NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

202-10064-02, June 2005

202-10064-02 v1.1

June 2005

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

Phone 1-888-NETGEAR

Reference Manual for the

NETGEAR ProSafe 802.11g

Wireless Access Point

WG102

202-10064-02, June 2005

iii

Technical Support

Please register to obtain technical support. Please retain your proof of purchase and warranty

information.

To register your product, get product support or obtain product information and product

documentation, go to http://www.NETGEAR.com. If you do not have access to the World Wide

Web, you may register your product by filling out the registration card and mailing it to

NETGEAR customer service.

You will find technical support information at:

http://www.NETGEAR.com/ through the customer service area. If you want to contact technical

support by telephone, see the support information card for the correct telephone number for your

country.

Trademarks

NETGEAR is a registered trademark of NETGEAR, INC. Windows is a registered trademark of Microsoft

Corporation. Other brand and product names are trademarks or registered trademarks of their respective

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the

right to make changes to the products described in this document without notice. NETGEAR does not

assume any liability that may occur due to the use or application of the product(s) or circuit layout(s)

described herein.

Modifications made to the product, unless expressly approved by Netgear, could void the user’s authority to

operate the equipment. NETGEAR does not assume any liability that may occur due to such condition.

202-10064-02, June 2005

FCC Statement

DECLARATION OF CONFORMITY

We Netgear,

4500 Great America Parkway

Santa Clara, CA 95054, USA

Tel: +1 408 907 8000

declare under our sole responsibility that the product(s)

WG102 (Model Designation)

802.11g ProSafe Wireless Access Point (Product Name)

complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

To assure continued compliance, any changes or modifications not expressly approved by

the party responsible for compliance could void the user's authority to operate this

equipment. (Example - use only shielded interface cables when connecting to computer or

peripheral devices).

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

202-10064-02, June 2005

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try and correct the interference by one or more of the

following measures:

• Reorient or locate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Placement and Range Guidelines

Indoors, computers can connect over 802.11 wireless networks at a maximum range of several hundred feet

for 802.11b/g devices. However, the operating distance or range of your wireless connection can vary

significantly, based on the physical placement of the wireless access point.

For best results, identify a location for your wireless access point according to these guidelines:

• Away from potential sources of interference, such as PCs, large metal surfaces, microwaves, and 2.4 GHz cordless

phones.

• In an elevated location such as a high shelf that is near the center of the wireless coverage area for all mobile

devices.

Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly

connect to the wireless access point.

RF Exposure Warning for North America, and Australia

Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device

(see below) must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons.

Further, the antennas shall not be colocated with other antenna or radio transmitter.

202-10064-02, June 2005

Antenna Statement for North America and Australia

In addition to its own antenna, the WG102 device has been approved for use with the following detachable

antennas and antenna cables:

* WG102 maximum radiated power in North America and Australia: 19 dBm – cable loss + antenna gain

Please go to www.netgear.com/go/wg102_fcc for an updated list of wireless accessories approved to be used with

the WAG302 in North America and Australia.

Industry Canada Compliance Statement

This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment

Regulations ICES 003.

Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur

NMB-003.

The device is certified to the requirements of RSS-210 for 2.4 GHz spread spectrum devices. The use of this

device in a system operating either partially or completely outdoors may require the user to obtain a license

for the system according to the Canadian regulations. For further information, contact your local Industry

Canada office.

Europe - EU Declaration of Conformity

A printed copy of the EU Declaration of Conformity certificate for this product is provided in the WG102

product package.

Approved

Antennas Antenna Gain

and type Approved Antenna

Cable Antenna

Cable Length Maximum

Transmitted Power*

NETGEAR

ANT24D18 18dBi,directional

outdoor/indoor NETGEAR

ACC-10314-01 thru 05 1.5 m to 30 m 18 dBm + 18 dBi ant.

NETGEAR

ANT2409

9 dBi,

omnidirectional

outdoor/indoor

NETGEAR

ACC-10314-01 thru 05 1.5 m to 30 m 18 dBm + 9 dBi ant.

NETGEAR

ANT24O5 5 dBi, ceiling/wall

indoor NETGEAR

ACC-10314-01 thru 05 1.5 m to 30 m 18 dBm + 5 dBi ant.

202-10064-02, June 2005

vii

Antenna Statement for the European Community

Please note that the 100mW EIRP limit and regulations could vary in Europe from country to country.

Please check the regulations in your country.

The antenna cable type and length must comply with European regulations. Refer to the table below for

approved antenna and cable accessories.

In addition to its own antenna, the WG102 device has been approved for use with the following detachable

antennas and antenna cables:

* WG102 maximum radiated power in the European Community: 15 dBm – cable loss + antenna gain

Please go to www.netgear.com and use the search feature to find an updated list of wireless accessories

approved to be used with the WG102 in the European Community.

Bestätigung des Herstellers/Importeurs

Es wird hiermit bestätigt, daß das NETGEAR WG102 ProSafe 802.11g Wireless Access Point gemäß der im

BMPT-AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das

vorschriftsmäßige Betreiben einiger Geräte (z.B. Testsender) kann jedoch gewissen Beschränkungen

unterliegen. Lesen Sie dazu bitte die Anmerkungen in der Betriebsanleitung.

Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf

den Markt gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu

überprüfen.

Approved

Antennas Antenna Gain

and type Approved

Antenna Cable Minimum

Antenna

Cable

Length

Minimum

Antenna

Cable

Attenuation

Maximum

Transmitted

Power*

NETGEAR

ANT24D18

18 dBi,

directional

outdoor/indoor

NETGEAR

ACC-10314-05 30 m 18 dB -3 dBm + 18 dBi

= 15 dBm EIRP

NETGEAR

ANT2409

9 dBi,

omnidirectional

outdoor/indoor

NETGEAR

ACC-10314-04

ACC-10314-05

10 m 6.1 dB 8.9 dBm + 9 dBi

= 17.9 dBm EIRP

NETGEAR

ANT24O5 5 dBi, ceiling/wall

indoor

NETGEAR

ACC-10314-01

thru 05 1.5 m 1.1 dB 14 dBm + 5 dBi

= 19 dBm EIRP

202-10064-02, June 2005

viii

Certificate of the Manufacturer/Importer

It is hereby certified that the NETGEAR WG102 ProSafe 802.11g Wireless Access Point has been

suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992.

The operation of some equipment (for example, test transmitters) in accordance with the regulations may,

however, be subject to certain restrictions. Please refer to the notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the

market and has been granted the right to test the series for compliance with the regulations.

Product and Publication Details

Model Number: WG102

Publication Date: June 2005

Product Family: wireless access point

Product Name: NETGEAR WG102 ProSafe 802.11g Wireless Access Point

Home or Business Product: Business

Language: English

Publication Part Number: 202-10064-02 v1.1

Contents ix

202-10064-02, June 2005

Contents

Chapter 1

About This Manual

Audience, Scope, Conventions, and Formats ................................................................1-1

How to Use This Manual ................................................................................................1-2

How to Print this Manual .................................................................................................1-2

Chapter 2

Introduction

About the NETGEAR WG102 ProSafe 802.11g Wireless Access Point ........................2-1

Key Features ..................................................................................................................2-2

802.11g Standards-based Wireless Networking ......................................................2-3

Autosensing Ethernet Connections with Auto Uplink ...............................................2-4

Wireless Multimedia (WMM) Support ................................................................2-4

Compatible and Related NETGEAR Products .........................................................2-4

System Requirements ....................................................................................................2-4

What’s In the Box? .........................................................................................................2-5

Hardware Description .....................................................................................................2-5

Front Panel ...............................................................................................................2-6

Rear Panel ...............................................................................................................2-7

Chapter 3

Basic Installation and Configuration

Observing Placement and Range Guidelines .................................................................3-1

Cabling Requirements ..............................................................................................3-2

Default Factory Settings ...........................................................................................3-3

Understanding WG102 Wireless Security Options .........................................................3-4

Installing the WG102 Access Point ................................................................................3-5

How to Log In to the WG102 Using Its Default IP Address ..........................................3-10

Using the Basic IP Settings Options .............................................................................3-11

Understanding Wireless Settings .................................................................................3-12

Understanding WEP/WPA Security Options .................................................................3-15

Before You Change the SSID and WEP Settings ..................................................3-17

How to Set Up and Test Basic Wireless Connectivity ............................................3-18

202-10064-02, June 2005

xContents

How to Restrict Wireless Access by MAC Address ...............................................3-19

How to Configure WEP ..........................................................................................3-20

How to Configure WPA with Radius .......................................................................3-22

How to Configure WPA-PSK ..................................................................................3-25

How to Configure WPA2 with Radius .....................................................................3-26

How to Configure WPA2-PSK ................................................................................3-28

How to Configure WPA and WPA2 ........................................................................3-29

How to Configure WPA2-PSK and WPA2-PSK ......................................................3-32

Chapter 4

Management

Using Syslog and Activity Log Information .....................................................................4-1

Viewing General and Statistical Information ...................................................................4-2

Statistics ...................................................................................................................4-4

Viewing a List of Attached Devices .................................................................................4-5

Upgrading the Wireless Access Point Software .............................................................4-5

Configuration File Management .....................................................................................4-6

Saving and Retrieving the Configuration ..................................................................4-7

Restoring the WG102 to the Factory Default Settings .............................................4-7

Using the Reset Button to Restore Factory Default Settings ...................................4-7

Changing the Administrator Password .....................................................................4-8

Using SNMP Remote Management ...............................................................................4-9

Chapter 5

Advanced Configuration

Hotspot Settings .............................................................................................................5-1

Understanding Advanced Wireless Settings ..................................................................5-1

AutoCell RF Management ........................................................................................5-2

Configuration .....................................................................................................5-3

AutoCell AP/Client Interaction ...........................................................................5-4

Additional AutoCell View Management Options ................................................5-4

Configuring Advanced Wireless Settings .......................................................................5-5

AP Settings: Enabling Wireless Bridging and Repeating ...............................................5-7

How to Configure a WG102 as a Point-to-Point Bridge ...........................................5-9

How to Configure Multi-Point Wireless Bridging ....................................................5-10

How to Configure Wireless Repeating ...................................................................5-11

Andere Handbücher für WG102 - ProSafe Wireless Access Point

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR WAX615 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNAP320 Bedienungsanleitung

NETGEAR

NETGEAR WNHDE111 Bedienungsanleitung

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WN802T Bedienungsanleitung

NETGEAR

NETGEAR WG602v4 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE WNDAP380R Bedienungsanleitung

NETGEAR

NETGEAR WAX220 Bedienungsanleitung

NETGEAR

NETGEAR PowerLine XWNB5602 Bedienungsanleitung

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Montageanleitung

NETGEAR

NETGEAR WG602v2 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX214 Bedienungsanleitung

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WN802Tv2 - Wireless-N Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX204 Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WE102 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX610 Bedienungsanleitung

NETGEAR

NETGEAR HE102 - Wireless Access Point Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung