Opticon CRD-3301 Bedienungsanleitung

Inhaltsverzeichnis

Andere Opticon Barcode-Lesegerät Handbücher

Opticon

Opticon OPL 7836 Bedienungsanleitung

Opticon

Opticon OPN2002 Bedienungsanleitung

Opticon

Opticon OPN2004 Benutzerhandbuch

Opticon

Opticon LH2 Bedienungsanleitung

Opticon

Opticon NFT 1125 Series Bedienungsanleitung

Opticon

Opticon OPR 3201 Bedienungsanleitung

Opticon

Opticon OPN2005 Bedienungsanleitung

Opticon

Opticon 8000 Benutzerhandbuch

Opticon

Opticon PX-25 Bedienungsanleitung

Opticon

Opticon OPI 4002 Bedienungsanleitung

Opticon

Opticon OPH 1004 Bedienungsanleitung

Opticon

Opticon MDI-4000 Series Bedienungsanleitung

Opticon

Opticon LPN5627 Bedienungsanleitung

Opticon

Opticon C 37 Bedienungsanleitung

Opticon

Opticon OPR 3101 Referenzhandbuch

Opticon

Opticon OPR 3101 Bedienungsanleitung

Opticon

Opticon OPR 3001 Bedienungsanleitung

Opticon

Opticon Code Reader 2.0 Bedienungsanleitung

Opticon

Opticon OPN2002 Gebrauchsanweisung

Opticon

Opticon NFT 1125 Series Bedienungsanleitung

Opticon

Opticon OPR 3101 Bedienungsanleitung

Opticon

Opticon NLV-3101-HD Bedienungsanleitung

Opticon

Opticon NLB-1000 Bedienungsanleitung

Opticon

Opticon OPL9813 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

GETTING STARTED

CRD-3301

6V Power input

Use the dedicated Opticon 6V/2A AC Adapter

RS232C Interface.

Use the dedicated Opticon RJ50 to DB9 cable

for the connection to a computer.

USB Interface.

For USB drivers, visit www.opticon.com/service-and-support.aspx

Search button

Press and the scanner will beep

Power LED

Comm. LED

Bluetooth LED

STEP 1 - Connect the power

Make sure that the cradle is powered with a 6V DC adapter and that the red power LED lights up.

The blue Bluetooth LED will start to flash indicating that there is no active Bluetooth connection.

STEP 4 - Make a Bluetooth connection between the scanner and the cradle.

Scan the Bluetooth address label on the bottom of the CRD-3301 cradle. The scanner will then

pair with the cradle and connect with it. Once the connection is established, the blue LED on the

cradle will light up continuously. Once the scanner is paired to the cradle the following barcodes

can be used to disconnect resp. connect the scanner to the cradle.

(Note that these are not configuration barcodes so it is not needed to scan the Start/End barcode)

_+-DISC-+_

Manual Disconnect

_+-CONN-+_

Manual Connect

_SO_

Default Bluetooth SPP

STEP 2 - Configure the scanner.

Set the OPI-3301 to default Bluetooth SPP. (This is the communication standard between

scanner and cradle; it does not define the communication standard between cradle and PC)

_ZZ_

Start

_ZZ_

End

_CNC2_

USB-HID

STEP 3 - Select and configure the interface Cradle - PC.

First select the physical interface (RS232 or USB). When RS232 is used, leave the USB port

unconnected, and then no configurations are required. For USB, you can make a choice between

USB-HID and USB-VCP. For USB-VCP there are two options: with handshaking/retries, and

without handshaking. The no handshake option is faster but less secure.

_CNPC_

USB-VCP (No Handshake)

_CNCR_

USB-VCP (Handshake and retries)

For more information about the CRD-3301, downloads and more, visit us at:

CRD-3301-QUICK START GUIDE

Before one or more configuration barcodes can be scanned, the ‘Start config’ barcode has to be

scanned. When done with the configuration, the ‘End config’ barcode has to be scanned.

www.opticonusa.com/start or

www.opticon.com/service-and-support.aspx