Norton Blockbuster BBL727 Bedienungsanleitung

OWNERS MANUAL

Blockbuster®Large Masonry Saw

Models:

BBL547 BBL527 BBL727

BBL5247 BBL7247

BBL1347 BBL1327 BBL13247

Form BBL527-1327 Manual Rev 5/2021

Go to Discount-Equipment.com to order your parts

Discount-Equipment.com is your online resource for quality parts & equipment.

Florida: 561-964-4949 Outside Florida TOLL FREE: 877-690-3101

Need parts?

Click on this link: http://www.discount-equipment.com/category/5443-parts/ and

choose one of the options to help get the right parts and equipment you are looking

for. Please have the machine model and serial number available in order to help us

get you the correct parts. If you don’t find the part on the website or on once of the

online manuals, please fill out the request form and one of our experienced staff

members will get back to you with a quote for the right part that your machine needs.

We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,

Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,

Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack,

Lull, Skytrak, Tsurumi, Husquvarna Target, , Stow, Wacker, Sakai, Mi-T- M, Sullair, Basic,

Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti,

Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, Barreto, EZ Trench, Bil-

Jax, F.S. Curtis, Gehl Pavers, Heli, Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD,

Koshin, Rice, CH&E, General Equipment, ,AMida, Coleman, NAC, Gradall, Square Shooter,

Kent, Stanley, Tamco, Toku, Hatz, Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK,

Rol-Air, Small Line, Wanco, Yanmar

WARRANTY

Saint-Gobain Abrasives, Inc. (Norton Clipper) Products warrants all

products manufactured by it against defects in workmanship or

materials for a period of one (1) year from the date of shipment to the

customer.

The responsibility of Saint-Gobain Abrasives, Inc. under this warranty

is limited to replacement or repair of defective parts at Saint-Gobain

Abrasives, Inc. Stephenville, Texas factory, or at a point designated

by it, of such part as shall appear to us upon inspection at such point,

to have been defective in material or workmanship, with expense for

transportation borne by the customer.

In no event shall Saint-Gobain Abrasives, Inc. be liable for

consequential or incidental damages arising out of the failure of any

product to operate properly.

Integral units such as gasoline engines, electric motors,batteries,

tires, transmissions, etc., are excluded from this warranty and are

subject to the prime manufacturer's warranty.

This warranty is in lieu of all other warranties, expressed or implied,

and all such other warranties are hereby disclaimed.

Important: Before placing equipment in operation, record the following

information.

MODEL: _________ SERIAL NO.: ___________

PURCHASE FROM: _____________________

ADDRESS: ____________________________

CITY: _______ STATE: ______ ZIP: ________

TELEPHONE NO. ______________________

Before using this equipment, make sure that person using it

Read and understand the instructions in this owner’s manual.

Go to Discount-Equipment.com to order your parts

Table of Contents

Section Page

I. Preparation 4-16

A. Safety Precautions 4

Dust and Silica Warning 4

B. Assembly 6

C. Assembly Conveyor Cart & Guide a Cut 6-7

D. BBL Series Masonry Saw Specifications 8

E. Electrical Connections 9-10

F. Wiring Diagram 10-14

BBL527, BBL547, BBL5247 5HP 230v/60/1 11

BBL527 3PHASE, BBL547 3PHASE, BBL5247 3PHASE, 5HP 230-460/60/3 W/Switch

BBL727 3PHASE, BBL7247 3PHASE 7.5HP 230-460/60/3 12

BBL727 575V 3PHASE 7.5HP 575v/60/3 13

BBL527 600v 3PHASE 5HP 600/60/3 14

G. Electric Motor Trouble Shooting 15

H. Gasoline Engine 15-16

II. Operation 17-21

A. How To Mount The Blade 17

B. “Step Cutting” With Abrasive Blades 17-18

C. “Jam Cutting” And “Step Cutting With Diamond Blades 18-19

D. Dry Cutting 19

E. Wet Cutting 19-20

III. Maintenance 20-23

A. V-Belts 20-21

B. Electric Motor 20

C. Gasoline Engine 21-22

D. Blade Shaft Bearings 23

E. Water Pump 22-23

IV. Parts List 24-34

A. Ordering Information 24

B. Electric Motor And Gasoline Engine Service Information 24

C. Frame And Water Pump All BBL Models 25-26

D. Cutting Head Gasoline Models 27-29

E. Cutting Head Electric Models 30-31

F. Electric Motor 32

G. Cutting Table All BBL Models 33

H. Guide-A-Cut Assembly All BBL Models 34

Read And Understand Owner’s Manual

Before Use

Safety Alert Symbol: Information Following This Symbol Is Very

Important.

