Oregon Scientific ZONE TRAINER SE331 Bedienungsanleitung

User Manual

Heart Rate Monitor

Zone Trainer 1.0

Model: SE331

Zone Trainer 1.0

Heart Rate Monitor

Model: SE331

USER MANUAL

CONTENTS

Control Buttons / LCD Display ....................................... 2

Starting Your Watch (First Time) .................................... 2

Navigating Through the Options.................................... 2

Key Press Prompts......................................................... 2

Tap on Lens.................................................................... 3

Modes............................................................................. 3

Set User Prole ................................................................ 3

Fitness level ................................................................... 3

Setting Mode .................................................................... 4

Wearing the Chest Belt.................................................... 5

Transmission Signal ....................................................... 6

Start Exercising................................................................ 7

Start Taking Measurements............................................ 8

Pause, Resume / Stop ................................................... 8

Understanding the Displays ........................................... 9

Normal Conditions.......................................................... 9

During Exercise .............................................................. 9

Alerts .............................................................................. 9

Understanding Heart Rate............................................. 10

Heart Rate Zones and Exercise ................................... 10

Memory ............................................................................11

Clear Records .............................................................. 12

Other Operations and Settings..................................... 12

Activate Backlight ......................................................... 12

Beep Tone On / Off....................................................... 12

Replace Battery............................................................ 12

Keypad Lock................................................................. 13

Water Resistance ........................................................... 13

Specifications................................................................. 14

Precautions .................................................................... 14

About Oregon Scientific................................................ 15

EU-Declaration of Conformity....................................... 15

CONTROL BUTTONS / LCD DISPLAY

MODE/- +/ST/SP

EL/Lock

B C D

1. : key tone deactivated

2. Time; heart rate measurements; mode banners; exercise

time / data

3. : low battery indicator

4. : key press prompt (press MODE/-)

5. :keypad locked

6. :key press prompt (press +/ST/SP)

7. Key press prompt (Tap on lens): enter sub setting

mode; conrm setting

A. EL/LOCK: Activate backlight; lock / unlock keypad

B. MODE/-: toggle between modes; exit current display and

return to previous screen; initiate search for HR signal;

decrease value of the setting; toggle setting options

C. Tap on lens: enter setting mode; conrm setting; toggle

through displays

D. +/ST/SP:start / stop stopwatch; increase value of the

setting; toggle setting options

STARTING YOUR WATCH (FIRST TIME)

Press all 3 buttons to activate watch for the rst time. The

watch will prompt you to set your user prole. (Go directly to

‘Set user prole’ section, step 4).

IMPORTANT

• To ensure accurate calculations with your exercise,

you are strongly encouraged to set the watch and user

proles before exercising.

• Remember to set the proles after every battery

replacement or reset.

NOTE When the watch is left idle for 30 seconds during

set up, it will automatically exit the setting mode and display

the time.

NAVIGATING THROUGH THE OPTIONS

KEY PRESS PROMPTS

MODE/- +/ST/SP

The watch has been

designed with prompts

to guide you through the

settings and displays.

TAP ON LENS

The tap on lens feature allows you to toggle through real

time tness data while you are exercising; review stored

data of an entire work-out session (memory mode) as well

as navigate through the settings (setting mode).

To use the tap on lens: Simply tap on the lens.

MODES

There are 4 modes. Press MODE/- to toggle through the

different modes.

MODE BANNER MAIN DISPLAY

Time

(Default

display)

Exercise

Memory

Set up

SET USER PROFILE

When prompted to set user prole

after starting the watch for the rst

time, the screen below will be shown.

Go directly to step 4.

For normal setting procedure:

1. Press MODE/- repeatedly to select “SET”, “TIME” will be

displayed shortly after.

2. Press +/ST/SP repeatedly to navigate to “USER”.

3. Tap on lens to enter user prole setting options.

4. Set user prole according to the following order: gender,

age, weight unit, weight, height unit, height, tness level,

by pressing the following buttons:

• +/ST/SP to increase value or toggle options

• MODE/- to decrease value or toggle options

• Tap on lens to conrm

“DONE” indicates user prole setting has been completed.

This is only shown when setting the watch for the rst time

or after battery reset.

FITNESS LEVEL

The tness level is based on your own self-assessment of

how t you are (depending on the amount of exercise you

regularly perform).

FITNESS

LEVEL DESCRIPTION

BEG Beginner – You do not usually participate in

programmed recreation sports or exercise.

INT

Intermediate – You are engaged in modest

physical activity (such as golng, horseback

riding, table tennis, calisthenics, bowling,

weight lifting or gymnastics) 2-3 times a

week, totaling 1 hour per week.

ATH

Athelete – You actively and regularly

participate in heavy physical exercise (such

as running, jogging, swimming, cycling, or

skipping rope) or engage in vigorous aerobic

exercise (such as tennis, basketball or

handball).

NOTE You must enter the tness level to calculate the

calories burnt.

TIP The watch generates calculations based on the

inputted data to show the calories / fat burnt and the period

exercised at the chosen intensity (target HR zone range) to

help you track your progress over time. As you progress,

update weight and tness level to help the watch give you an

up-to-date reection of your physical condition.

SETTING MODE

After setting your user prole, the “USER” screen below

will be shown. You can continue with the other settings by

pressing +/ST/SP repeatedly (see step 2 below).

However, if the user prole was set for the rst time or after

battery reset, the watch will automatically return to the

default time display. Start with step 1.

1. Press MODE/- repeatedly to select “SET”, “TIME” will be

displayed shortly after.

2. Press +/ST/SP to toggle between settings.

+/ST/SP

3. Tap on lens to enter into individual setting.

4. Start setting the selected option by pressing the following

buttons:

• +/ST/SP to increase value or toggle options

• MODE/- to decrease value or toggle options

• Tap on lens to conrm

5. Repeat steps 2-4 for all settings.

Settings Setting options (Press +/ST/SP or MODE/-

and Tap to conrm)

TIME Hour format

Hour / minute

DATE

Display format (day-month or month-day)

Year

Month

Day

USER

Gender

Age

Weight unit

Weight

Height unit

Height

Activity level

HR ZONE On / Off

HR Zone range*

TOGGLE

On/Off

(Enable display to auto toggle during

exercise )

* For further details please refer to the “Understanding Heart

Rate” section in this manual.

WEARING THE CHEST BELT

If you only wish to use the stopwatch function (and

not record any tness data), skip to ‘Start exercising’

section.

Chest belt

The chest belt counts your heartbeat and transmits this data

to the watch.

1. Wet the conductive

pads on the underside

of the chest belt with a

few drops of water or

conductive gel to ensure

solid contact.

2. Holding the elastic strap,

thread the plastic tab

through the eyelet of

the chest belt unit. Turn

it slightly and snap into

place.

3. Place the heart rate chest

belt slightly below your

chest and wrap the strap

around your chest. Pass

the other tab through the

remaining eyelet and

snap into place.

To ensure an accurate heart

rate signal, adjust the strap

until the belt sits snugly below

your pectoral muscles.

TIPS

• The position of the chest belt affects its performance.

• In dry, cold climates, it may take several minutes for the

chest belt to function steadily. This is normal and should

improve with several minutes of exercise.

NOTE To maintain the best performance of your chest belt,

please handle it with care according to the following:

• Do not wrap the chest belt in a wet towel nor with other

wet materials.

• Do not store the chest belt in a hot (about 50°C) and

humid (about 90%) environment.

• Do not place or wash the chest belt under running water,

instead clean it with a wet cloth.

• Do not place the conductive rubber face down on a

metal table or surface.

• Properly dry the chest belt immediately after use.

TRANSMISSION SIGNAL

The heart rate chest belt and watch have a maximum

transmission range of about 62.5 centimeters. They are

equipped with the latest digital coding system to reduce

signal interference from the environment, as well as analog

technology.

Search for heart rate signal:

• Press MODE/- to select “EXE”, “HR BELT” will be

displayed shortly after to indicate system is searching

for chest belt signal.

NOTE Whenever the watch is searching for the chest belt

signal (manual or automatic search), make sure that the

chest belt is no further than 10 cm from the watch.

Your watch will advise you which system it is using and the

signal status by displaying the following icons:

Icon Description

Searching for a

signal

(Press +/ST/SP

to skip search

and only use

stopwatch

function)

A signal has

been found and

the digital system

is being used

A signal has been

found and the

analog system is

being used

(no symbol)

No signal has

been found

Signal unsuccessful?

The signal search will take approximately 30 seconds. If

after 30 seconds the “NO HR BELT” is displayed, then your

signal search has been unsuccessful. You can either:

1. Press +/ST/SP and proceed to use the watch as a

stopwatch (without exercise recording function); or

2. Press MODE/- to force another signal search.

Analog or Digital?

The digital signal is less susceptible to signal interference

and is suitable in crowded areas or where there are other

monitors / equipment. You should only switch to the analog

transmission signal if the situation in point 2 occurs (see

‘Encountering difculties?’ below).

To switch from digital to analog or

analog to digital system:

1. Press the chest belt button for

more than 6 seconds.

2. Press and hold MODE/- on the

watch to force a signal search.

Encountering difculties?

In the event that you experience a weak signal or your signal

is disrupted by interference in the environment, follow the

instructions below to identify and resolve the situation.

1. The signal is weak - the watch may only show “--”:

• Shorten the distance between the heart rate chest

belt and watch.

• Re-adjust the position of the heart rate chest belt.

• Check the conductive pads are moist enough to

ensure solid contact.

• Check the batteries. If they are low or exhausted, the

transmission range may be shortened.

• Press and hold MODE/- to force a signal search.

2. The gym equipment does not seem to work with your

chest belt and the digital icon is displayed:

• Most gym equipment is compatible with the analog

system . Press and hold the chest belt button

for more than 6 seconds to change from digital to

analog. Then press and hold MODE/- to force a

signal search.

3. Interference from another person’s heart rate monitor -

their heart rate readings appear on your watch, or the

readings may uctuate:

• Force another signal search by pressing the chest

belt button then press and hold MODE/- on the

watch. Do not press and hold the chest belt button,

as it will change the transmission signal from digital

to analog.

4. The signal is jammed - “NO HR BELT” appears on the

display after several tries:

• There is too much interference in the environment

for your heart rate monitor to function. Move to an

area where the watch can register your heart rate

reading.

WARNING Signal interference in the environment can be

caused by electromagnetic disturbances. These may occur

near high voltage power lines, trafc lights, overhead lines

of electric railways, electric bus lines or trams, televisions,

car motors, bike computers, some motor driven exercise

equipment, cellular phones or when you walk through

electric security gates. Under interference, the heart rate

reading may become unstable and inaccurate.

START EXERCISING

If you wish to receive comprehensive calculations (such as

your heart rate and the calories / fat burnt) for an exercise

session, before you start, allow the watch a few seconds

to search for chest belt rst. For detailed information or

if encountering difculties, refer to “Transmission signal”

section above.

START TAKING MEASUREMENTS

If using only the stopwatch function:

1. Press MODE/- to select “EXE”, “HR BELT” will be

displayed shortly after to indicate system is searching

for chest belt signal.

2. Press +/ST/SP twice to skip heart rate signal search and

start stopwatch.

MODE/-

+/ST/SP

START

+/ST/SP

If using chest belt to receive and record tness data:

1. Press MODE/- to select “EXE”, “HR BELT” will be

displayed shortly after to indicate system is searching

for chest belt signal. Watch will display system used

(analog / digital), then the stopwatch screen.

2. Press +/ST/SP to start stopwatch.

MODE/-

+/ST/SP

START

TIP You can view the time while exercising. Press MODE/-

to view time. To return, press MODE/- again.

PAUSE, RESUME / STOP

If you need to take a break during exercise, press +/ST/SP.

When ready, press +/ST/SP to resume exercise.

To stop exercise and save data: Press +/ST/SP to pause,

then press MODE/-.

After a long pause, the watch will time out and automatically

save the data.

UNDERSTANDING THE DISPLAYS

NORMAL CONDITIONS

To view total calories burnt since last reset: tap on lens

when screen shows default time display.

Tap

DURING EXERCISE

To toggle between displays during exercise: tap on

lens.

TIP If ‘Toggle’ function has been enabled (refer to “Setting

mode” section), the below 4 screens will automatically

toggle.

Exercise time

Current heart rate

Calories burnt (kcal)

Fat burnt (g)

ALERTS

This watch

enables you

to select a

target HR zone

according to your

tness goals. By

setting the target HR zone and personal data, the watch can

monitor how well you do. The watch will send out visual and

audible alerts if you are pushing yourself too hard or need

to put more effort in.

For details of HR zones, refer to “Understanding heart rate”

section in this manual.

If alert has been enabled and heart rate zone has been set:

ICON BEEP(S) DESCRIPTION

/ ABOVE

ZONE! 2You have gone above your

upper HR limit

/ BELOW

ZONE! 1You have gone below your

lower HR limit

Andere Handbücher für ZONE TRAINER SE331

Inhaltsverzeichnis

Sprachen:

Andere Oregon Scientific Herzfrequenzmonitor Handbücher

Oregon Scientific

Oregon Scientific SE211 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Tap On Sport SE102N Bedienungsanleitung

Oregon Scientific

Oregon Scientific IHM80004 Bedienungsanleitung

Oregon Scientific

Oregon Scientific HR102 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Tap On Sport SE102N Bedienungsanleitung

Oregon Scientific

Oregon Scientific AH300 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE128 Bedienungsanleitung

Oregon Scientific

Oregon Scientific HR102 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SH201 Bedienungsanleitung

Oregon Scientific

Oregon Scientific AH300 Bedienungsanleitung

Oregon Scientific

Oregon Scientific HR102 Bedienungsanleitung

Oregon Scientific

Oregon Scientific VIBRA Trainer Elite SE212 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE300 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE112 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SmartHeart SE102L Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE336 Bedienungsanleitung

Oregon Scientific

Oregon Scientific OUTBREAKER PRO Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE338 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE138 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Smartsync WM100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE188 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SE139 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SmartHeart SE102 Bedienungsanleitung

Beliebte Herzfrequenzmonitor Handbücher anderer Marken

Sportline

Sportline SOLO 915 Bedienungsanleitung

Sportline

Sportline Solo 920 Bedienungsanleitung

Crane

Crane D02J56 Bedienungsanleitung

Mio

Mio ALPHA Bedienungsanleitung

O-Synce

O-Synce MIXfree Bedienungsanleitung

New Balance

New Balance NX 710 CardioTRNR Bedienungsanleitung

Sportline

Sportline 905 Bedienungsanleitung

Acumen

Acumen BASIX Bedienungsanleitung

Tanita

Tanita AM-160 Bedienungsanleitung

Mocacare

Mocacare MOCAheart Bedienungsanleitung

Datel

Datel Go-tcha Evolve for Pokémon Go Bedienungsanleitung

ItsImagical

ItsImagical PRO SPORT SMART BAND Bedienungsanleitung

Polar Electro

Polar Electro RCX5 Bedienungsanleitung

NAV

NAV Master II Bedienungsanleitung

JUNSD

JUNSD JS-702 Bedienungsanleitung

Polar Electro

Polar Electro E40 Bedienungsanleitung

Texas Instruments

Texas Instruments TI Designs Service-Handbuch

chinavasion

chinavasion CVSB-G444 Bedienungsanleitung