NordicTrack X7i Incline Trainer Bedienungsanleitung

X7i Incline Trainer USERʼS MANUAL

CAUTION

Read all precautions and instructions in

this manual before using this equipment.

Save this manual for future reference.

CALL TOLL-FREE: 1-888-825-2588 Mon.–Fri. 6 a.m.–6 p.m. MT; Sat. 8 a.m.–4 p.m. MT

ON THE WEB: www.nordictrackservice.com

QUESTIONS?

If you have questions, or if parts are damaged

or missing, DO NOT CONTACT THE STORE;

please contact Customer Care.

IMPORTANT: To help us assist you, please

warranty on page 38) before contacting

Customer Care.

Model No. NTL20909.3

Serial No.

Write the serial number here (see page 6).

TABLE OF CONTENTS

WARNING ECALPLACEMENT ..............................................................3

IMPORTANTPRECAUTIONS .................................................................4

BEFOREYOUBEGIN .......................................................................6

ASSEMBLY ...............................................................................7

OPERATIONAN A JUSTMENT ............................................................14

HOWTOMOVETHEINCLINETRAINER.......................................................26

TROUBLESHOOTING ......................................................................27

EXERCISEGUI ELINES ...................................................................30

PARTLIST ...............................................................................31

EXPLO E RAWING .....................................................................33

OR ERINGREPLACEMENTPARTS..........................................................37

LIMITE WARRANTY ......................................................................38

NordicTrack is a registered trademark of ICON IP, Inc.

This drawing shows the locations of the warning decals.

If a decal is missing or illegible, call the telephone

number on the front cover of this manual and re-

quest a free replacement decal. Apply the decal in

the location shown. Note: The decals may not be

shown at actual size.

WARNING DECAL PLACEMENT

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this incline trainer are ade-

quately informed of all warnings and precau-

tions.

3. Use the incline trainer only as described.

4. Keep the incline trainer indoors, away from

moisture and dust. Do not put the incline

trainer in a garage or covered patio, or near

water.

5. Place the incline trainer on a level surface,

with at least 8 ft. (2.4 m) of clearance behind

it and 2 ft. (0.6 m) on each side. Do not place

the incline trainer on any surface that blocks

air openings. To protect the floor or carpet

from damage, place a mat under the incline

trainer.

6. Do not operate the incline trainer where

aerosol products are used or where oxygen

is being administered.

7. Keep children under age 12 and pets away

from the incline trainer at all times.

8. The incline trainer should be used only by

persons weighing 350 lbs. (159 kg) or less.

9. Never allow more than one person on the in-

cline trainer at a time.

10. Wear appropriate exercise clothes when

using the incline trainer. Do not wear loose

clothes that could become caught in the in-

cline trainer. Athletic support clothes are rec-

ommended for both men and women. Always

wear athletic shoes. Never use the incline

trainer with bare feet, wearing only stockings,

or in sandals.

11. When connecting the power cord (see page

14), plug the power cord into a surge suppres-

sor (not included) and plug the surge sup-

pressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 14. To purchase a surge suppressor, see

your local NordicTrack dealer or call the tele-

phone number on the front cover of this man-

ual and order part number 146148, or see your

local electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the incline trainer. If the control

system is damaged, the walking belt may

slow, accelerate, or stop unexpectedly, which

may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the incline

trainer if the power cord or plug is damaged,

or if the incline trainer is not working prop-

erly. (See TROUBLESHOOTING on page 27 if

the incline trainer is not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the incline

trainer (see HOW TO TURN ON THE POWER

on page 16).

17. Never start the incline trainer while you are

standing on the walking belt. Always hold the

handrails while using the incline trainer.

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your incline trainer before using your incline trainer.

ICON assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

IMPORTANT PRECAUTIONS

18. The incline trainer is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

20. Never leave the incline trainer unattended

while it is running. Always remove the key,

unplug the power cord, and press the power

switch into the off position when the incline

trainer is not in use. (See the drawing on page

6 for the location of the power switch.)

21. Do not attempt to move the incline trainer until

it is properly assembled. (See ASSEMBLY on

page 7, and HOW TO MOVE THE INCLINE

TRAINER on page 26.) You must be able to

safely lift 45 lbs. (20 kg) to move the incline

trainer.

22. Do not change the incline of the incline

trainer by placing objects under the incline

trainer.

23. Inspect and properly tighten all parts of the

incline trainer regularly.

24. Never insert or drop any object into any

opening on the incline trainer.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning

the incline trainer, and before performing the

maintenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

26. The incline trainer is intended for in-home use

only. Do not use the incline trainer in any

commercial, rental, or institutional setting.

27. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Thank you for selecting the revolutionary NordicTrack®

INCLINE TRAINER X7i INTERACTIVE. The INCLINE

TRAINER X7i INTERACTIVE offers a selection of fea-

tures designed to make your workouts at home more

enjoyable and effective.

For your benefit, read this manual carefully before

using the incline trainer. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number is shown on the front cover of this man-

ual. The location of the serial number decal is shown

below.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

Handrail

Console

Fan

Key/Clip

Power Switch

Walking Platform

Power Cord

Platform Cushion

Wheel

Idler Roller

Adjustment Bolts

Accessory Tray

Walking Belt

Pulse Sensor

Serial Number

Decal

ASSEMBLY

Assembly requires two persons. Set the incline trainer in a cleared area and remove all packing materials. Do

not dispose of the packing materials until assembly is completed. Note: The underside of the incline trainer

walking belt is coated with high-performance lubricant. uring shipping, some lubricant may be transferred to the

top of the walking belt or the shipping carton. This is normal and does not affect incline trainer performance. If

there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive

cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-

aging parts, do not use power tools for assembly. Extra hardware may be included.

#8 x 3/4"

Screw (1)–16

#8 x 1" Tek

Screw (2)–4

3/8" Star

Washer (8)–8

5/16" Star

Washer (9)–4

Base Foot Spacer

(11)–4 3/8" x 3 1/2" Patch Bolt (5)–4

5/16" x 2 3/4" Bolt (4)–4

3/8" x 5" Patch Bolt (34)–4

#8 x 1 1/2"

Screw (104)–2

1. To make assembly easier, read the information on

page 7 before you begin.

Make sure that the power cord is unplugged.

With the help of a second person, tip the incline

trainer onto its left side. Have the second per-

son hold the incline trainer to prevent it from

falling.

Attach four Base Feet (10) and four Base Foot

Spacers (11) to the Base (80) with four #8 x 1"

Tek Screws (2) in the locations shown. Be care-

ful not to overtighten the Tek Screws.

2. Identify the Right Upright (79), which is marked

with a “Right” sticker. Hold the Right Upright

near the incline trainer.

See the lower inset drawing. Tie the wire tie in

the Right Upright (79) around the end of the

Upright Wire (78). See the upper inset draw-

ing. Then, pull the other end of the wire tie until

the Upright Wire is routed out of the side hole

near the top of the Right Upright.

Orient the Right Upright (79) as shown. Attach

the Right Upright to the Base (80) with two 3/8"

x 3 1/2" Patch Bolts (5) and two 3/8" Star

Washers (8). Start both Patch Bolts, and then

tighten each of them. Be careful not to pinch

the Upright Wire (78).

With the help of a second person, tip the incline

trainer onto its right side. Have the second per-

son hold the incline trainer to prevent it from

falling.

Attach the Left Upright (not shown) as de-

scribed above. Note: There are no wires on the

left side.

78 Wire

Tie

11 10

Wire

Tie

Wire

Tie

3. With the help of a second person, carefully tip

the incline trainer down so that the Base (80) is

flat on the floor.

104

4. Set the Console Cover (87) face down on a soft

surface. Remove the two #8 x 1 1/2" Screws

(104) from the Console Back (89). Save the

Screws for step 6. Separate the Console Back

from the Console Cover, and remove the

Console Crossbar (not shown) from inside.

6. Set the Console Cover (87) on the Uprights (77,

79). Make sure that the Console Cover is ori-

ented with the ties toward the bottom as shown.

Attach the Console Cover (87) with the two #8 x

1 1/2" Screws (104) that you removed in step 4.

Start both Screws, and then tighten each of

them. Do not overtighten the Screws.

Insert the Upright Wire (78) through the loops in

the ties.

Ties

104

5. Position the Console Crossbar (103) between

the Uprights (77, 79) as shown. Attach the

Console Crossbar to the Uprights with four 5/16"

x2 3/4" Bolts (4) and four 5/16" Star Washers

(9). Do not fully tighten the Bolts yet.

Remove the wire tie from the Upright Wire (78).

103

Wire Tie

7. Have a second person hold the Left Pulse

Handrail (86) near the Left Upright (77). Insert

the Left Pulse Wire (90) from the Left Pulse

Handrail through the hole in the Left Upright and

pull it out of the hole in the side of the Left

Upright. Then, insert the Left Pulse Wire through

the loops in the ties.

Attach the Left Pulse Handrail (86) to the Left

Upright (77) with two 3/8" x 5" Patch Bolts (34)

and two 3/8" Star Washers (8). Do not fully

tighten the Patch Bolts yet.

Attach the Right Pulse Handrail (102) to the

Right Upright (79) as described above. Then,

tighten all four Patch Bolts (34).

102 86

91 34

90 Hole

Ties

8. Have a second person hold the Console (85)

near the Console Cover (87). Insert the wires

from the Console through the indicated hole.

Connect the Upright Wire (78), the Left and

Right Pulse Wires (90, 91), and the Ground

Wire (97) to the wires extending from the

Console (85). See the inset drawing. The con-

nectors should slide together easily and

snap into place. If they do not, turn one con-

nector and try again. IF YOU DO NOT CON-

NECT THE CONNECTORS PROPERLY, THE

CONSOLE MAY BECOME DAMAGED WHEN

YOU TURN ON THE POWER.

Hole

Console Wire

Wires

Ties

Andere Handbücher für X7i Incline Trainer

Dieses Handbuch passt für folgende Modelle

Andere NordicTrack Tretmühle Handbücher

NordicTrack

NordicTrack T12 Si Cwl Treadmill Bedienungsanleitung

NordicTrack

NordicTrack E 3700 Treadmill Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack NTL77806.2 Bedienungsanleitung

NordicTrack

NordicTrack Ex 3300 Treadmill Benutzerhandbuch

NordicTrack

NordicTrack T5.7 NTL61011.0 Bedienungsanleitung

NordicTrack

NordicTrack NTTL25901 Bedienungsanleitung

NordicTrack

NordicTrack T20.0 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack C1250 Bedienungsanleitung

NordicTrack

NordicTrack C900 Pro Bedienungsanleitung

NordicTrack

NordicTrack EXP1000 NETL09912 Bedienungsanleitung

NordicTrack

NordicTrack C2270 NTL12950 Bedienungsanleitung

NordicTrack

NordicTrack NTTL09711 Bedienungsanleitung

NordicTrack

NordicTrack 1500 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack E 3700 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack 2200 R Bedienungsanleitung

NordicTrack

NordicTrack NTL99115.1 Bedienungsanleitung

NordicTrack

NordicTrack NTTL90081 Bedienungsanleitung

NordicTrack

NordicTrack T 13.0 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NTL14908.0 Bedienungsanleitung

NordicTrack

NordicTrack C1550 831.24922.0 Bedienungsanleitung

NordicTrack

NordicTrack C 2300 NCTL12940 Bedienungsanleitung

NordicTrack

NordicTrack T 7.2 Treadmill Benutzerhandbuch

NordicTrack

NordicTrack NTL19011.0 Bedienungsanleitung

NordicTrack

NordicTrack NTL10851 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

Master

Master F22 Bedienungsanleitung

Precor

Precor PRECISION SERIES Technisches Handbuch

Horizon Fitness

Horizon Fitness DT680 Bedienungsanleitung

Matrix

Matrix T130 XI Bedienungsanleitung