Use Only Genuine Norton Diamond Blades

Go to Discount-Equipment.com to order your parts

I. PREPARATION

A. Safety Precautions

Important! The following safety precautions must always be observed.

Hazard Symbols

Fuel (gasoline) is extremely flammable and its vapors can explode if

ignited. Store gasoline only in approved containers, in well-ventilated,

unoccupied approved areas, and away from sparks or flames. Do not

fill the fuel tank while the engine is hot or running. Do not start the

engine near spilled fuel.

Never use the fuel as a cleaning agent

Engine components can get extremely hot from operation. To prevent

burns, do not touch the engine or related parts while the engine is

running or immediately after it is turned off. Never operate the engine

with any heat shields or guards removed.

Keep all guards in place when operating any piece of equipment

Keep hands, feet, hair, and clothing away from all rotating parts

Lethal Exhaust Gas use only in well ventilated areas. Engine exhaust

gases contain poisonous carbon monoxide, which is odorless,

colorless, and can cause death if inhaled. Avoid inhaling exhaust

fumes, and never run the engine in a closed building or confined area

Never tamper with the governor components of settings to increase the

maximum speed. Severe personal injury and damage to the engine or

equipment can result if operated at speed above maximum. Always

obey the maximum speed rating of blade.

DO NOT LIFT THE SAW BY THE HANDLE OR

GUARDS!!!

Go to Discount-Equipment.com to order your parts

Dust and Silica Warning

Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate

dust, mists and fumes containing chemicals known to cause serious or fatal injury or

illness, such as respiratory disease, cancer, birth defects or other reproductive harm. If

you are unfamiliar with the risks associated with the particular process and/or material

being cut or the composition of the tool being used, review the material safety data

sheet and/or consult your employer, the material manufacturer/supplier, governmental

agencies such as OSHA and NIOSH and other sources on hazardous materials and

make certain to comply with all product warnings and instructions for the safe and

effective use of the material being cut. California and some other authorities, for

instance, have published lists of substances known to cause cancer, reproductive

toxicity, or other harmful effects.

Control dust, mist and fumes at the source where possible. In this regard use good

work practices and follow the recommendations of the manufacturer/supplier,

OSHA/NIOSH, and occupational and trade associations. Water should be used for

dust suppression when wet cutting is feasible. When the hazards from inhalation of

dust, mists and fumes cannot be eliminated through engineering controls such as

either vacuum and/or water mist, the operator and any bystanders should always wear

a respirator approved by NIOSH/MSHA for the material being cut.

California Proposition 65 Message

Some dust created by power sanding, sawing, grinding, drilling, and other construction

activities contain chemicals known (to the State of California) to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• Lead, from lead-based paints

• Crystalline silica, from bricks and cement and other masonry products

• Arsenic and chromium, from chemically treated lumber

For Addition Information Consult The Following Sources:

http://www.osha.gov/dsg/topics/silicacrystalline/index.html

http://www.cdc.gov/niosh/consilic.html

http://oehha.ca.gov/prop65/law/P65law72003.html

http://www.dir.ca.gov/Title8/sub4.html

Use Approved:

Eye Protection Hearing

Protection

Respiratory

Protection

Head Protection

Go to Discount-Equipment.com to order your parts

I. PREPARATION

B. Assembly

1. Remove machine from skid.

2. Remove the conveyor cart and guide-a-cut from the carton and place on the

pan.

3. Remove the drain plug from carton and place in drain opening in bottom of

pan.

4. Check the owner’s manual for wiring connection and proper electrical

connections before starting saw.

C. Assembly Conveyor Cart & Guide-a-Cut

The Blockbuster® Masonry saws are shipped completely assembled and

ready for use except for diamond blade, gasoline, and oil. Inspect the saw for

shipping damage. If any damage is found, contact the shipper immediately

and file a freight claim. Norton Construction Products is not

responsible for any freight-related damages. Remove the saw from

the pallet.

Items Included with the saw:

UPC Part No Item QTY Notes

00310007390 83777 Conveyor Cart Assembly 1

00310007501 83892 Guide-A-Cut Assembly 1

00310004632 75128 Splash Guard Assembly 1

00310004053 70807 Wrench 19 mm 1

00310004199 72143 Wrench 22mm 1

00310004237 72305 Water Pump Assembly 1 Gasoline Powered Machines

Only

70184668392 214169 Pump Water Electric 1 Electric Powered Machines

Only

70184650470 9602010 Fit Barb Hose 1/4FPTX1/2 1 Electric Powered Machines

Only

-NA- Form BBL527-1327

Manual Rev 7-2015 Owner’s Manual 1 Form BBL527-1327 Manual

Rev 7-2015

-NA- See Customer

Service Diamond Bade 1 General Propose Same

Diameter as Blade Size

Do not install the blade until it is time to use the saw!

ANSI regulations prohibit the transportation of any concrete saw with

the blade installed!

Go to Discount-Equipment.com to order your parts

Conveyor Cart Assembly:

Remove the Conveyor Cart and Back Stop from the Saws Water Pan, and the

Wing Nuts, Carriage Bolts, Washers, and Cart Stop from the plastic bag. Slide

one (1) Carriage Bolt thru each of the three (3) Square Holes located on the

front of the Conveyor Cart. Slide the Back Stop Over each of the Carriage

Bolts. Slide the Stop Assembly over the Carriage Bolt Located on the Left front

of the Conveyor Cart NOTE: The Rubber Stop will faces away from the

Conveyor Cart. Attach one (1) Washer and one (1) Wing Nut to each Carriage

Bolt and Tighten. See Figure 1: Back Stop Assembly. Place the Conveyor

Cart on the Machine.

Figure 1: Back Stop Assembly

Guide-A-Cut Assembly:

Attach the Guide-A-Cut to the Conveyor Cart by adjusting the Wing Bolt until

the Guide-A-Cut can slide over the Black Stop. The Guide-A-Cut will work as a

Rip Guide that is adjustable for 90and 45cuts. See Figure 2: Guide-A-Cut

Assembly.

Figure 2: Guide-A-Cut Assembly

Splash Assembly:

Remove the Splash Guard from the Saw Water Pan. Attach the Splash Guard

Spring Clips to the Pivoting Bar Located Under the Cutting Head. Note that the

rough side of the Splash Guard should face towards the front of the saw. The

Splash Guard material is made is designed for easy to cleaning. To clean,

simply rinse the Splash Guard with water until clean. The Splash Guard should

be used when wet cutting to reduce the amount of debris thrown from the blade

and cutting surface. When dry cutting the Splash Guard can be removed to

allow the dust particles to drift away from the Saw Operator.

Go to Discount-Equipment.com to order your parts

I. PREPARATION

D. BBL Series Masonry Saw Specifications

Dimensions/Weight

Length 41” (1041mm)

Width 26” (660mm)

Height (Electric) 54” (1372mm)

Height (Gas) 57” (1448mm)

Weight (Electric) Uncrated 440lbs (970kg)

Weight (Gas) Uncrated 460lbs (1014kg)

Electric Motor

Motor Mfg. Baldor

Motor Type TEFC, Thermal Protection

Motor RPM 3,450 RPM

Single Phase:

BBL527

BBL547

BBL5247

5 HP - 230v 60 Hz single Phase (Standard)

Run Amperage: 20.6 Amp @ 230v

Three Phase 5 Horse Power

BBL527 3PHASE

BBL547 3PHASE

BBL5247 3PHASE

5 HP - 230-460v 60Hz three Phase (Optional)

Three Phase 7-1/2 Horse Power

BBL727 3PHASE

BBL7247 3PHASE

7-1/2 HP 230-460v 60Hz three Phase

Run Amperage: 8.4 Amp @ 230v/4.2 Amp @ 480v

Three Phase 7-1/2 Horse Power 575v

BBL727 575v 3PHASE

7-1/2 HP 575v 60Hz three Phase (Optional)

Thee Phase 5 Horse Power 600v

BBL527 600v 3PHASE

5 HP - 600v 60 Hz single Phase (Optional)

Engine (Gasoline Models Only)

Engine Mfg. Honda

Spec No. GX390K1QXC9

Model GX390

Engine Type Single Cylinder 4 Cycle

Horse Power 13 hp (9.5kW) @ 3,600 rpm

Max Torque 19.5 ft-lbs (26.5 Nm, 2.7 kg-m) @ 2,500 rpm

Cooling System Air

Oil Capacity 1.1 liter (1.16 US qt)

Fuel Capacity 6.5 liter (1.79 US gal)

Fuel Type Unleaded Gasoline (86 pump octane)

Low Oil Sensor Yes

Air Filtration Four Stage Cyclone

Characteristics

Max Blade 20” (508 mm) or 14” (356 mm)

Depth of Cut 24” (610 mm) 10” (254 mm)

20” (508 mm) 8” (203 mm)

14” (356 mm) 5” (127 mm)

Arbor Bore 1” (25.4 mm)

Blade Shaft Locking Device Machined Into Flats Of Tight Collar

Blade Shaft Speed 24” 1,460 rpm

20” 2,400 rpm

14” 2,400 rpm

Depth Control Hand Feed With Return Spring

Depth Lock Standard

Number Of V-Belts 2

Blade Guard Type All Steel Construction

Stay Level Blade Guard Yes

Fork Lift Brackets Built In

Water Pump (Gasoline Models) Mechanically Belt Driven

Water Pump (Electric Models) Electrical 115v/60Hz

Go to Discount-Equipment.com to order your parts

I. PREPARATION

E. Electrical Connections

Important Before connecting the motor leads to the power supply, be sure that

the voltage, cycles and phase shown on the nameplate of the motor correspond to

the available power supply. Both the 5 HP and 7-1/2 HP. motors have overload

protectors and are equipped with a reset button on the motor housing. If, after

proper electrical connections are made, the motor will not run, press the reset

button to the overload protector switch. The optional 575v and 600v Three (3)

Phase motors do not have a thermal over load protector.

Failure to run the motor on the proper voltage will damage the motor and is not

covered under warranty. Improperly wired motors are not covered under warranty.

Voltage Selection for Three (3) Phase Motors 5 and 7-1/2 HP 230-480v:

Wherever possible, use 480v power supply for best operation. To change

voltage, disconnect the power form the machine, remove the terminal box cover

from the top of the motor, and change the connections as shown in the wiring

diagrams on page 12 or the chart below.

Line A Line B Line C Join Join Join Join Join Join

High (480v) 1 2 3 4,7 5,8 6,9 10 11 12

Low (230v) 1,7 2,8 3,9 10,4 11,5 12,6 – – –

Power Connections

Connect the power supply to the pigtail leads of the switch. Direct wiring

connection is preferred, but an extension cord with an electrical plug with 30 amp

minimum capacity may be used. Connecting wires should be as short as possible

and in one piece. In no case should the connecting wires be longer than shown in

the following table:

Model HP Volts Phase 50’ (15m) 100’ (30.4m) 150’ (45.7m)

BBL527

BBL547

BBL5247

5 HP 230v 1 12 AWG 12 AWG 10 AWG

BBL527 3PHASE

BBL547 3PHASE

BBL5247 3PHASE

5 HP 230-480v 3 12 AWG 12 AWG 10 AWG

BBL727 3PHASE

BBL7247 3PHASE

7.5 HP 230-480v 3 12 AWG 12 AWG 10 AWG

BBL727 575v 3PHASE 7.5 HP 575v 3 12 AWG 12 AWG 10 AWG

BBL527 600v 3PHASE 5 HP 600v 3 12 AWG 12 AWG 10 AWG

Caution-When wires that are too small gauge or too long are used, loss of power,

over heating, or possible damage to the motor will result.

Always use the proper wiring connectors that are UL/CSA approved to attach the motor to

the electrical supply. Any wiring hook ups should be made by qualified personnel and made

to National Electrical Code and to any Local Codes.

Go to Discount-Equipment.com to order your parts

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Norton Gesehen Handbücher

Norton

Norton Clipper Blockbuster BBC347 Bedienungsanleitung

Norton

Norton CTC701 Bedienungsanleitung

Norton

Norton clipper CMR 351 Bedienungsanleitung

Norton

Norton Clipper ISM Bedienungsanleitung

Norton

Norton clipper CHW Series Bedienungsanleitung

Norton

Norton TT 200 EM Bedienungsanleitung

Norton

Norton TT 250 G Bedienungsanleitung

Norton

Norton Clipper TR 232 S Bedienungsanleitung

Norton

Norton C1316 Bedienungsanleitung

Norton

Norton clipper TT 251 Bedienungsanleitung

Norton

Norton JCW 600 Bedienungsanleitung

Norton

Norton CST 65 Modulo Bedienungsanleitung

Norton

Norton clipper TR 231 GL Bedienungsanleitung

Norton

Norton C1320P Bedienungsanleitung

Norton

Norton C3120 Bedienungsanleitung

Norton

Norton Clipper CP512-300i Programmierhandbuch

Norton

Norton clipper CS1-500 P13 Bedienungsanleitung

Norton

Norton Clipper CB 311 Bedienungsanleitung

Norton

Norton clipper CM 352 Bedienungsanleitung

Norton

Norton Clipper C13PE Bedienungsanleitung

Norton

Norton Clipper CMV 1000 Verto Bedienungsanleitung

Norton

Norton BBL547 Bedienungsanleitung

Norton

Norton Clipper TR 202 Bedienungsanleitung

Norton

Norton CS 451 P13 Leitfaden

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung