NETGEAR XWN5001 Bedienungsanleitung

350 East Plumeria Drive

San Jose, CA 95134

USA

October 2012

202-11003-01

v1.0

Powerline 500 WiFi Access

Point (XWN5001)

User Manual

Powerline 500 WiFi Access Point (XWN5001)

Support

Thank you for choosing NETGEAR.

After installing your device, locate the serial number on the label of your product and use it to register your product

at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website. For product updates and web

support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at

http://support.netgear.com/general/contact/default.aspx.

NETGEAR recommends that you use only the official NETGEAR support resources.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

Revision History

Publication Part Number Version Publish Date Comments

202-11003-01 v1.0 October 2012 First publication

Contents

Chapter 1 Getting Started

Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

LED and Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

How the Powerline AV 500 Access Point Fits in Your Network . . . . . . . . . . 8

Set Up the Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Set Up a New Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Add the Access Point to an Existing Powerline Network . . . . . . . . . . . . 11

Set Up the Access Point Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . 12

Method A: Use NETGEAR genie for Wireless Setup . . . . . . . . . . . . . . . 12

Method B: Use the WPS Button for Wireless Setup . . . . . . . . . . . . . . . . 15

Join the Access Point Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Powerline Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Use the Security Button to Set the Encryption Key . . . . . . . . . . . . . . . . . . 17

Chapter 2 Using NETGEAR genie

Install NETGEAR genie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Powerline Utility Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Security Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

View the Link Rate between Powerline Devices . . . . . . . . . . . . . . . . . . . . 23

Change the Name of a Powerline Device. . . . . . . . . . . . . . . . . . . . . . . . . . 24

Turn LEDs Off or On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Set the Powerline Encryption Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Reset a Device to Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Add a Device to the Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Access NETGEAR Web genie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Chapter 3 Troubleshooting

This chapter includes:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Basic Functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

If You Do Not See All Your Devices with the NETGEAR genie . . . . . . . . . 36

If You Do Not See the Powerline Icon on Your Network Map . . . . . . . . . . 37

Symantec Endpoint Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Appendix A Supplemental Information

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Powerline 500 WiFi Access Point (XWN5001)

Appendix B Notification of Compliance

Index

1. Getting Started

This chapter describes your Powerline 500 WiFi Access Point (XWN5001) and how your access

point can fit into a home network. It also explains the security features and how to customize the

encryption key for added security.

This chapter includes:

• Hardware Features

• How the Powerline AV 500 Access Point Fits in Your Network

• Set Up the Powerline Network

• Set Up the Access Point Wireless Network

• Join the Access Point Wireless Network

• Powerline Network Security

• Use the Security Button to Set the Encryption Key

For more information about the topics covered in this manual, visit the support website at

http://support.netgear.com.

Getting Started

Powerline 500 WiFi Access Point (XWN5001)

Hardware Features

The package includes a Powerline 500 WiFi Access Point (XWN5001) and an Ethernet

cable.

Powerline 500 WiFi Access Point

Ethernet cable

Figure 1. Package contents

Power

LED

Factory

Reset

button

On/Off

switch

Ethernet

port

Security

button

Powerline

LED

Wireless

LED

Ethernet

LED

Figure 2. Powerline 500 WiFi Access Point (XWN5001)

Getting Started

Powerline 500 WiFi Access Point (XWN5001)

LED and Feature Descriptions

Buttons

• Factory Reset. Use the Factory Reset button to return your Powerline device to its

default factory settings. Press the Factory Reset button for 2 seconds, and then release

it.

• Security. The Security button has the following three functions:

-Once the Powerline devices are active, you can use the Security button to add

encryption to your Powerline network. See Use the Security Button to Set the

Encryption Key on page 17.

-You can use the Security button to clone the WiFi network of your wireless router or

gateway without typing the network name (SSID) and password. See Method B: Use

the WPS Button for Wireless Setup on page 15.

-The Security button provides an easy way (WPS) for your wireless client to join the

WiFi network access point. See Join the Access Point Wireless Network on page 16.

• On/Off. Use the On/Off switch to turn the device on and off.

Table 1. LED descriptions

Item Description

Power 

LED

• Solid green. The electrical power is on.

• Blinking green. The device is in the process of restarting or setting up security.

• Amber. Power saving mode. The unit enters power saving mode if the Ethernet port is not

linked for more than 10 minutes.

• Off. There is no electrical power, or power has been turned off through the NETGEAR

genie.

Powerline LED • Solid. The device is connected to a Powerline network.

• Off. The device has not found any other compatible Powerline devices using the same

encryption key or has been turned off through the NETGEAR genie.

The Pick A Plug feature lets you pick the electrical outlet with the fastest link rate, indicated by

the color displayed by the LED:

Green. Link rate > 80 Mbps

(Best)

Good for HD video

Amber. Link rate > 50 < 80

Mbps (Better)

Good for SD video

Red. Link rate < 50 Mbps

(Good)

Good for data

Wireless LED • Solid green. The wireless radio is on.

• Off. The wireless radio is off.

Ethernet LED • Solid green. The device has an active Ethernet connection.

