Oase AquaMax Eco Premium4000 Bedienungsanleitung

21461/05-13

AquaMax Eco Premium

4000/6000/8000/10000/12000/16000/20000

21461 GAW_AquaMax Eco Premium_end_. 23.05.13 14:57 Seite 2

22265_06-13_GA_Aquamax Eco Premi2 2 01.07.2013 10:48:48

22265_06-13_GA_Aquamax Eco Premi3 3 01.07.2013 10:48:49

22265_06-13_GA_Aquamax Eco Premi4 4 01.07.2013 10:48:50

- GB -

Translation of the original Operating Instructions

Information about these operating instructions

Welcome to OASE Living Water. You made a good choice with the purchase of this product AquaMax Eco Premium

4000/6000/8000/10000/12000/16000/20000.

Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.

Ensure that all work on and with this unit is only carried out in accordance with these instructions.

Adhere to the safety information for the correct and safe use of the unit.

Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new

owner.

Symbols used in these instructions

The symbols used in this operating manual have the following meanings:

Risk of injury to persons due to dangerous electrical voltage

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-

ures are not taken.

Risk of personal injury caused by a general source of danger

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-

ures are not taken.

Important information for trouble-free operation.

Intended use

AquaMax Eco Premium 4000/6000/8000/10000/12000/16000/20000, in the following termed "unit", and all other parts

from the delivery scope may be used exclusively as follows:

−For pumping normal pond water for filters, waterfalls and water courses.

−Operation under observance of the technical data.

The following restrictions apply to the unit:

−Do not use in swimming ponds.

−Never use the unit to convey fluids other than water.

−Never run the unit without water.

−Do not use for commercial or industrial purposes.

−Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.

−Do not connect to the domestic water supply.

Safety information

Hazards to persons and assets may emanate from this unit if it is used in an improper manner or not in accordance

with its intended use, or if the safety instructions are ignored.

This unit can be used by children from the age of 8 and by persons

with physical, sensory or mental impairments or lack of experience

and knowledge, as long as they are supervised or instructed on how

to use the unit safely and are able to understand the potential haz-

ards. Do not allow children to play with the unit. Do not allow children

to clean or maintain the unit without close supervision.

Hazards encountered by the combination of water and electricity

−The combination of water and electricity can lead to death or severe injury from electrocution, if the unit is incorrectly

connected or misused.

−Prior to reaching into the water, always switch off the mains voltage to all units used in the water.

- GB -

22265_06-13_GA_Aquamax Eco Premi10 10 01.07.2013 10:48:50

- GB -

Correct electrical installation

−Electrical installations must meet the national regulations and may only be carried out by a qualified electrician.

−A person is regarded as a qualified electrician, if, due to his/her vocational education, knowledge and experience, he

or she is capable of and authorised to judge and carry out the work commissioned to him/her. This also includes the

recognition of possible hazards and the adherence to the pertinent regional and national standards, rules and regu-

lations.

−For your own safety, please consult a qualified electrician.

−The unit may only be connected when the electrical data of the unit and the power supply coincide. The unit data is

to be found on the unit type plate or on the packaging, or in this manual.

−Ensure that the unit is fused for a rated fault current of max. 30 mA by means of a fault current protection device.

−Extension cables and power distributors (e. g. outlet strips) must be suitable for outdoor use.

−Ensure that the power connection cable cross section is not smaller than that of the rubber sheath with the identifi-

cation H05RN-F. Extension cables must meet DIN VDE 0620.

−Protect the plug connections from moisture.

−Only plug the unit into a correctly fitted socket.

Safe operation

−Never operate the unit if either the electrical cables or the housing are defective!

−Do not carry or pull the unit by its electrical cable.

−Route cords/hoses/lines in a way that they are protected against damage, and ensure that they do not present a

tripping obstacle.

−Only open the unit housing or its attendant components, when this is explicitly required in the operating instructions.

−Only execute work on the unit that is described in this manual. If problems cannot be overcome, please contact an

authorised customer service point or, when in doubt, the manufacturer.

−Only use original spare parts and accessories for the unit.

−Never carry out technical modifications to the unit.

−The power connection cables cannot be replaced. When the cable is damaged, the unit or the component needs to

be disposed of.

−Only operate the unit if no persons are in the water!

−Keep the socket and power plug dry.

Important! The unit is equipped with a permanent magnet. The magnetic field may affect the function of pace-

makers.

Installation

The unit can be placed submerged or dry.

Always place the unit below water level.

Place the unit horizontally on the ground ensuring its stable position.

Connect the unit

Figure B

Recommendation for the use of the stepped hose adapter and hose connector:

AquaMax Eco Premium 4000/6000:

−Second inlet (1): Stepped hose adapter 25 to 38 mm (1 to 1½ ")

−Pump outlet (2): Hose connector 38 mm (1½ ") (alternative: stepped hose adapter 25 to 38 mm (1 to 1½ "))

AquaMax Eco Premium 8000/10000/12000/16000/20000:

−Second inlet (1): Stepped hose adapter 25 to 38 mm (1 to 1½ ")

−Pump outlet (2): Hose connector 50 mm (2 ") (alternative: stepped hose adapter 25 to 38 mm (1 to 1½ "))

Push the hose clip and the union nut over the hose. Fit the hose on the stepped hose adapter or hose connector and

secure with the hose clip.

Fit the stepped hose adapter or hose connector on the second inlet (1) or pump outlet (2) and hand-tighten the union

nut.

22265_06-13_GA_Aquamax Eco Premi11 11 01.07.2013 10:48:50

- GB -

Operate the unit with the pond filter.

Figure B

Connect the pump outlet (2) to the pond filter. Close the second inlet (1) with the screw cap.

Operate the unit with the satellite filter, or with the skimmer and pond filter.

Figure (C, D)

Connect the second inlet (1) to the satellite filter or skimmer. Connect the pump outlet (2) to the pond filter.

Set the inlet regulator

Figure (H)

Unlock the locking (9) (pull towards the inlet regulator) while pushing the inlet regulator (5) to the desired position (0 to

4).

−0: Second inlet closed. Water is only drawn in via the housing (strainer casings).

−1 to 3: Part of the water is drawn in via the housing (strainer casings), and part via the second inlet.

−4: The second inlet is fully open. Water is only drawn in via the second inlet.

Recommendation:

−When operating with the second inlet closed, turn the inlet regulator (5) to 0.

−When operating with the satellite filter or skimmer, turn the inlet regulator (5) to a position between 1 to 4.

Install the unit at a dry place

Figure (E, F)

Install the unit so that it is not exposed to direct sun radiation (max. 40 ºC).

Open the clips (3) and remove the strainer top casing.

Release the clamp (4) and take pump out of the bottom strainer casing. Pull suction adapter (6) and inlet regulator (5)

from the pump.

Remove screws provided for fastening the holder (7). Remove holder from the bottom strainer casing.

Plug the rubber feet (8) (part of the accessory kit) in the openings provided for this purpose on the bottom of the hol-

der (7).

Place the pump back into the holder (7) and fasten with the clamp (4).

Connect the suction and pressure line. The require assembly items are included in the accessory kit.

Start-up

Attention! The pump must never run dry.

Possible consequence: The pump will be destroyed.

Protective measure: Check the water level at regular intervals. Always place the unit below water level.

Attention! The installed temperature monitor automatically turns the pump off, if it is overloaded. The pump

automatically switches on again once the motor has cooled down. Risk of accident!

This is how to connect the power supply:

Switching on: Connect power plug to the socket. The unit switches on immediately when the power connection is

established.

Switching off: Disconnect the power plug.

Note:

A brand-new pump will only achieve its maximum capacity after several operating hours.

During start-up, the pump automatically undergoes a pre-programmed self-test of approx. two minutes (Environ-

mental Function Control (EFC)). The pump runs through various speeds and detects whether it runs dry (is blocked)

or is submerged. The pump switches off automatically after approx. 90 seconds if it runs dry (is blocked). The pump

automatically makes new attempts to start up at regular intervals. In the event of a malfunction, disconnect the power

supply and flood the pump or remove the obstacle. Following this, the unit can be restarted.

22265_06-13_GA_Aquamax Eco Premi12 12 01.07.2013 10:48:50

- GB -

Aquamax Eco Premium 12000, Eco Premium 16000

Figure (G)

AquaMax Eco Premium 12000/16000/20000

With the SFC function activated, the pump automatically optimises the amount of water as well as the head height. It

reduces this head height to 50 %. The SFC allows the pump to adapt to the individual pond ecology throughout the

year, it supports the pond biology (winter mode, transition mode and summer mode) by temperature dependent water

circulation and saves energy. SFC does not function when installed dry. The SFC can be activated and deactivated by

means of the slide on the pump. When deactivated, the speed does not change temperature dependent and remains

on maximum throughout the year. If a skimmer, a satellite filter or an InScenio control unit (OASE accessories!) is

used, it might be recommendable to deactivate the SFC, depending on the unit.

The pump power can only be controlled by an OASE current management unit.

Remedy of faults

Malfunction Cause Remedy

No mains voltage Check mains voltageThe unit is not performing its suction function

Impeller blocked, pump running dry Clean pump housing, check supply lines for

blockages

Strainer casing or satellite filter clogged Clean

Hose blocked Clean or replace hose

Hose kinked Eliminate kink, replace hose if it is damaged

Excessive loss in the hoses due to friction Reduce hose length to reduce frictional loss

SFC reduces the water quantity Switch off the SFC

Insufficient capacity

AquaMax Eco Premium 12000/16000/20000:

Pump overload. The capacity is automatically

reduced to protect the pump.

−Clean the pump housing

−Reduce the ambient temperature (e.g. ensure

that the specified water temperature is ad-

hered to, avoid direct sunlight)

−Ensure adequate ventilation for dry installation

Strainer casing clogged Clean strainer casingUnit switches off after a short running period

Pump running dry −Check supply lines for blockages

−Vent hoses

−Check connections for leaks

Maintenance and cleaning

Attention! Dangerous electrical voltage.

Possible consequences: Death or severe injury.

Protective measures:

−Prior to reaching into the water, disconnect the power supply to all units used in the water.

−Disconnect the power plug prior to carrying out work on the unit.

Cleaning the unit

If necessary, clean the unit with clear water using a soft brush.

−Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface or impair the

function.

−In the event of stubborn furring (calcium deposits), a common household cleaner free from vinegar and chlorine can

be used. Subsequently, clean the pump thoroughly using clear water.

Cleaning the pump

Figure (F)

Remove hoses from the unit. Open the clips (3) and remove the strainer top casing.

Release the clamp (4) and take the pump out of the bottom strainer casing. Pull the suction adapter (5) and regulator

(6) from the pump.

22265_06-13_GA_Aquamax Eco Premi13 13 01.07.2013 10:48:50

- GB -

Figure (I)

AquaMax Eco Premium 4000/6000/8000/10000:

−Vigorously turn the pump housing counter-clockwise (bayonet lock) and remove together with O ring.

−Remove the screws, intermediate housing, O ring and impeller unit.

−Clean all parts in clear water with a brush.

−Check parts for damage and replace if necessary.

−Reassemble in the reverse order.

AquaMax Eco Premium 12000/16000:

−Remove the screws and pump housing.

−Pull off the impeller unit and flat seal.

Note: When pulling out the impeller unit, the journal bearing may come loose in the motor housing.

−Clean all parts in clear water with a brush.

−Check parts for damage and replace if necessary.

−Reassemble in the reverse order.

Note: Check that the journal bearing in the motor housing is correctly seated. If necessary, press the journal bearing

with the wide grooves at the front into the seat in the motor housing.

AquaMax Eco Premium 20000:

−Take out the screws and remove the two adapter plates, the pump housing with O ring and the intermediate hous-

ing.

−Pull off the impeller unit and flat seal.

Note: When pulling out the impeller unit, the journal bearing may come loose in the motor housing.

−Clean all parts in clear water with a brush.

−Check parts for damage and replace if necessary.

−Reassemble in the reverse order.

Note: Check that the journal bearing in the motor housing is correctly seated. If necessary, press the journal bearing

with the wide grooves at the front into the seat in the motor housing.

Disposal

Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.

Disable the unit beforehand by cutting off the cables.

Storage/Over-wintering

The unit is frost resistant to minus 20 °C. Should you store the unit outside of the pond, clean it thoroughly with a soft

brush and water, check it for damage, then store immersed in water or filled with water. Do not immerse the power plug

in water!

Repair

A damaged unit cannot be repaired and must be put out of operation. Dispose of the unit in accordance with the

regulations.

Wear parts

The impeller unit is a wearing part and does not fall under the warranty.

22265_06-13_GA_Aquamax Eco Premi14 14 01.07.2013 10:48:50

115

DE Typ Bemessungsspannung Leistungsaufname Förderleistung Wassersäule Tauchtiefe Gewicht Wassertemperatur

GB Type Rated voltage Power consumption Max. flow rate Max. head height Immersion depth Weight Water temperature

FR Type Tension de mesure Puissance absorbée Capacité de refoulement Colonne d'eau Profondeur d'immersion Poids Température de l’eau

NL Type Dimensioneringsspanning Vermogensopname Pompcapaciteit Waterkolom Dompeldiepte Gewicht Watertemperatuur

ES Tipo Tensión asignada Consumo de potencia Capacidad de elevación Columna de agua Profundidad de inmersión Peso Temperatura del agua

PT Tipo Voltagem considerada Potência absorvida Débito Coluna de água Profundidade de imersão Peso Temperatura da água

IT Tipo Tensione di taratura Potenza assorbita Portata Colonna d'acqua Profondità d'immersione Peso Temperatura dell'acqua

DK Type Nominel spænding Effektforbrug Transportkapacitet Vandsøjle Bassindybde Vægt Vandtemperaturen

NO Type Merkespenning Effektopptak Kapasitet Vannsøyle Nedsenkningsdybde Vekt Vanntemperatur

SE Typ övre märkspänning Effekt Matningsprestanda Vattenpelare Doppningsdjup Vikt Vattentemperatur

FI Tyyppi mitoitusjännite Ottoteho Syöttöteho Vesipylväs Upotussyvyys Paino Veden lämpötila

HU Típus mért feszültség Teljesítményfelvétel Szállítási teljesítmény Vízoszlop Merülési mélység Súly Vízhőmérséklet

PL Typ napięcie znamionowe Pobór mocy Wydajność pompowania Słup wody Głębokość zanurzenia Ciężar Temperatura wody

CZ Typ domezovací napětí Příkon Dopravní výkon Vodní sloupec Hloubka ponoření Hmotnost Teplota vody

SK Typ dimenzačné napätie Príkon Dopravný výkon Vodný stĺpec Hĺbka ponorenia Hmotnost’ Teplota vody

SI Tip dimenzionirana napetost Poraba moči Črplana zmogljivost Vodni steber Potopna globina Teža Temperatura vode

HR Tip gornji nazivni napon Potrošnja energije Protočni kapacitet Vodeni stup Dubina uranjanja Težina Temperatura vode

RO Tip tensiunea măsuratăPutere consumatăDebit de pompare Coloanăde apăAdâncime de imersie Greutate Temperatura apei

BG Тип номинално напрежение Потребявана мощност Дебит Воден стълб дълбочина на потапяне Тегло Температурата на водата

UA Тип розрахункова напруга Споживання електроенергії Продуктивність Водяний стовп Глибина занурення Вага Температура води

RU Тип расчетное напряжение Потребление мощности Производительность Водяной столб Глубина погружения Вес Температура воды

CN 型号设计电压功耗输送能力水柱潜水深度重量水温

4000 40 W max. 4000 l/h max. 3.3 m

6000 50 W max. 6000 l/h max. 3.7 m

8000 65 W max. 8000 l/h max. 4.1 m

10000 88 W max. 10000 l/h max. 4.7 m

5.3 kg

12000 110 W max. 12000 l/h max. 5.0 m

16000 145 W max. 15.600 l/h max. 5.2 m

5.4 kg

Aquamax Eco Premium

20000

~220-240 V, 50/60 Hz

180 W max. 19.500 l/h max. 5.4 m

max. 4 m

5.7 kg

+4 … +35 °C

22265_06-13_GA_Aquamax Eco Premi115 115 01.07.2013 10:48:54

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oase Wasserpumpe Handbücher

Oase

Oase OxyMax 100 Bedienungsanleitung

Oase

Oase AquaAir 250 Bedienungsanleitung

Oase

Oase ProMax Garden Classic 3000 Leitfaden

Oase

Oase Aquarius Universal Classic 440i Bedienungsanleitung

Oase

Oase Aquarius Eco Expert 28000 Bedienungsanleitung

Oase

Oase AquaMax Eco Series Bedienungsanleitung

Oase

Oase Aquarius Eco Expert 22000 Bedienungsanleitung

Oase

Oase Water Trio Bedienungsanleitung

Oase

Oase FP 1500 Bedienungsanleitung

Oase

Oase biOrb AIR 30 Bedienungsanleitung

Oase

Oase AQUARIUS UNIVERSAL 80 Bedienungsanleitung

Oase

Oase AquaMax Eco Expert 21000 Bedienungsanleitung

Oase

Oase Pondovac Bedienungsanleitung

Oase

Oase Aquarius Universal Classic 600 Bedienungsanleitung

Oase

Oase NEPTUN 600 Bedienungsanleitung

Oase

Oase Aquarius Universal Classic 600 Bedienungsanleitung

Oase

Oase AquaMax Eco Twin 20000 Bedienungsanleitung

Oase

Oase WaterTank 50 Bedienungsanleitung

Oase

Oase AquaMax Expert Series Bedienungsanleitung

Oase

Oase Aquamax ECO 4000 Bedienungsanleitung

Oase

Oase OptiMax 2000 Produktinformationsblatt

Oase

Oase Lunaled Creative Set Bedienungsanleitung

Oase

Oase Aquarius Fountain Set Eco Leitfaden

Oase

Oase AquaMax Eco Twin 20000 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung