Panasonic AG-CPD20P Bedienungsanleitung

Model No. AG-CPD20P

Operating Instructions

S0909K0 -M

Printed in Japan

ENGLISH

VQT2C58

Memory Card Video Recorder

Before operating this product, please read the instructions carefully and

save this manual for future use.

Car Use only

Manuals for this recorder are prepared in two parts.

Section 1 : Before Use (This Manual)

Section 2 : Operation (for operations using the remote

control panel, etc.) (PDF)

Section 1 : Before Use

WARNING:

• To reduce the risk of fire or electric shock, do not expose this

equipment to rain or moisture.

•To reduce the risk of fire or electric shock, keep this equipment

away from all liquids. Use and store only in locations which are

not exposed to the risk of dripping or splashing liquids, and do not

place any liquid containers on top of the equipment.

CAUTION:

To reduce the risk of fire or electric shock and annoying

interference, use the recommended accessories only.

indicates safety information.

Read this first!

WARNING:

Always keep memory cards (optional accessory) out of the reach of

babies and small children.

Read this first! (continued)

indicates safety information.

CAUTION:

In order to maintain adequate ventilation, do not install or place this

unit in a book case, built-in cabinet or any other confined space.

To prevent risk of electric shock or fire hazard due to overheating,

ensure that curtains and any other materials do not obstruct the

ventilation.

FCC Note:

This equipment has been tested and found to comply with the limits

for a class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Warning: To assure continued FCC emission limit compliance, the user

must only use shielded interface cables when connecting to external

units. Also, any unauthorized changes or modifications to this equipment

could void the user’s authority to operate it.

• This recorder is designed for use and installation in a vehicle.

For example, it may be mounted on the center console or in the trunk.

• The installation of this equipment must only be performed by a

professional installer.

• The rating plate is on the underside of the unit.

CAUTION:

To reduce the risk of fire, the red (BATT) and white (SIGNAL) wires

of the power cable must be connected via fuses (7.5 A) having UL

Listing.

IMPORTANT SAFETY INSTRUCTIONS

(1) Read these instructions.

(2) Keep these instructions.

(3) Heed all warnings.

(4) Follow all instructions.

(5) Do not use this equipment near water.

(6) Clean only with a dry cloth.

(7) Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

(8) Do not install near any heat sources such as radiators, heat registers, stoves, or

any other equipment (including amplifiers) that produce heat.

(9) Only use attachments/accessories specified by the manufacturer, and as

outlined in this manual.

(10) Refer all servicing requests to qualified service personnel. Servicing is required

when the equipment has been damaged in any way, such as damage to the

power supply cord or plug, liquid being spilled on or objects have fallen into the

equipment, the equipment has been exposed to rain or moisture and does not

operate normally, or has been dropped.

Contents

SDHC Memory Card Insertion and

Removal...........................................18

Inserting an SDHC Memory Card

....18

Removing an SDHC Memory Card

...19

Turning the Recorder On and Off

...20

On ..................................................20

Off..................................................20

Connector Signals..........................21

Specifications.................................24

Read this first! ..................................2

IMPORTANT SAFETY INSTRUCTIONS

...4

Functions of This Recorder.............6

Included Accessories.......................7

Options..............................................7

About Manuals of This Recorder....7

Before Use.........................................8

Notes on Handling..........................10

Control Reference Guide...............11

Connections....................................16

lnformation on software for this product

•

Included with this product is software licensed under the GNU General Public License (GPL)

and GNU Lesser General Public License (LGPL), and users are hereby informed that they

have the right to obtain, change and redistribute the source codes of this software. Details

on GPL and LGPL can be found in the GPL and LGPL sections of the Operating Instructions:

Section 2.

To obtain the source codes, go to the following home page.

https://eww.pavc.panasonic.co.jp/pro-av/

The manufacturer asks users to refrain from directing inquiries concerning the source

codes they have obtained and other details to its representatives.

• Included with this product is software licensed under the OpenSSL License. Details on

the OpenSSL License can be found in the OpenSSL License section of the Operating

Instructions: Section 2.

• Included with this product is software licensed under the Blowfish License. Details on

the Blowfish License can be found in the Blowfish License section of the Operating

Instructions: Section 2.

• Included with this product is software licensed under the DES License. Details on the

DES License can be found in the DES License section of the Operating Instructions:

Section 2.

•

Included with this product is software licensed under the X.Org License.

Details on the X.Org License can be found in the X.Org License section of the Operating

Instructions: Section 2.

• Included with this product is software licensed under the Ralink firmware License.

Details on the Ralink firmware License can be found in the Ralink firmware License

section of the Operating Instructions: Section 2.

• For information on other licensed software included with this product and their license

conditions, go to the following home page.

https://eww.pavc.panasonic.co.jp/pro-av/

• This product is licensed under the AVC Patent Portfolio License for the personal and

noncommercial use of a consumer, and no license is granted or shall be implied for any

use other than the personal uses detailed below.

– To encode video in compliance with the AVC standard (“AVC Video”)

– To decode AVC Video that was encoded by a consumer engaged in a personal and

noncommercial activity

– To decode AVC Video that was obtained from a video provider licensed to provide

AVC Video

• Additional information may be obtained from MPEG LA, LLC (http://www.mpegla.com).

– Separate license contracts must be obtained from MPEG LA where SD Memory

Cards containing information recorded with this product are to be distributed to end

users for commercial purposes.

“End user” refers to persons or organizations handling such contents for personal use.

Wireless LAN

(commercially available)

Functions of This Recorder

An AG-CPD20P is a vehicle video recorder using SDHC Memory Cards.

A separately sold video camera, commercially available radar gun, and microphones

can be connected to the recorder. The recorder can be controlled using a separately

sold remote control panel, or software installed on a personal computer.

Rader Gun

(commercially available)

→page 17

SDHC Memory Cards

(sold separately)

Up to four SDHC Memory Cards

can be inserted in this recorder for

recording. Video and audio signals

are recorded on SDHC Memory

Cards. In addition, meta-data

such as recording date and time,

recording trigger, etc. can also be

recorded.

→page 8, 10 and 18-19

Audio input

Four audio input connectors

enable recording of up to

four-channel microphone or

line signals.

→page 17

Camera

Up to six cameras can

be connected, and pictures

captured by five of them can be

recorded as one- or two-window

pictures simultaneously.

(

with a separately sold color

camera and five commercially

available cameras.

)

→page 17

Remote control panel

RETURN

CONTROL PANEL

ON/

OFF

(sold separately)

This panel controls the recorder.

The picture is displayed on the LCD.

→page 17

• For details on operation, refer to “Section

2: Operation.”

Front End Application

This is free application software for

operating the recorder, playing back

pictures, uploading recorded data, etc.

• For details, refer to the Operating

Instructions for Front End

Application.

Back End Application

This is free application software

for server. Playback of pictures,

editing, searching for data and user

management, etc. are available.

• For details, refer to the Operating

Instructions for Back End Application.

Wired LAN

(commercially available)

Wired LAN/

USB wireless

LAN module

(commercially

available)

Key .....................................................2

Remote Control Panel

(AG-RCP30P)

Color Camera (AG-CK10P)

Cable Kit (AG-CR13P)

Power cable

Trigger cable

GPS antenna + Antenna mounting

plate

PC Applications (free software)

Front End Application

(AG-JJLFE20P)

Back End Application

(AG-JJLBE20P)

Options

Included Accessories

Manuals for this recorder are prepared in two parts: “Section 1: Before Use” (this

manual) and “Section 2: Operation” (PDF manual).

Section 1: Before Use (This Manual)

Section 2: Operation (for operations using the remote control panel, etc.) (PDF)

Definition of terms

Officer: anybody using the Remote Control Panel, Front End Applications,

or Back End Application to control the recorder

Administrator: a user with administrator privileges to collect and manage Memory

Card Recorder data

Figures in this manual

Figures for the main unit and display on the menu screen may differ from the

actual product.

About Manuals of This Recorder

Before Use

• In no event will Panasonic be liable for any damages, including any incidental

or consequential damages, stemming from a failure to record data or from lost

settings or data.

Any of the following actions can result in problems:

• Power supply to the recorder is interrupted or impaired during recording, for

example by starting an engine.

•

If an SDHC Memory Card is ejected while it is being accessed (for example

during recording).

Always take a trial shoot.

Before making important recordings,

always take a trial shoot to confirm

that recording works as expected.

Especially when using “Backlighting

Compensation” or “Night Shooting

with the IR Function”, verify that your

settings produce the desired results.

When using for the first time

or when using in a place with

a different time zone, set the

correct time zone.

The factory default time zone setting

is “Eastern DST”.

When using in a different time zone,

set the time zone for that region

(refer to “TimeZone” in Section 2:

Operation).

Recording officer data on this

unit allows you to find out the

person performed recording

later (refer to “Setting up/Deleting

Officer Data” in Section 2: Operation).

Use together with the Remote

Control Panel and other

specified, separately sold

accessories.

This unit can be controlled by

application software running on

a Remote Control Panel or a PC

(referred to as PC application in

this manual).

•

For details on how to run the PC

application, see the Operating

Instructions of the PC application.

• Connecting a personal computer

(referred to as PC in this manual)

to this unit and starting up Front

End application on the PC freezes

this unit in the live screen and

disables the other operations.

Usable memory cards

The recorder is recommended to

use an SDHC Memory Card (16 GB

or 32 GB) having “SDHC” logo,

made by Panasonic, and conforming

to Class 6 or Class 10 of SD speed

class.

Do not turn the power off while

recording.

Be sure to stop all operations

before turning the power off (refer to

“Stopping Recording” in Section 2:

Operation).

Turning the power off especially

during access (for example,

during recording) may damage the

SDHC Memory Card or corrupt

file management data, setting

information and other data on

the SDHC Memory Card. If file

data cannot be read correctly due

to corrupted file management

information on the SDHC

Memory Card, the card should

be reformatted. For details on

reformatting, refer to “Format” in

Section 2: Operation or contact your

supplier.

Before Use (continued)

About the Internal Clock

Confirming the Time

The internal clock is set at the time

of factory default. Check the time

before using, and reset the clock if

necessary. (Refer to “Date/Time” in

Section 2: Operation.)

Note:

To use GPS, connect the

GPS antenna (included in the

separately sold Cable Kit) to the

[GPS ANT.] connector on the rear

panel.

Consult your supplier and request

connection.

During GPS reception, the

signals received will regularly and

automatically set the recorder

clock to GPS time.

Time Zone Setting

The factory default time zone setting

is “Eastern DST”.

When using in a different time zone,

set the time zone for your region.

(Refer to “TimeZone” in Section 2:

Operation.)

Notes on Handling

Usage

• Do not remove an SDHC Memory

Card while it is being accessed, as

the SDHC Memory Card may be

damaged or the SDHC Memory

Card slot may become disabled.

• Do not set liquid containers or

small metal objects on the recorder

or SDHC Memory Cards.

• Do not insert foreign objects into

the openings of any devices.

• Do not attempt to modify the

recorder or SDHC Memory Cards.

•

Do not use the recorder in a place

where it or an SDHC Memory Card

might get wet, or water might get

inside them.

• The recorder is intended to work

only with SDHC Memory Cards.

Do not attempt to use non-SDHC

Memory Cards, as that could

damage the recorder.

• When inserting an SDHC Memory

Card, make certain that it is not

upside down or backwards, and

do not attempt to force a bent or

damaged SDHC Memory Card,

as that could damage the card or

SDHC Memory Card slot.

• While the recorder is operating

(and especially recording), do

not disconnect the recorder’s

power cable (included in the

separately sold Cable Kit). Before

disconnecting the power cable,

first stop all operations and turn

the recorder off. Otherwise, the

SDHC Memory Card may be

damaged, or recorder setting files

or management data on the SDHC

Memory Card may be corrupted.

Maintenance

• To clean the recorder, turn the

vehicle’s ignition switch to the

LOCK (OFF) position, and keep the

recorder power turned off (see “Off”

on page 20).

• Do not use solvents such as

benzene, thinner or alcohol, as

these can deform the case or

damage the surface finish.

• Use a soft, dry cloth to dust off the

recorder. If severely soiled, wipe it

with a cloth moistened with a weak

solution of mild synthetic detergent

and wrung out, and afterwards

wipe with a dry cloth.

• If using a chemically treated cloth,

follow the instructions provided

with it.

Precautions for use of SDHC

Memory Cards

• If an SDHC Memory Card that has

been used with another device is

to be used, format it with the “SD

Memory Card Formatting Software”

which can be downloaded from the

following Web site:

http://panasonic.jp/support/global/

cs/sd/download/sd_formatter.html

(Refer to “Format” in Section 2:

Operation.)

• Since the number of recording

files on an SDHC Memory Card is

limited, exceeding the maximum

number of recording files will detect

an end of card event even if there is

space left on the card.

Andere Handbücher für AG-CPD20P

Inhaltsverzeichnis

Andere Panasonic DVR Handbücher

Panasonic

Panasonic DMR-ES20EG Bedienungsanleitung

Panasonic

Panasonic SP-DR04 Bedienungsanleitung

Panasonic

Panasonic WJ-HD616/1000 Bedienungsanleitung

Panasonic

Panasonic DMR-E85HEE Bedienungsanleitung

Panasonic

Panasonic ShowStopper PV-HS1000 Bedienungsanleitung

Panasonic

Panasonic DMR-E30 Bedienungsanleitung

Panasonic

Panasonic DMR-E50K Bedienungsanleitung

Panasonic

Panasonic DMR-E55S Bedienungsanleitung

Panasonic

Panasonic AG-CPDIOCRUP Bedienungsanleitung

Panasonic

Panasonic DMR-E53EG, DMR-E55EB, DMR-E55E Bedienungsanleitung

Panasonic

Panasonic WJ-NV200VK Bedienungsanleitung

Panasonic

Panasonic DMR-E65S - DVD Recorder With SD Card Slot Bedienungsanleitung

Panasonic

Panasonic DMR-E60PP Bedienungsanleitung

Panasonic

Panasonic WJND400 - NETWORK DISK RECORDER Bedienungsanleitung

Panasonic

Panasonic WJ-GXD400 Bedienungsanleitung

Panasonic

Panasonic DMR-HW220DMR-HW220 Bedienungsanleitung

Panasonic

Panasonic WJ-NV200K Bedienungsanleitung

Panasonic

Panasonic DMR-E500HS Bedienungsanleitung

Panasonic

Panasonic DMRE20 - DVD VIDEO RECORDER Bedienungsanleitung

Panasonic

Panasonic WJ-HD616/1000 Bedienungsanleitung

Panasonic

Panasonic DMR-E500HS Bedienungsanleitung

Panasonic

Panasonic DMR-ES35VEG Bedienungsanleitung

Panasonic

Panasonic Showstopper PV-HS2000 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-E60 Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung