Netvox R718PA7 Bedienungsanleitung

Model：R718PA7

Wireless Noise Sensor

User Manual

This document contains proprietary technical information which is the property of

NETVOX Technology. It shall be maintained in strict confidence and shall not be

disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction........................................................................................................................2

2.Appearance.........................................................................................................................3

3. Main Feature......................................................................................................................3

4. Set up Instruction...............................................................................................................4

5. Data Report........................................................................................................................5

6. Installation .........................................................................................................................7

7. Important Maintenance Instruction ...................................................................................8

1. Introduction

R718PA7 is a Class A device based on LoRaWANTM of NETVOX and is compatible with LoRaWAN

protocol.R718PA7 can be connected with a noise sensor (RS485) externally. The noise value

collected by the device will be reported to the corresponding gateway.

LoRa Wireless Technology

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size,

low power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

2. Appearance

3. Main Feature

Adopt SX1276 wireless communication module

DC 12V adapter power supply

Noise detection

The base is attached with a magnet that can be attached to a ferromagnetic material object

Protection class IP65

Compatible with LoRaWANTM Class A

Frequency hopping spread spectrum

Configuration parameters can be configured via a third-party software platform, data can be read and

alerts can be set via SMS text and email (optional)

Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

Indicator

Function Key

4. Set up Instruction

On/Off

Power on DC12V adapter

Turn on DC12V power supply, the green indicator flashing once means turn on

successfully.

Restore to factory setting Press and hold the function key for 5 seconds till green indicator flashes

20 times.

Power off Remove DC12V adapter.

Note:

1. 5 second after power on, the device will be in engineering test mode.

2. On/off interval is suggested to be about 10 seconds to avoid the

interference of capacitor inductance and other energy storage

components.

Network Joining

Never joined the network

Turn on the device to search the network.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Had joined the network

(Not restore to the factory setting)

Turn on the device to search the previous network.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Fail to join the network Suggest to check the device verification information on the gateway

or consult your platform server provider.

Function Key

Press and hold for 5 seconds

Restore to factory setting

The green indicator flashes for 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and the

device sends a data report

The device is not in the network: green indicator remains off

5. Data Report

The device will immediately send a version package report. Then, it will send a report data with

the noise value after it is powered on for 20s.

The device sends data according to the default configuration before any other configuration.

Default setting:

MaxTime: Max Interval = 3min = 180s

MinTime: The MinTime configuration is not available.

*But the software has restriction, MinTime must be configured a number greater than 0.

Note: 1. The cycle of the device sending the data report is according to the default.

2. R718PA7 reports the noise value.

The data parsing reported by the device is referenced by the Netvox LoraWAN Application Command

document and http://www.netvox.com.cn:8888/page/index

Example of ConfigureCmd

FPort：0x07

Bytes 1 1 Var (Fix =9 Bytes)

CmdID DeviceType NetvoxPayLoadData

CmdID– 1 byte

DeviceType– 1 byte – Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

(1) Configure R718PA7 device parameters MaxTime = 60s

(The MinTime configuration is useless, but it needs to be set greater than 0 because of the software

limitation.)

Downlink: 0157000A003C0000000000

Device returns:

8157000000000000000000 (configuration success)

8157010000000000000000 (configuration failure)

(2) Read R718PA7 device parameters

Downlink: 0257000000000000000000

Device returns:

8257000A003C0000000000 (device current parameter)

Description Device CmdI

D Device

Type NetvoxPayLoadData

ConfigReport

Req

R718PA7

0x01

0x57

MinTime

(2bytes Unit: s) MaxTime

(2bytes Unit: s) Reserved

(5Bytes, Fixed 0x00)

ConfigReport

Rsp 0x81 Status

(0x00_success) Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq

0x02 Reserved (9Bytes, Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit: s) MaxTime

(2bytes Unit: s) Reserved

(5Bytes, Fixed 0x00)

6. Installation

2. The device periodically reports the data

according to Max Time. The default Max

Time is 3min.

Note: Max Time can be modified by the

downlink command, but it is not

recommended to set this time too small to

avoid excessive battery drain.

1. R718PA7 has a built-in magnet (as the figure

below). It can be attached to the surface of an iron

object conveniently and quickly when it is installed.

In order to make the device installation more secure,

use screws (purchased) to fix the device to the wall or

other surface (such as the installation diagram). The

device is screwed by two screws in the middle

(purchased by users).

Note: Do not install the device in a metal shielded box

or in an environment with other electrical equipment

around it to avoid affecting the wireless transmission

of the device.

3. The device can be used in scenarios such

as:

Smart city

Construction site

School

Residential area

7. Important Maintenance Instruction

Kindly pay attention to the following in order to achieve the best maintenance of the product:

• Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that can

corrode electronic circuits. In case the device is wet, please dry it completely.

• Do not use or store in dusty or dirty areas. This way can damage its detachable parts and

electronic components.

• Do not store in excessive heat place. High temperatures can shorten the life of electronic devices,

destroy batteries, and deform or melt some plastic parts.

• Do not store in excessive cold place. Otherwise, when the temperature rises to normal temperature,

moisture will form inside which will destroy the board.

• Do not throw, knock or shake the device. Treating equipment roughly can destroy internal circuit

boards and delicate structures.

• Do not wash with strong chemicals, detergents or strong detergents.

• Do not paint the device. Smudges can make debris block detachable parts up and affect normal

operation.

• Do not throw the battery into the fire to prevent the battery from exploding.

Damaged batteries may also explode.

All the above suggestions apply equally to your device, batteries and accessories.

If any device is not operating properly.

Please take it to the nearest authorized service facility for repairing.

Andere Handbücher für R718PA7

Inhaltsverzeichnis

Andere netvox Zubehör Handbücher

netvox

netvox R313FA1 Bedienungsanleitung

netvox

netvox RA0716 Bedienungsanleitung

netvox

netvox R718DA2 Bedienungsanleitung

netvox

netvox R311B Bedienungsanleitung

netvox

netvox R718N3 Bedienungsanleitung

netvox

netvox R311CA Bedienungsanleitung

netvox

netvox R313WA Bedienungsanleitung

netvox

netvox R311DB Bedienungsanleitung

netvox

netvox R718PA9 Bedienungsanleitung

netvox

netvox R313G Bedienungsanleitung

netvox

netvox R718F2 Bedienungsanleitung

netvox

netvox R718PA22 Bedienungsanleitung

netvox

netvox R718PQA Bedienungsanleitung

netvox

netvox ZB11C1 Bedienungsanleitung

netvox

netvox R718PA5 Bedienungsanleitung

netvox

netvox ZigBee Z801WLS Bedienungsanleitung

netvox

netvox R718PE Bedienungsanleitung

netvox

netvox R718PA11 Bedienungsanleitung

netvox

netvox R311FD Bedienungsanleitung

netvox

netvox R718EA Bedienungsanleitung

netvox

netvox R313CA Bedienungsanleitung

netvox

netvox Z809B Bedienungsanleitung

netvox

netvox R72632A01 Bedienungsanleitung

netvox

netvox ZB11A1 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

netvox R718PA7 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken