OzSpy DVR Bedienungsanleitung

OzSpy AHD DVR User Manual

OzSpy

DVR Manual

OzSpy AHD DVR User Manual

This product is designed especially for the security and surveillance field and is an

outstanding digital surveillance product. It introduces embedded LINUX operating system which

is more stable. It also introduces standard H.264mp video compressed format and G.711A

audio compressed format which insures the high quality image and low error coding ratio.

Strong network services greatly enhance the network data transmission capacity and remote

control capabilities.

The First Part: Basic Operation

1 Basic Installation

1.1 Hard Disk Installation

For the first use please install the hard disk.

Full Function series DVR supports 2 Sata hard disks, the Simple Function series DVR

supports 1 Sata hard disk.

Note: DVR can run and monitor normally without hard disk, it can’t record and playback.

1.2 Mouse Connection

Full Function series DVR has 1 USB connection on the back panel and 1 USB connection on the

front panel, the 2 USB connections could be used for mouse, USB stick, 3G&WIFI module, portable

HDD and USB DVR-RW.

Simple Function series has two USB connections on the back panel for mouse and USB stick.

2 Turn on

Plug the power lead in and turn on the power supply switch. When the DVR is turned on

the power supply indicator light will come on. After starting up, you will hear a beep, the

default setting of video output is multiple-window mode.

OzSpy AHD DVR User Manual

Note: Restarting the DVR after abnormal power off, the DVR will automatically recover

the state before power off.

3 Turn off

There are two methods to turn off the DVR which are soft switch and hard switch. Entering

[Main menu] and choosing [Logout] in the [turn off the system] option is called soft switch.

Turning off at the power supply switch is called hard switch.

Note: The settings must be saved before replacing the battery otherwise the information

will be lost.

4 Login

When the DVR boots up, user must login and the system provides the corresponding

functions with the user purview. There are two user settings which are admin, and guest; and

they have no passwords. “Admin” is the super user purview; “Guest” is the common user

purview.

Password protection: If the password is continuously wrong three

times, the alarm will start. If the password is continuously wrong five

times, the account will be locked. (Through reboot or after half an hour,

the account will be unlocked automatically).

For your system security, please modify your password after first login.

5 Preview Picture1. Login

The system date, time and channel name are shown in each viewing window. The

surveillance video and the alarm status are shown in each window.

Recording

status

Video loss

OzSpy AHD DVR User Manual

Motion

detect

Camera

lock

Table1 Preview icon

6 Recording Config

Set the recording parameters in the surveillance channel. You can enter [Main Menu]>

[Record]> [Record Config] to set. The system’s default setting is 24 hours continuous

recording.

Note: There is at least one read-write hard disk if the DVR records normally.

Picture 2

Channel - Choose the corresponding channel number to set the channel. Choose the “all”

option to set all channels.

Redundancy - Choose the recording file and backup in two hard disks. The first one is read-

write disk, the other is redundant disk.

Length - Set the time length of each video file. 60minutes is default length.

PreRec - Record 1-30 seconds before the action. (file length is decided by the code stream)

Schedule - Record according to the set video type (regular, detect and alarm) and time section.

Manual - Click the “all” button and the corresponding channel will record no matter what state

it is in.

Stop - Click the “stop” button to stop the recording in any state.

OzSpy AHD DVR User Manual

Period - Set the time for recording, the recording will start only in the set range.

Recording Type: regular, detection or alarm.

Regular - Perform regular recording in the set time section. The video file type is “R”.

Detect - Select the “Detect “to start the motion detection recording. The video file type is

“M”.

Alarm - Select “Alarm” to activate the external alarm when the motion detect has been

activated during the set time selection. The video file type is “A”.

7.Snapshot Storage. (partial devices supported)

Setup snapshot parameters for different channels. First time it's set for 24hours snapshot

continuously, please go to Main Menu->Record->Snapshot Storage for appropriate settings.

Note: If normal snapshot storage, please setup Snap at Main Menu->Advanced->HDD

Manage->Snapshot.

Picture3 Snapshot Storage

8 Video Playback

There are two methods for you to play the video files on the hard disk.

1. In the desktop shortcut menu.

OzSpy AHD DVR User Manual

2. Main Menu>Record>Playback.

Note: The hard disk that saves the video files must be set as read-write or read-only

state.

Picture4 Video Playback

Picture’s 3 and 4.

1.Playback control 2. Operating Tips 3. Record type

4.Time progress bar options 5. Switching time or file mode

6.File Search 7. Channel option 8. Date option 9. Storage Device option 10. File information 11.

File Option 12. Time

OzSpy AHD DVR User Manual

【File information】Start time, end time and size.

【File option】Choose the file to playback/backup.

【playback control】Refer to the following sheet for more information.

Table2 Playback control key

Note: Frame by frame playback is only performed in the "pause" playback state.

Special functions:

Partial enlarged: single pictures full-screen playback, can use the left mouse button to choose

any size area on the screen, click the left mouse button, the selected area will enlarge the

regional image, double click the left mouse button to exit the partial enlarged images.

Note: If the current resolution of one channel is beyond maximum resolution, it will be

displayed as a red “X” when playback.

9 Network Setup

Picture5 Network Setup

Doing network setup through Main Menu>System>Network

【IP address Set the IP address. Default: 192.168.1.10.

OzSpy AHD DVR User Manual

【Subnet Mask Set the subnet mask code.

Default: 255.255.255.0.

【Gateway Set the default gateway. Default: 192.168.1.1.

Make the equipment’s IP address and the router in the same network segment. For example,

the router IP address is 192.168.1.1, and the subnet mask is 255.255.255.0. According to the

default setup, generally the default gateway is the router IP address.

10. Alarm Setup

Picture 6 Motion Detection

Motion detection setup- Set DVR equipment making it alarm, linkage record and make the PTZ

turn to preset position when there is a moving object in designated areas during Monday to

Friday.

Step1. Choose [Main Menu】>【Alarm】>【Motion Detect】，then enter the setup

interface;

OzSpy AHD DVR User Manual

Step2. Choose one channel and adjust sensitivity level, then set the time period of alarm

surveillance. Set the monitor area (click the “set” button, choose the areas you want, and the

“default” means choose all areas, then rig click to choose "up window".

Step3. When in alarm state, the DVR can take linkage measures. Alarm output, recording,

tour, PTZ activation, snapshot, show message, sending email and buzzer.

Step4. Set other channels alarm parameter following step 2 and step 3.

Note: video block, video loss and alarm input’s setup method are similar with motion

detection.

OzSpy AHD DVR User Manual

10 PTZ Control

Step1. Set basic parameter such as channel and protocol. 【Main Menu】>【System】> 【PTZ

Config】

Step2. At the state of menu preview, enter the PTZ operation menu.

Step3.One method is "right click" mouse, choose the “PTZ control” and you can then control

PTZ general operation. The other method is "right click" mouse, choose “High Speed PTZ”.

Control the left button and move it to control the PTZ direction directly. Use the mouse wheel

to zoom in/out the controlled camera.

The Second Part: Remote Control

1 Network Connection

Before web operation, you need to connect the equipment with the internet.

Step1.Connect the equipment with the internet correctly.

Step2.Set LAN following step 9 details- Network Setup in reference manuals first part.

Step3.when Lan is connected, it needs to set up port mapping for public network access.

Step4.DDNS Application.You can apply for DDNS in the http://www.3322.org/ and

http://www.oray.com/

Step5.DDNS Setup.Make sure to fill the right info in the Main Menu->System->NetService-

>DDNS

Note: The device must be in the same network with PC, if cannot connect,

please check the device IP if it works fine.

Inhaltsverzeichnis

Andere OzSpy DVR Handbücher

OzSpy

OzSpy AF-MQU350 Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung