Nordic Vibroplate Bedienungsanleitung

Read all precautions and instructions in this

manual before using this equipment.

Save this manual for future reference.

WARMING AND N TICE

DISPLAY WIND W

BUTT N DESCRIPTI N

H W T USE THE MACHINE

C NS LE SCREEN FUNCTI N

SETTING METH D F EXERCISE

PR GRAM

NOTICE FOR YOUR SAFETY

- A patient and unhealthy person should use this product after talking with a doctor.

- If you feel no good during using this product, must stop using.

Continuous using with no good condition could cause the accident or serious danger to your body.

Not

ice of Electrical power and the way of using

arning and notice for your safety

The below is written for your safety, please read and use the product properly.

If you don’t obey the notice,

physical injury and property

harm could be happen.

If you don’t obey the notice,

serious physical injury

could be happen.

This product is made for

AC 220V/50Hz

This is the mark of

Don’t use the product.

This is the mark of

prevent disassembly.

This is the mark of

prevent touching hands.

Please don’t use damaged or

no good electrical plug and outlet.

Please use AC 220V/50Hz electrical power and don’t

connect a lot of plugs into one outlet.

Please don’t touch plug with wet hands and don’t pull

out with grapping electrical lines.

If there is a water or dust on plug,

please wipe clean with dry towel

Please don’t install the product within a heater and

not let the candle or cigarette on the product.

Please don’t disassemble, repair, remodel the product

without permission

When child and old person use the product,

a guardian should be with

Don’t use the product when the product is wet.

Don’t let your hand, leg or body under the product.

Please install the product 1m apart

from the wall and furniture.

Please install on the flat area.

NOTICE OF INSTALLING PRODUCT

- An accident happen cause for user’s own discretion without reading this manual, user can’t blame

to the company.

- Please read this manual for your safety.

arning and notice for your safety

The below is written for your safety,

please read and use the product properly.

Console

Post

andle bar

Cushion

Board

VIBROPLATE PARTS

Main body

MANUAL

TIME display window–

Time displays from 00minute

00second to 10minute.

SPEED display window–

Speed displays from 1 to 16 steps.

W en use generally, display like t is.

W en setting t e user program,

display like t is. First letter is

flickered.You can set 3 user programs,

PU01~PU03

W en use

Preset program mode &

User defined program mode, display

like t is. First letter is flickered.

Preset program display from P01~P18

3 user programs display from

PU01~PU03.

START – Push this button

when start the machine.

ST P - Push this button

when stop the machine.

During working : Push the button, vibration

speed increases 0.5 step. Starts from step 1

and maximum steps are 16.

During stopping : Push the

button,increases the value of the mode you

setup

During working : Push the button, vibration

speed decreases 0.5 step.

N step speed 1 push this button, machine

speed goes to 0(halted, not stopped).

During stopping : Push the button,

decreases the value of the mode you setup.

During working : Push the button,

vibration speed goes to step 4 automatically.

During stopping : Push the button,

set the value of the mode you setup.

During working : Push the button, vibration

speed goes to step 8 automatically.

During stopping : Push the button, the

mode will be changed. Mode circulates

TIME -> SETUP USER PR GRAM ->

PR GRAM/USER PR GRAM -> TIME

During working : Push the button, vibration

speed goes to step 12 automatically.

During stopping : Push the button,

reset the value of the mode you setup.

Initialize value you setup.

Display window

PROGRAM

display window

Button

description

1. General using (Manual mode operation)

- Insert the plug to the outlet.

- Turn on the power switch, the machine will turn on with the “beep” sound.

LED on the console is on and first letter of value on TIME display flickered.

- Push the START button and select the speed using UP/D WN button.

- Push the ST P button, the machine stops.

∗

∗∗

∗ The machine will stop automatically after 1 minutes from the start.

Using continuously over 1 minutes will be harmful to user.

2. Time setting using (Count down time mode operation)

- Insert the plug to the outlet.

- Turn on the power switch, the machine will turn on with the “beep” sound.

LED on the console is on and first letter of value on TIME display flickered.

- When the TIME display flickered, push UP/D WN button and setup time you want to

use. Time can setup from 10 seconds to 10 Minutes, time value is up and down 10 seconds.

- Push SET button when you choose the time.

During setting the time, push RESET button the value of the time goes to zero.

- Push START button and select the speed using UP/D WN button.

- When the machine start, the time you set counts down

- When the time goes to zero, the machine stops with “beep” sound.

- During the machine is working, push the ST P button, the machine stops.

3. Preset program using (Preset program mode operation)

- Insert the plug to the outlet.

- Turn on the power switch, the machine will turn on with the “beep” sound.

LED on the console is on, and the first value on TIME display flickered.

- Push MODE button until P01 is displayed on the Program display.

- Use UP/DOWN button, select preset program from P01~P18, PU01~PU03.

P 1~P18 : Preset program

PU 1~PU 3 : User defined program (Confer No.4 the below)

During selection, push RESET button the value of the program goes to P01

If you’d like to see all of the program list, please see the page 05

- Push SET button when you choose the program.

- Push START button, the program starts automatically.

n Program mode operation, you can’t change the speed

Program running time is as below

P 1~P 6 : 5 steps, 1 minute per step and total time is 5 minutes.

P 7~P12 : 7 steps, 1 minute per step and total time is 7 minutes.

P13~P18 : 9 steps, 1 minute per step and total time is 9 minutes.

PU 1~PU 3 : 7 steps, 1 minute per step and total time is 7 minutes.

You can make the program as you want.

- Program finished, the machine stops automatically,

If you want to stop the machine during working, push STOP button.

HO TO USE THE MACHINE

4. User program setting and using (User defined program mode operation)

- Insert the plug to the outlet,

- Turn on the power switch, the machine will turn on with the “beep” sound.

LED on the console is on and first letter of value on TIME display flickered.

- Push MODE button until PU01 is displayed on the Program display.

- Push the UP/DOWN button, select user program from PU01~PU03.

- Push SET button when you choose the user program.

Display changes to “1 01” on the PROGRAM display.

First “1” means the step, second “01” does the speed.

User program has 7 steps and on every step you can choose the speed 1 to 12.

During the program mode, you can’t change the speed

- Use the UP/DOWN button to select the speed of each step and push SET button to confirm.

Finished 1 step, the display will change to the next step.

You should choose 7 steps on the 1 user program.

- You should set user program first, and use user program.

- using User program is written on the No3. preset program using.

HO TO USE THE MACHINE

Andere Nordic Fitnessgeräte Handbücher

Nordic

Nordic 300 Cycle Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung