Netvox R718CXAB Bedienungsanleitung

Wireless Temperature And Humidity And Thermocouple Measurement

Model: R718CXAB

Wireless Thermocouple and

Temperature/Humidity Sensor

R718CXAB

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict

confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The

specifications are subject to change without prior notice.

Table of Contents

1. Introduction................................................................................................2

2. Appearance.................................................................................................3

3. Features ......................................................................................................3

4. Set up Instruction .......................................................................................4

5. Data Report ................................................................................................5

5.1 Example of ReportDataCmd ..............................................................5

5.2 Example of ConfigureCmd.................................................................7

5.3 Example of GlobalCalibrateCmd .......................................................8

5.4 Set/GetSensorAlarmThresholdCmd...................................................9

5.5 Example for MinTime/MaxTime logic ............................................10

6. Information about Battery Passivation ....................................................11

6.1 To determine whether a battery requires activation .........................11

6.2 How to activate the battery...............................................................11

7. Important Maintenance Instruction..........................................................12

8. Description of Waterproof Grade ............................................................13

1. Introduction

R718CKAB: The temperature/humidity sensor and K-type thermocouple can respectively detect the temperature and humidity, and an

object's surface temperature. The temperature measurement range of R718CK is -40 °C to +375°C. R718CK has the

features of good linearity, larger thermal electromotive force, high sensitivity and stability. It should not be used in

sulfuric environments, reducing, oxidizing, and vacuum atmospheres, or weak oxidizing atmosphere.

R718CTAB: The temperature/humidity sensor and T-type thermocouple can respectively detect the temperature and humidity, and an

object's surface temperature. The temperature measuring range of R718CT is -40 °C to +125°C but it works more stably in

the range of -40°C to 0°C.

R718CNAB: The temperature/humidity sensor and N-type thermocouple can respectively detect the temperature and humidity, and an

object's surface temperature. The temperature measuring range of R718CK is -40 °C to +800°C, which is wider than other

types of thermocouples.

LoRa Wireless Technology:

LoRa is a wireless communication technology that adopts techniques such as long-distance communication and low power

consumption. Compared with other communication methods, LoRa spread-spectrum modulation techniques greatly expand the

communication distance. It is used in long-distance and low-data wireless communications like automatic meter reading, building

automation equipment, wireless security systems, and industrial monitoring control system. The features include small size, low

power consumption, long transmission distance, and anti-interference ability.

LoRaWAN：

LoRaWAN built LoRa’s end-to-end standards and techniques, ensuring interoperability between devices and gateways from different

manufacturers.

2. Appearance

3. Features

⚫SX1276 wireless communication module

⚫2 ER14505 battery in parallel (AA size 3.6V/for each battery)

⚫IP65 rating

⚫Magnetic base

⚫Thermocouple detection

⚫Temperature/Humidity detection

⚫Compatible with LoRaWANTM Class A device

⚫Frequency hopping spread spectrum

⚫Support third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

⚫Low-power design for longer battery life

Note:

Please refer to http://www.netvox.com.tw/electric/electric_calc.html for battery life calculation and other detailed informatio

R718CKAB

R718CTAB

R718CNAB

Temperature and humidity sensor

Indicator

Function Key

Thermocouple

4. Set up Instruction

On/Off

Power on

Insert batteries. (Users may need a screwdriver to open battery cover.)

Turn on

Press and hold the function key for 3 seconds until the green indicator flashes.

Turn off (Reset to factory setting)

Press and hold the function key for 5 seconds until green indicator flashes fast for 20 times.

Power off

Remove Batteries.

Note

1. When user removes and inserts the battery; the device should be off by default.

2. 5 seconds after power on, the device will be in engineering test mode.

3. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor

inductance and other energy storage components.

Network Joining

Never joined the network

Turn on the device to search the network to join.

The green indicator stays on for 5 seconds: Success

The green indicator remains off: Fail

Had joined the network

(without factory resetting)

Turn on the device to search the previous network to join.

The green indicator stays on for 5 seconds: Success

The green indicator remains off: Fail

Fail to join the network

User is recommended to check the device verification information on the gateway or consult

your platform server provider.

Function Key

Press and hold for 5 seconds

Reset to factory setting/Turn off

The green indicator flashes 20 times: Success

The green indicator remains off: Fail

Press once

The device is in the network: green indicator flashes once and sends a report.

The device is not in the network: green indicator remains off

Sleeping Mode

The device is on and in the network

Sleeping period: Min Interval.

When the reportchange exceeds the setting value or the state changes, the device will send a

data report based on the Min Interval.

Low Voltage Warning

Low Voltage

3.2 V

5. Data Report

The device will immediately send a version packet report along with an uplink packet including temperature and battery voltage.

The device sends data based on the default configuration before any configuration is done.

Default:

Max Interval: 0x0384 (900s)

Min Interval: 0x0384 (900s) (Automatically checking the current voltage every Min Interval)

BatteryChange: 0x01 (0.1V)

TemperatureChange:0x01 (1°C)

AirTemperatureChange: 0x01 (1℃)

AirHumidChange: 0x01 (1%)

Note:

1. The interval of the data reports might vary due to the firmware.

2. The interval between two reports must be the minimum time.

3.Please refer to the Netvox LoRaWAN Application Command and http://www.netvox.com.cn:8888/cmddoc for devices’ data

analysis.

Data report configuration and sending period are as following:

5.1 Example of ReportDataCmd

FPort：0x06

Bytes

Var(Fix=8 Bytes)

Version

DeviceType

ReportType

NetvoxPayLoadData

Version–1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version

DeviceType–1 byte –Device Type of Device

The devicetype is listed in Netvox LoRaWAN Application Devicetype doc

ReportType – 1 byte –the presentation of the NetvoxPayLoadData，according the devicetype

NetvoxPayLoadData– Fixed bytes (Fixed =8bytes)

Min Interval

(Unit: second)

Max Interval

(Unit: second)

Reportable Change

Current Change≥

Reportable Change

Current Change＜

Reportable Change

Any number between

1~65535

Any number between

1~65535

Cannot be 0.

Report per Min Interval

Report per Max Interval

Device

Type

Report

Type

NetvoxPayLoadData

R718CKAB

R718CTAB

R718CNAB

0xC4

0xC5

0xCE

0x01

Battery

(1Byte)

unit:0.1V

Temperature

(Signed2Bytes)

unit:0.1°C

AirTemperature

(Signed2Bytes)

unit:0.01°C

AirHumidity

(2Bytes)

unit:0.01%

ThresholdAlarm(1Byte)

Bit0_LowTemperatureAlarm

Bit1_HighTemperatureAlarm

Bit2_LowAirTemperatureAlarm

Bit3_HighAirTemperatureAlarm

Bit4_LowAirHumidityAlarm

Bit5_HighAirHumidityAlarm

Bit6-7:Reserved

Example of Uplink: 01C40124028A0B0E1A9001

1st byte (01): Version

2nd byte (C4): DeviceType 0xC4－R718CKAB

3rd byte (01): ReportType

4th byte (24): Battery－3.6v , 24 Hex=36 Dec 36*0.1v=3.6v

5th 6th byte (028A): Temperature－65°C, 028A(HEX)=650(DEC),650*0.1°C =65.0°C

7th 8th byte (0B0E): Air Temperature－28.3°C, 0B0E(HEX)=2830(DEC),2830*0.01°C =28.30°C

9th 10th byte (1A90): Air Humidity－68%, 1A90(HEX)=6800(DEC),6800*0.01%=68.00%

11th byte (01): Threshold Alarm－Low Temperature Alarm, Bit 0 =1

Tips

1. Battery Voltage:

The voltage value is bit 0 ~ bit 6, bit 7=0 is normal voltage, and bit 7=1 is low voltage.

Battery=0xA0, binary=1010 0000, if bit 7= 1, it means low voltage.

The actual voltage is 0010 0000 = 0x20 = 32, 32*0.1v =3.2v

2. Version Packet:

When Report Type=0x00 is the version packet, such as 01C4000A0B202005200000, the firmware version is 2020.05.20

3. Data Packet:

When Report Type=0x01 is data packet.

4. Signed Value:

When the temperature is negative, 2's complement should be calculated.

0000 0001

5.2 Example of ConfigureCmd

FPort：0x07

Bytes

Var (Fix =9 Bytes)

CmdID

DeviceType

NetvoxPayLoadData

CmdID–1 byte

DeviceType–1 byte –Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

Description

Device

Cmd

Device

Type

NetvoxPayLoadData

Config

ReportReq

R718CKAB

R718CTAB

R718CNAB

0x01

0xC4

0xC5

0xCE

MinTime

(2bytes)

Unit:s

MaxTime

(2bytes)

Unit:s

Battery

Change

(1byte)

Unit:0.1v

Temperature

Change

(1byte)

Unit:1℃

AirTemperature

Change

(1byte)

Unit:1℃

AirHumid

Change

(1byte)

Unit:1%

Reserved

(1Byte)

Fixed

0x00

Config

ReportRsp

0x81

Status

(0x00_success)

Reserved (8Bytes,Fixed 0x00)

ReadConfig

ReportReq

0x02

Reserved

(9Bytes,Fixed 0x00)

ReadConfig

ReportRsp

0x82

MinTime

(2bytes)

Unit:s

MaxTime

(2bytes)

Unit:s

Battery

Change

(1byte)

Unit:0.1v

Temperature

Change

(1byte)

Unit:1℃

AirTemperature

Change

(1byte)

Unit:1℃

AirHumid

Change

(1byte)

Unit:1%

Reserved

(1Byte)

Fixed

0x00

(1)Configure R718CKAB report parameters:

MinTime = 1min (0x3c), MaxTime = 1min (0x3c), BatteryChange = 0.1v (0x01), TemperatureChange = 5℃ (0x05),

AirTemperatureChange=5℃ (0x05), AirHumidChange=5% (0x05)

Downlink: 01C4003C003C0105050500

Response:

81C4000000000000000000 (Configuration success)

81C4010000000000000000 (Configuration failure)

(2) Read Configuration:

Downlink: 02C4000000000000000000

Response: 82C4003C003C0105050500 (Current configuration)

5.3 Example of GlobalCalibrateCmd

FPort： 0x0E

Description

CmdID

Sensor

Type

PayLoad (Fix =9 Bytes)

SetGlobal

CalibrateReq

0x01

Channel(1Byte)

0_Channel1,

1_Channel2,etc

Multiplier

(2bytes,Unsigned)

Divisor

(2bytes,Unsigned)

DeltValue

(2bytes,Signed)

Reserved

(2Bytes,Fixed

0x00)

SetGlobal

CalibrateRsp

0x81

Channel(1Byte)

0_Channel1,

1_Channel2,etc

Status

(1Byte,0x00_success)

Reserved

(7Bytes,Fixed 0x00)

GetGlobal

CalibrateReq

0x02

Channel

(1Byte,0_Channel1,1_Channel2,etc)

Reserved

(8Bytes,Fixed 0x00)

GetGlobal

CalibrateRsp

0x82

Channel(1Byte)

0_Channel1,

1_Channel2,etc

Multiplier

(2bytes,Unsigned)

Divisor

(2bytes,Unsigned)

DeltValue

(2bytes,Signed)

Reserved

(2Bytes,Fixed

0x00)

ClearGlobal

CalibrateReq

0x03

Reserved

(10Bytes,Fixed 0x00)

ClearGlobal

CalibrateRsp

0x83

Status

(1Byte,0x00_success)

Reserved

(9Bytes,Fixed 0x00)

Sensor Type - byte

0x01_Temperature Sensor (Thermocouple temperature & air temperature)

0x02_Humidity Sensor

Channel - byte

0x00_ Thermocouple Temperature

0x01_Air Temperature

0x02_ Air Humidity

(1) Calibrate the R718CKAB thermocouple temperature sensor by increasing 10℃

Sensor type:0x01 Channel: 0x00, Multiplier: 0x0001, Divisor: 0x001, DeltValue: 0x0064

Downlink: 0101000001000100640000 // 0064 Hex = 100 Dec, 100*0.1°C=10°C

Response: 8101000000000000000000 // Configuration success

8101000100000000000000 // Configuration failure

※Unit:

Thermocouple temperature: 0.1°C

Air temperature: 0.01°C

Air humidity: 0.01°%

(2) Read Configuration:

Downlink: 0201000000000000000000

Response: 8201000001000100640000 // Current configuration

5.4 Set/GetSensorAlarmThresholdCmd

Fport:0x10

The threshold value could be configured by users. (Default setting is disabled)

If the sensor shows 0xFFFFFFFF, the high / low threshold function is disabled.

Cmd

Descriptor

CmdID

(1Byte)

Payload(10Bytes)

SetSensorAlarm

ThresholdReq

0x01

Channel(1Byte)

0x00_Channel1,

0x01_Chanel2,

0x02_Channel3,etc)

SensorType(1Byte)

0x00_Disable ALL Sensor threshold.

0x01_Temperature,

0x02_Humidity,

SensorHigh

Threshold

(4Bytes)

SensorLow

Threshold

(4Bytes)

SetSensorAlarm

ThresholdRsp

0x81

Status

(0x00_success)

Reserved (9Bytes,Fixed 0x00)

GetSensorAlarm

ThresholdReq

0x02

Channel(1Byte,

0x00_Channel1,

0x01_Chanel2,

0x02_Channel3,etc)

SensorType

(1Byte,Same as the

SetSensorAlarmThresholdReq’s

SensorType)

Reserved

(8Bytes,Fixed 0x00)

GetSensorAlarm

ThresholdRsp

0x82

Channel(1Byte)

0x00_Channel1,

0x01_Chanel2,

0x02_Channel3,etc)

SensorType(1Byte)

0x00_Disable ALL Sensor threshold.

0x01_Temperature,

0x02_Humidity,

SensorHigh

Threshold

(4Bytes)

SensorLow

Threshold

(4Bytes)

Channel - 1byte

0x00_ Thermocouple Temperature

0x01_Air Temperature

0x02_ Air Humidity

(1)Set the high threshold to 40.5°C and the low threshold to 10.5°C.

Downlink: 0100010000019500000069 // 195Hex=405Dec,405*0.1°C=40.5°C; 69Hex=105Dec,105*0.1°C=10.5°C.

Device returns: 8100000000000000000000 // Configuration success

※ Unit:

Thermocouple temperature: 0.1°C

Air temperature: 0.01°C

Air humidity: 0.01°%

Inhaltsverzeichnis

Andere netvox Zubehör Handbücher

netvox

netvox Z808B Bedienungsanleitung

netvox

netvox RA0716 Bedienungsanleitung

netvox

netvox R72616A Bedienungsanleitung

netvox

netvox R311LA Bedienungsanleitung

netvox

netvox R718A Bedienungsanleitung

netvox

netvox R311D Bedienungsanleitung

netvox

netvox R718PA1 Bedienungsanleitung

netvox

netvox R718PA Series Bedienungsanleitung

netvox

netvox R718VB Bedienungsanleitung

netvox

netvox R718DB2 Bedienungsanleitung

netvox

netvox R718E Bedienungsanleitung

netvox

netvox R718PG-AS923 Bedienungsanleitung

netvox

netvox R311DA Bedienungsanleitung

netvox

netvox Contact Sensor Series Bedienungsanleitung

netvox

netvox R718CK2 Bedienungsanleitung

netvox

netvox R718PB15A Bedienungsanleitung

netvox

netvox R72615A Bedienungsanleitung

netvox

netvox RA02C Bedienungsanleitung

netvox

netvox R311CA Bedienungsanleitung

netvox

netvox R720FLT Bedienungsanleitung

netvox

netvox R718X Bedienungsanleitung

netvox

netvox R718PB13 Bedienungsanleitung

netvox

netvox R718EB Bedienungsanleitung

netvox

netvox R313DB Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

netvox R718CXAB Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken