not support 32X CD-ROM drives. Because of this,
the 32X CD-ROM drive cannot be mounted and accessed from a remote
client.
!When either the 3C905 or the PRO100+ LAN cards are installed in the
system, the latest versions of the ETHERTSM.NLM and MSM31X.NLM
support modules must be used. These files are located in the
LANDR9.EXE file available from the Novell web site. Additionally,
your operating system should include the latest available 312PTD.EXE
patch, also available from the Novell web site. Install the 312PTD.EXE
patch before installing LANDR9.EXE.
!Installation of two 3C905 LAN cards is not supported.
SCO
The following advisory applies when using SCO 5.04.
!In a multiprocessor environment, the 3C905B LAN card driver IRQ
cannot be shared with another system IRQ.
Documentation Errata
Please note the following changes to the Express5800 LS2400 User’s Guide.
Chapter 3, BIOS Setup Configuration Tables
Replace the Boot Menu table with the following table.
Boot Menu
Feature Choices Description Your Setting
Extended RAM
Step
1MB
1KB
Every Location
No Memory Test
Tests Extended Memory
once per MB, or
once per KB, or
every location, or
no memory test.
Boot Device
Priority
Press ENTER.Refer to “Boot Device Priority
Submenu.”
Hard Drive Press ENTER.Refer to “hard Drive
Submenu.”
Removable
Devices
Press ENTER.Refer to “Removable Devices
Submenu.”
Andere Handbücher für NEC Express5800 Series
107
Inhaltsverzeichnis
Andere NEC Server Handbücher
NEC
NEC Express5800/E120d-M Bedienungsanleitung
NEC
NEC NEAX2000 IPS Benutzerhandbuch
NEC
NEC EXPRESS5800/140He Bedienungsanleitung
NEC
NEC Express5800/T110g-S Bedienungsanleitung
NEC
NEC SIGMABLADE AD106a Bedienungsanleitung
NEC
NEC Express5800/T71h Bedienungsanleitung
NEC
NEC 5020M-16 Bedienungsanleitung
NEC
NEC Express5800/R320c-E4 Bedienungsanleitung
NEC
NEC 340Hb-R Bedienungsanleitung
NEC
NEC Univerge SV8100 Bedienungsanleitung
NEC
NEC NEC Express5800 Series Betriebsanleitung
NEC
NEC NEC Express5800 Series Bedienungsanleitung
NEC
NEC Univerge SV8100 Bedienungs- und Montageanleitung
NEC
NEC Express5800/320Lb FT Linux Bedienungsanleitung
NEC
NEC Univerge UM8000 Bedienungsanleitung
NEC
NEC LS2400 Bedienungsanleitung
NEC
NEC N8100-1793F Bedienungsanleitung
NEC
NEC R320a-E4 Bedienungsanleitung
NEC
NEC Series3800/S120R-1 Bedienungsanleitung
NEC
NEC EXP200 Bedienungsanleitung
Beliebte Server Handbücher anderer Marken
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung
Planet
Planet NAS-7410 Bedienungsanleitung