Nilfisk-Advance GD 5 BATTERY Bedienungsanleitung

ENGLISH

GD 5 Battery

Service manual

26.06.2017

GD 5 Battery variants: EU, UK, CH, AUS, CN, US.

Index

A. Preface 3

B. Technical data 5

C. Troubleshooting 6

D. Service / repair 7

E. Spare parts 16

F. Electrical diagram 20

3 A

Preface

In this manual you will find

the essentials you need to

know when repairing the GD5

Battery.

When carrying out repairs,

make sure you have a suitable

workbench or the like with the

necessary tools and power

supply available.

If you determine an error in

operation, be sure to refer the

customer to the user manual.

A fault in the equipment

can have a number of causes.

Chapter C Troubleshooting

will help you here.

Use the illustrated spare

parts lists for your repairs.

These show you the location

of the individual parts and the

sequence in which they are

assembled.

Read the technical infor-

mation sheets. These will tell

you about any technical modi-

fications made after publica-

tion of this repair manual.

Technical information sheets

are a supplement to the spare

parts list until a follow-on publi-

cation.

Repair manuals and technical

information sheets should be

available at the site where re-

pairs are carried out.

It is not permitted to give the

repair manuals to third parties.

Use original Nilsk spare

parts only!

Safety instructions marked

with this symbol in this man-

ual must be observed to

prevent danger to persons.

This symbol is used to

mark safety instructions

that must be observed to

prevent damage to the

equipment and degradation

of performance.

This symbol indicates tips

and instructions to simplify

work and to ensure safe

operation.

Symbols used to mark

instructions



4 A

Safety issues

Observe national safety

directives and regulations

for the electrical engineer-

ing trade, in particular:

IEC 60335-2-69

EN 60335-2-69

DIN VDE 105 part 1:

operation of electrical

power installations.

DIN VDE 0701/0702:

repair, modification and

testing of electrical installa-

tions.

Before starting the equip-

ment, be sure to read the

accompanying user

manual, and keep it close

as reference.

The equipment should

only be used by persons

who have been instructed

in its use and are author-

ized to do so.

Repairs should only be made

by someone who has re-

ceived proper instrucons

for the job or who is a quali-

ed electrician

WARNING:

The upper secon of the ma-

chine contains live compo-

nents. Contact with live

components leads to serious

or even fatal injuries.

Always disconnect the mains

plug before disassembly.

For your own safety

ESD (electrostac discharge)

Observe the following ESD precautions before any

repair of or near electronic parts:

• Touch the protective conductor to discharge your own body.

• Possibly wear an anti-static wrist strap.

• Use a conducting floor or tabletop.

• Never touch a circuit board or electronic components - always hold them by the

plastic or insulation.

• Transport electronic parts in conductive packaging (e.g. special ESD packages).



5 B

Technical data

GD 5 Battery specifications - all variants

6 C

Troubleshooting

Check:

- Is the battery working correctly (i.e. no

yellow or red LED on)?

- Is there power on the battery (light in

green LED when pushing battery button)?

Is power (≥30V) coming through

the battery connector?

Connect the motor directly to the

battery connector on the PCB.

Is motor running?

Yes

Machine does not start

Yes

Replace motor unit.

Check connections and

replace PCB if needed.

Check if complete machine

is working correctly.

Job done!! 

Yes

If the machine does start but

it is not possible to switch

between eco and power

boost setting test the re-

sistance on the switch.

If switch is ok the PCB ne-

eds to be replaced.

TIP: Use a Multimeter to

measure voltage and

ohm.

Is adequate resistance present on

switch (open state: ∞Ω; closed

state: <10Ω)?

Yes

No Replace switch + cord.

Is adequate resistance present on

NTC (50KΩ-150KΩ)?

NOTE:

Is power

(≥30V)

present

at the

battery?

Replace

battery.

Yes

Does battery connector

and cable appear in

good condition?

Replace

battery

connector.

Yes

Check connections and

replace PCB if needed.

1. Change motor unit 9

0. Disassembly 8

3. Change PCB 13

Service / repair

2. Change switch + cord 12

4. Change battery connector 14

5. Change battery lock 15

D.0

Disassembly

WARNING: The electric section of the machine

contains live components.

Always disconnect the battery before disassembly.

3Loosen the on/off switch to not be

connected to the harness; use a

TX10 bit (fig.1).

Unscrew the harness (fig.2).

Unscrew and remove the backco-

ver (fig.3)

TIP: Unless otherwise

stated a TX20 bit is nee-

ded for the screws.

D.1

Change motor unit

Disassemble the unit following

guide in previous section D.0.

Unscrew the cable relief (fig.1) and

disconnect the motor wires from the

PCB (fig.2+3).

WARNING: The electric section of the machine

contains live components.

Always disconnect the battery before disassembly.

D.1

Change motor unit

Loosen the latches fixing the motor

unit (fig.4).

Unscrew and remove the outer co-

ver (fig.5) and the motor cover

(fig.6).

Make notice of how the motor is

turned.

WARNING: The electric section of the machine

contains live components.

Always disconnect the battery before disassembly.

Andere Handbücher für GD 5 BATTERY

Inhaltsverzeichnis

Andere Nilfisk-Advance Staubsauger Handbücher

Nilfisk-Advance

Nilfisk-Advance VHC200 EXP Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance CUBIC Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance STEAMTEC 520 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance UZ 964 Ergoclean Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 930 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ATTIX 33 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Coupe Neo Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Handy 2-in-1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 930 Leitfaden

Nilfisk-Advance

Nilfisk-Advance GU 350 A Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance family Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GWD 255 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance VHS110 Z22 V230 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Handy 2-in-1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Thor Handbuch

Nilfisk-Advance

Nilfisk-Advance Buddy II Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance One Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ECO OIL 13 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance VHC200 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Bravo Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance IVB 995-0H/M SD XC Type 22 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Supreme 100 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Multi 20 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ALTO ATTIX 170 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch