Netis WF-2118 Bedienungsanleitung
WF-2117/WF-2118 Wireless N PCI
Adapter
Quick Installation Guide
Wireless-N PCIAdapter Quick Installation Guide
1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this equipment.
(Example- use only shielded interface cables when connecting to computer or peripheral
devices)
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
Wireless-N PCIAdapter Quick Installation Guide
2
modifications to this equipment. Such modifications could void the user authority to operate
the equipment
1Package Contents
The following items should be found in yourpackage:
ØWireless-N PCI Adapter
ØCD-ROM
ØQuick Installation Guides
Make sure that the package contains above items. If any of the listed items is damaged or
missing, please contact with your distributor.
2Product Overview
Wireless-N PCI Adapter is a powerful 32-bit PCI Adapter that installs quickly and easily into
PCs. The Adapter can be used in Ad-Hoc mode to connect directly with other cards for
peer-to-peer file sharing or in Infrastructure mode to connect with a wireless access point or
router for access to the Internet in your office or home network.
Wireless-N PCI Adapter connects with 802.11n networks at up to an incredible 150Mbps!
And for added versatility, it can also interoperate with all the up to 54Mbps 802.11g or
11Mbps 802.11b products found in homes, businesses, and public wireless hotspots around
the country. And in every mode, your wireless communications are protected, so your data
stays secure.
3System Requirement
You must have the following at least
ØA desktop computer with an available 32-bit PCI slot.
ØAt least a 300 MHz processor and 32 MB of memory
ØAn 802.11b/g/n Access Point (for Infrastructure Mode) or another 802.11b/g/n wireless
adapter (for Ad-Hoc, Peer-to-Peer networking mode.)
Wireless-N PCIAdapter Quick Installation Guide
3
4Driver and Hardware Installation
4.1 Driver installation of the Wireless-N PCIAdapter
Turn on the computer and Insert the Wireless-N PCI Adapter Driver CD in the CD-ROM
drive. The Install Screen will appear. If not, click the Start button and choose Run and enter
D:\autorun.exe (if ‘D’is the letter of your CD-ROM drive)
Select Drivers, choose the modem of your product and operate according to the instruction.
The following is the step-by-step instructions in Windows XP. The steps and screens are
similar for the other Windows operating systems
ØSelect “I accept the tems of the license agreement” and then click Next
Figure 4-1
ØSelect “Install driver and Ralink WLAN Utility” and Click Next
Wireless-N PCIAdapter Quick Installation Guide
4
Figure 4-2
ØSelect “Ralink Configuration Tool” and Click Install
Wireless-N PCIAdapter Quick Installation Guide
5
Figure 4-3
ØClick Install
Wireless-N PCIAdapter Quick Installation Guide
6
Figure 4-4
ØClick Finish to finish the driver installation
Wireless-N PCIAdapter Quick Installation Guide
7
Figure 4-5
4.2 Hardwareinstallation of the Wireless PCI Adapter
4.2.1 Install the Wireless-N PCI adapter into your computer
ØMake sure to turn off your computer and unplug the power cord. Remove the back cover
of the computer.
ØInstall the Wireless-N PCI Adapter carefully and firmly seat it into an available PCI slot
(to avoid damage caused by static electricity, make sure to properly ground yourself by
first touching a metal part of your computer to discharge any static electricity before
working with the Wireless-N PCI Adapter).
ØSecure the Wireless-N PCI Adapter back panel shield with a screw.
ØReplace the computer’s cover.
ØPlace the computer back in its normal position.
Wireless-N PCIAdapter Quick Installation Guide
8
ØAttach the Wireless-N PCI Adapter’s antenna to the socket on the back panel shield.
4.2.2 Restart your computer
Turn on the computer, the Found New Hardware Wizard (windows XP) screen will appear:
ØSelect Install the software automatically (Recommended) and then click Next
Figure 4-6
ØClick Finish to finish the hardware installation
Figure 4-7
The installation is completed
Wireless-N PCIAdapter Quick Installation Guide
9
5Connecting to a wireless network
Use the Ralink WLAN Utility to check the link information, search for available wireless
networks, or create profiles that hold different configuration settings. You can double-click
the icon on your desktop to run it. Another way to start the Configuration Utility is to click
Start>All Programs> Ralink Wireless> Ralink Wireless Utility.
You can use the following method to connect to a wireless network
ØDouble click the icon on the desk-top
ØSelect Available Network tab and click Refresh button to refresh current available
wireless network, you can double click it after highlighting a wireless network you want
to connect
Figure 5-1
ØThe wireless network properties are as follows. If it is encrypted, you need to enter
Network Key and confirm if and then click OK.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Netis PCI-Karte Handbücher
Beliebte PCI-Karte Handbücher anderer Marken
Conrad Electronic
Conrad Electronic 97 46 71 Bedienungsanleitung
Micro Innovations
Micro Innovations USB650A Bedienungsanleitung
KTI Networks
KTI Networks KF-310 Bedienungsanleitung
Asus
Asus SpaceLink WL230 Bedienungsanleitung
SIIG
SIIG SC2475 Bedienungsanleitung
TRENDnet
TRENDnet TEW-703PI Bedienungsanleitung
Belkin
Belkin F5D7000F Bedienungsanleitung
Pericom
Pericom PI7C7100 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3548 Bedienungsanleitung
Digium
Digium TE200 Series Bedienungsanleitung
Allo.com
Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung
Western Digital
Western Digital FireWire PCI Adapter Bedienungsanleitung