• Off. There is no Ethernet connection.

Getting Started

Powerline 500 WiFi Access Point (XWN5001)

Ethernet Port

Plug one end of the Ethernet cable that comes with the Powerline 500 WiFi Access Point

(XWN5001) into this port and the other end either into your router, or into the computer or

another peripheral device.

Product Label

The product label shows unique details specific to your device. The product label is on the

back of the device. The label contains the following information.

• Model number

• Powerline MAC address

• Ethernet/wireless MAC address

• Serial number

• Device password

• WPS security PIN

• Default wireless network name (SSID)

• Default network key

How the Powerline AV 500 Access Point Fits in Your

Network

You can use one or more Powerline 500 WiFi Access Points to extend your home network

anywhere in your house using your electrical power lines.

A Powerline network consists of two or more compatible Powerline devices that communicate

with each other. One of the Powerline devices is connected with an Ethernet cable to your

router so that the Powerline network is linked to your local area network (LAN). That way

each Powerline device can communicate with the router and use its Internet connection.

Getting Started

Powerline 500 WiFi Access Point (XWN5001)

The following illustration shows an existing Powerline network with one Powerline device in

Room 1, a second Powerline device in Room 2, and a Powerline 500 WiFi Access Point

(XWN5001) in Room 3:

Reset

Room 1 Room 2 Room 3

Powerline

XWN5001

Figure 3. Powerline access point connected to the Powerline network and wireless network

To form a Powerline network you need at least two compatible Powerline devices (including

the Powerline 500 WiFi Access Point).

For best performance, plan the location of your Powerline devices:

• Use an electrical outlet that is not controlled by a wall switch to avoid someone

unknowingly turning off the power to the outlet.

• Do not plug Powerline products into a power strip, extension cord, or surge protector as

this might prevent them from working correctly or reduce the network performance.

• Avoid plugging Powerline products into electrical outlets located near an appliance that

uses a lot of power, such as a washer or dryer, or a refrigerator. This could potentially

prevent the Powerline devices from working correctly, or reduce network performance.

Getting Started

Powerline 500 WiFi Access Point (XWN5001)

Set Up the Powerline Network

You can set up a Powerline network that includes the access point or you can add the access

point to an existing Powerline network.

Set Up a New Powerline Network

Different Powerline models can share the network. All NETGEAR Powerline AV products are

compatible.

To set up a new Powerline network:

1. Make sure that your WiFi router or gateway is

connected to the Internet and that your Ethernet

wired connections are working.

a. On a computer that is connected to your router or

gateway using an Ethernet cable, open a web

browser and navigate to a web page.

b. On a computer or device that is connected to your

wireless network, open a web browser and

navigate to a web page.

2. Plug the first Powerline device (sold separately) into a

wall outlet near your router or gateway. Then, connect

the device to the LAN port on your router or gateway

using an Ethernet cable.

For more detailed instructions, see the installation guide that came in the package.

3. During setup, plug the access point into a wall outlet

near your router or gateway.

4. Use the provided Ethernet cable to connect the

access point to an Ethernet port on a computer for

initial setup.

The Powerline devices attempt to detect each other

and form a Powerline network. This process could

take a few minutes.

5. Wait for each Powerline device to be recognized by

the Powerline network.

The Power and Powerline LEDs should light. This

process could take as little as 5 seconds, or up to 80

seconds. If the Powerline LEDs are green or amber,

the devices are successfully connected. A red LED

indicates a slow link rate. In this case, move the device or access point to another

electrical outlet with a faster connection.

6. Set up the access point wireless network as explained in Set Up the Access Point

Wireless Network on page 12.

Reset

XWN5001

First device

Andere Handbücher für XWN5001

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR N150 WN604 Bedienungsanleitung

NETGEAR

NETGEAR WN802Tv1 - Wireless-N Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAB102 - 802.11a+b Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAX618 Bedienungsanleitung

NETGEAR

NETGEAR FWG114Pv2 - Wireless Firewall With USB Print... Bedienungsanleitung

NETGEAR

NETGEAR prosafe WAC740 Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WG102-500 Bedienungsanleitung

NETGEAR

NETGEAR Orbi RBE971 Bedienungsanleitung

NETGEAR

NETGEAR Orbi PRO SRS60 Bedienungsanleitung

NETGEAR

NETGEAR WAX630E Bedienungsanleitung

NETGEAR

NETGEAR WG103 ProSafe Bedienungsanleitung

NETGEAR

NETGEAR WNHDE111-100NAS Bedienungsanleitung

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

NETGEAR

NETGEAR WAX630 Bedienungsanleitung

NETGEAR

NETGEAR WAC124 Bedienungsanleitung

NETGEAR

NETGEAR WN203 Bedienungsanleitung

NETGEAR

NETGEAR WAX206 Bedienungsanleitung

NETGEAR

NETGEAR HE102 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE WNDAP380R Bedienungsanleitung

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

NETGEAR

NETGEAR WAX202 Bedienungsanleitung

NETGEAR

NETGEAR WE102 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAG102 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung