Olympus U-GAN Bedienungsanleitung

INSTRUCTIONS

GOUT ANALYZER

U-GAN

AX9888

This analyzer employs a UIS (Universal Infinity System) optical design. By attaching the analyzer in a slider-compatible

revolving nosepiece, gout examination can be performed by operating the lever.

Applicable revolving nosepieces: U-D6RE, U-D7RE, U-D6REM, U-D5BDRE, U-D5BDREM, U-P4RE, U-P6RE

1External View

-plate rotation lever

With built-in analyzer and -plate (sensitive color plate)

2Installation

Clamping knob

Slider-compatible revolving nosepiece

Gout analyzer

U-GAN

1. Loosen the clamping knob on the

revolving nosepiece and remove the

inserted slider or dummy slider.

2. Hold the U-GAN gout analyzer with

the labeled surface up, insert it all

the way, and tighten the clamping

knob.

3. Engage the U-POT polarizer or a po-

larizer with built-in condenser in the

light path.

This publication is printed on recycled paper.

Printed in Germany

3Gout Examination Procedure

Slider insertion direction

1. Engage the 40X objective in the light path.

2. If the condenser in use is equipped with a top lens, engage it

in the light path.

3. Set the -plate rotation lever of the U-GAN to the center posi-

tion ( · ). Look into the eyepiece and rotate the polarizer to the

darkest position.

4. Rotate the stage or specimen so that the longitudinal direction

of the crystals is in parallel with the -axis @.

At this time, the -axis direction of the -plate should be iden-

tical to the longitudinal direction of crystals.

5. Rotate the -plate rotation lever of the U-GAN fully counter-

clockwise ( ) and diagnose the gout.

Crystals are yellow Sodium urate (Gout crystal)

Crystals are blue Potassium pyrophosphate (Pseudogout crystal)

6. Rotate the -plate rotation lever of the U-GAN fully clock-

wise ( ) so that the longitudinal direction of crystal is

perpendicular to the -axis ². The examination result can be

confirmed by referring to the reversal of the color.

4Other Observations

Brightfield Observation

Loosen the clamping knob of the revolving nosepiece clamping the U-GAN, pull out the U-GAN and stop at a click

position. (Tighten the clamping knob there.)

Now the -plate is disengaged from the light path so brightfield observation is available.

Other

Set the -plate rotation lever of the U-GAN to the center position ( · ) for simple polarized light observation. However, the

contrast of the observed image may be poor because of the presence of the -plate.

Crystal

(Perpendicular to -axis ²) (Parallel with -axis @)

Andere Olympus Messgerät Handbücher

Olympus

Olympus USPM-RU-W Series Bedienungsanleitung

Olympus

Olympus ORBEYE OME-V200 Bedienungsanleitung

Olympus

Olympus 45MG Bedienungsanleitung

Olympus

Olympus DS-3000 Bedienungsanleitung

Olympus

Olympus BIX III Bedienungsanleitung

Olympus

Olympus 27MG Bedienungsanleitung

Olympus

Olympus BondMaster 600 Bedienungsanleitung

Olympus

Olympus VN-850PC Bedienungsanleitung

Olympus

Olympus Vanta iX Series Bedienungsanleitung

Olympus

Olympus OMCL-AC240TN-C3 Bedienungsanleitung

Olympus

Olympus DM-450 Bedienungsanleitung

Olympus

Olympus USPM-RUIII Series Bedienungsanleitung

Olympus

Olympus Magna-Mike 8600 Bedienungsanleitung

Olympus

Olympus OMCL-AC240TN-R3 Bedienungsanleitung

Olympus

Olympus EPOCH 650 Bedienungsanleitung

Olympus

Olympus OmniScan MX Bedienungsanleitung

Olympus

Olympus USPM-RU-W Series Bedienungsanleitung

Olympus

Olympus OMCL-AC240TS-R3 Bedienungsanleitung

Olympus

Olympus SOLTIVE Bedienungsanleitung

Olympus

Olympus 37DL PLUS Bedienungsanleitung

Olympus

Olympus 45MG Bedienungsanleitung

Olympus

Olympus Vanta L Series Bedienungsanleitung

Olympus

Olympus DELTA 50 Bedienungsanleitung

Olympus

Olympus 27MG Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung