Omron NT612G Series Bedienungsanleitung

NT600M

Programmable Terminal

Operation Manual

Revised October 1997

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers

to an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PC” means Programmable Controller and is not used as an abbreviation for any-

thing else.

IBM and IBM PC/AT are registered trademarks of International Business Machines Corporation.

MS-DOS is a registered trademark of Microsoft Corporation.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient operation

of the product.

1, 2, 3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

OMRON, 1991

form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permis-

sion of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is

constantly striving to improve its high-quality products, the information contained in this manual is subject to change

without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the informa-

tion contained in this publication.

TABLE OF CONTENTS

vii

PRECAUTIONS xi.................................

1 Intended Audience xii...........................................................

2 General Precautions xii..........................................................

3 Safety Precautions xii...........................................................

SECTION 1

Introduction 1....................................

1-1 Introduction 2............................................................

1-2 Features 4...............................................................

1-3 Terminology and NT-series Manuals 5.........................................

1-4 Models 6................................................................

1-5 Support Tools 9...........................................................

1-6 System Configuration 10.....................................................

1-7 Nomenclature and Functions 13...............................................

SECTION 2

Switch Settings, Installation, and Wiring 15.............

2-1 Switch Settings 16..........................................................

2-2 Installation Environment 20..................................................

2-3 Dimensions 22.............................................................

2-4 Installing the NT600M PT in a Panel 23........................................

2-5 Wiring and Connectors 25....................................................

2-6 RS-232C Interface Connector 27..............................................

2-7 12-key Function Key Units (for DN-type PTs) 28.................................

2-8 Mounting Function Key Units (to DN-type PTs) 28................................

SECTION 3

Initial Operation 31................................

3-1 Powering Up 32............................................................

3-2 Initialization 32............................................................

3-3 Transferring Data to and from the Support Tool 35................................

3-4 Trial Operation 37..........................................................

SECTION 4

Display Functions 39................................

4-1 Character Displays 40.......................................................

4-2 Display Graphics 41........................................................

4-3 Normal Screen Changes 42...................................................

4-4 Continuous Screens 42......................................................

4-5 Overlapping Screens 43.....................................................

4-6 Numeric Displays 45........................................................

4-7 Character Strings 46........................................................

4-8 Bar Graphs 47.............................................................

4-9 Lamps 47.................................................................

4-10 Graphics Display 48........................................................

4-11 Special Controls 48.........................................................

4-12 Terminal Function 50.......................................................

4-13 Display Speed 50...........................................................

TABLE OF CONTENTS

viii

SECTION 5

Input Functions 53.................................

5-1 On-screen Switch Inputs 54..................................................

5-2 Inputting Numeric Settings 56................................................

5-3 Standalone Function 59......................................................

SECTION 6

System Menu 61...................................

6-1 Configuration of System Menu 62.............................................

6-2 System Menu and Transmit Mode 63...........................................

6-3 Memory Switch Settings 71..................................................

SECTION 7

Online Transfer 75.................................

7-1 Host to PT 76..............................................................

7-2 PT to Host 76..............................................................

SECTION 8

Maintenance and Inspection 79.......................

8-1 Checking Operation 80......................................................

8-2 Changing the Lithium Backup Battery 80.......................................

8-3 Maintenance and Inspection 81................................................

8-4 RUN Mode Function Configuration 83.........................................

Appendices

A Standard Models 85...........................................................

B Specifications 87..............................................................

C Memory Check Table 91........................................................

D Special Characters 93..........................................................

Index 95..........................................

Revision History 97.................................

About this Manual:

This manual describes the installation and operation of the NT600M Programmable Terminals (PTs) and

includes the sections described below. Further information is provided in manuals on the Host Interface

Units and Support Tool. Refer to the list in Section 1 Introduction.

Please read this manual completely and be sure you understand the information provide before attempt-

ing to install and operate a Programmable Terminal.

Section 1 introduces the PTs, describes the terminology used in this manual, and provides examples

of system configurations for programming and operation.

Section 2 provides procedures and specifications required to set up a PT system, including hardware

switch settings and installation.

Section 3 provides steps required for initial PT operation.

Section 4 describes functions used to create screens and control display attributes on the PT.

Included is automatic transfer of data from the host computer via character string and numeral tables.

Section 5 describes functions used to input data on-screen and transfer it to the host computer via

the numeral table.

Section 6 describes basic data transfer and maintenance functions.

Section 7 describes transferring screens online to and from the host computer.

Section 8 provides troubleshooting and basic maintenance methods, including battery replacement.

Appendices of OMRON products used with PTs, PT specifications, and a memory check table are

provided at the back of the manual.

WARNING Failure to read and understand the information provided in this manual may result in

personal injury or death, damage to the product, or product failure. Please read each

section in its entirety and be sure you understand the information provided in the section

and related sections before attempting any of the procedures or operations given.

PRECAUTIONS

This section provides general precautions for using the Programmable Terminal.

The information contained in this section is important for the safe and reliable application of the Programmable Ter-

minal. You must read this section and understand the information contained before attempting to set up or operate a

Programmable Terminal.

1 Intended Audience xii...........................................................

2 General Precautions xii..........................................................

3 Safety Precautions xii...........................................................

xii

1 Intended Audience

This manual is intended for the following personnel, who must also have knowl-

edge of electrical systems (an electrical engineer or the equivalent).

•Personnel in charge of installing FA systems.

•Personnel in charge of designing FA systems.

•Personnel in charge of managing FA systems and facilities.

2 General Precautions

The user must operate the product according to the performance specifications

described in the operation manuals.

Before using the product under conditions which are not described in the manual

or applying the product to nuclear control systems, railroad systems, aviation

systems, vehicles, combustion systems, medical equipment, amusement

machines, safety equipment, and other systems, machines, and equipment that

may have a serious influence on lives and property if used improperly, consult

your OMRON representative.

Make sure that the ratings and performance characteristics of the product are

sufficient for the systems, machines, and equipment, and be sure to provide the

systems, machines, and equipment with double safety mechanisms.

This manual provides information for using the Programmable Terminal. Be sure

to read this manual before attempting to use the software and keep this manual

close at hand for reference during operation.

WARNING It is extremely important that Programmable Terminals and related devices be

used for the specified purpose and under the specified conditions, especially in

applications that can directly or indirectly affect human life. You must consult

with your OMRON representative before applying Programmable Terminals to

the abovementioned applications.

WARNING Do not use input functions such as PT touch switches for applications where

danger to human life or serious damage is possible, or for emergency switch

applications.

3 Safety Precautions

Read these safety precautions carefully and make sure you understand them

before using the Programmable Terminal so that you can use it safely and cor-

rectly.

This operation manual uses the following conventions and symbols to indicate

cautions, warnings, and dangers in order to ensure safe use of the PT. The cau-

tions, warnings, and dangers shown here contain important information related

to safety. The instructions in these cautions, warnings, and dangers must be

observed.

The conventions used and their meanings are presented below.

DANGER Indicates information that, if not heeded, is likely to result in loss of life or serious

injury.

WARNING Indicates information that, if not heeded, could possibly result in loss of life or

serious injury.

Caution Indicates information that, if not heeded, could result in relatively serious or mi-

nor injury, damage to the product, or faulty operation.

Safety Conventions and

their Meanings

Safety Precautions 3

xiii

Caution

•The ROM may be destroyed if it is mounted while power is being supplied to

the PT.

•Screen memory must be initialized before using a new PT. If the PT is used as

shipped from the factory without initialization, messages indicating errors in

the host will not be displayed.

•After the transfer has been completed, be sure to return to RUN Mode by

pressing the Buzzer Key, Up Key, and Down Key simultaneously. If the power

is turned off or if a reset is executed without having first returned to RUN Mode,

the data that has been transmitted will be corrupted. If that occurs, a message

will be displayed on the screen to indicate that the data has been corrupted.

•If a load (e.g., a buzzer or alarm light) is connected to a 10/02 Terminal or a

32/16 Terminal, it will actually operate. This can be potentially dangerous, so

exercise caution.

•The lithium battery can explode if placed into a fire, or it can explode, burn, or

leak if the + and -- terminals are short-circuited or if the battery is recharged or

dismantled. Handle the battery with care.

Safety Precautions 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Touch-Terminal Handbücher

Omron

Omron NT2S-SF121B-E - Gebrauchsanweisung

Omron

Omron Sysmac NA Series Bedienungsanleitung

Omron

Omron NA5-15W101S-V1 Bedienungsanleitung

Omron

Omron NT30C-ST141-E Bedienungsanleitung

Omron

Omron NB-series Bedienungsanleitung

Omron

Omron Programmable Terminals NT31 NT31C Benutzerhandbuch

Omron

Omron NT2S-SF122B-E START V1.03 Gebrauchsanweisung

Omron

Omron DeviceNet DRT2-AD04 Bedienungsanleitung

Omron

Omron NT600M Series Bedienungsanleitung

Omron

Omron NA-series Gebrauchsanweisung

Omron

Omron NS - Betriebsanleitung

Omron

Omron NXR-ILM08C-EIT Bedienungsanleitung

Omron

Omron NS-CXDC1-V1 Bedienungsanleitung

Omron

Omron NA-series Benutzerhandbuch

Omron

Omron NS12 Gebrauchsanweisung

Omron

Omron NS - HOST Gebrauchsanweisung

Omron

Omron NT2S-SF121B-E - Bedienungsanleitung

Omron

Omron NB-series Bedienungsanleitung

Omron

Omron DRT2 SERIES DEVICENET SLAVES - OPERATION ... Bedienungsanleitung

Omron

Omron NT20S-ST121B-EV3 Bedienungsanleitung

Omron

Omron NT21 Bedienungsanleitung

Omron

Omron NS - Gebrauchsanweisung

Omron

Omron WT30 Bedienungsanleitung

Omron

Omron NV3W Series Gebrauchsanweisung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung