Panasonic KX-HDV430 Betriebsanleitung

Document Version 2016-11

Model No.

SIP Phone

KX-HDV430

Supplement for Administrator Guide

Please use this supplement manual together

with the latest English Administrator Guide.

1. Additional Information for Specifying the Server Address

1.1 Basic format

Format: <scheme>://<user>:<password>@<host>:<port>/<url-path>/<file name>

　　* The server name (<host>) may be the IP address or the domain.

　　* Maximum length: 384 characters

1.2 Macros used with file names

Macro Format {XXXX} Macro Expansion

{MAC}

If the URL contains {MAC}, it will be replaced with the

device’s MAC address in uppercase letters.

Example: {MAC} → 0080F0C571EB

{mac}

If the URL contains {mac}, it will be replaced with the

device’s MAC address in lowercase letters.

Example: {mac} → 0080f0c571eb

{MODEL}

If the URL contains {MODEL}, it will be replaced with

the device’s model name.

Example: {MODEL} → KX-HDV430

{fwver}

If the URL contains {fwver}, it will be replaced with the

device’s firmware version.

Example: {fwver} → 01.000

Note

• Macros distinguish between uppercase and lowercase letters.

• Macros not specified above will be treated as strings of characters.

1.3 Target WEB Settings/Configuration Parameters

WEB Setting Configuration Parameter

DHCP Host Name DHCP_HOST_NAME

Standard File URL CFG_STANDARD_FILE_PATH

Product File URL CFG_PRODUCT_FILE_PATH

Master File URL CFG_MASTER_FILE_PATH

- CFG_ROOT_CERTIFICATE_PATH

- CFG_CLIENT_CERT_PATH

- CFG_PKEY_PATH

Firmware File URL FIRM_FILE_PATH

HTTP User Agent HTTP_USER_AGENT

-XMPP_ROOT_CERT_PATH

-XMPP_CLIENT_CERT_PATH

-XMPP_PKEY_PATH

-LDAP_ROOT_CERT_PATH

-LDAP_CLIENT_CERT_PATH

-LDAP_PKEY_PATH

-LANGUAGE_PATHx

-WEB_LANGUAGE_PATHx

User Agent SIP_USER_AGENT

-SIP_TLS_ROOT_CERT_PATH

-SIP_TLS_CLIENT_CERT_PATH

-SIP_TLS_PKEY_PATH

-POWER_ON_DISPLAY_LOGO_PATH

2. Additional Information for Specifying the LDAP Server

Add "ldap://"or "ldaps://" before the LDAP server address.

(Example) LDAP_SERVER="ldap://141.170.10.178"

KX‐HDV430SoftwareFileVersion02.100orlater

1. 4.2.2 Network Status

Change the followings in " Setting Mode " on page 61.

(Before)

Value Range

(After)

Value Range

2. 4.3.2 Ethernet Port Settings

Add the following WEB setting.

Enable CDP

Description

Value Range

Default Value

Configuration File Reference

Packet Interval

Description

Value Range

Default Value

Configuration File Reference

3. 4.6.1 Call Control

Add the following WEB setting.

Group Call Pickup

Description

Value Range

Default Value

Configuration File Reference

Barge in

Description

Value Range

Default Value

Configuration File Reference

Specifies the feature number for performing group call pickup.

0–4 digits (0–9, *, #)

Not stored.

NUM_PLAN_PICKUP_GROUP

Specifies the feature number for performing barging in.

0–4 digits (0–9, *, #)

Specifies the interval, in seconds, between sending CDP frames.

1 - 3600

CDP_INTERVAL

• Disable

• LLDP

• Manual

• Disable

• LLDP

• CDP

• LLDP/CDP

• Manual

Selects whether to enable the CDP feature.

・Yes

・No

CDP_ENABLE

Not stored.

NUM_PLAN_BARGE_IN

Private Hold

Description

Value Range

Default Value

Configuration File Reference

4. 4.6.4 Flexible Key Settings (No. 1–24)

Change the followings in " Type" on page 129.

(Before)

Value Range

(After)

Value Range

• One Touch Dial

• BLF

• Line

• ACD

• Wrap Up

• Line Status

• Call Forward

• Phonebook

• Call History

• Simultaneous Ring

• Hoteling (Hospitality)

• Transfer

• Blind Transfer

• Conference

• Directed Call Pickup

• Call Park

• Call Park Retrieve

・Network Camera

• One Touch Dial

• BLF

• Line

• ACD

• Wrap Up

• Line Status

• Call Forward

• Phonebook

• Call History

• Simultaneous Ring

• Hoteling (Hospitality)

• Transfer

• Blind Transfer

• Conference

• Directed Call Pickup

• Call Park

• Call Park Retrieve

・Group Call Pickup

・Network Camera

Selects whether to enable or disable private hold.

・Yes

・No

PRIVATE_HOLD_ENABLE

5. 4.6.9 DSS Console

Change the followings in " Type" on page 141.

(Before)

Value Range

(After)

Value Range

• One Touch Dial

• BLF

• Line

• ACD

• Wrap Up

• Line Status

• Call Forward

• Phonebook

• Call History

• Simultaneous Ring

• Hoteling (Hospitality)

• Transfer

• Blind Transfer

• Conference

• Directed Call Pickup

• Call Park

• Call Park Retrieve

・Network Camera

• One Touch Dial

• BLF

• Line

• ACD

• Wrap Up

• Line Status

• Call Forward

• Phonebook

• Call History

• Simultaneous Ring

• Hoteling (Hospitality)

• Transfer

• Blind Transfer

• Conference

• Directed Call Pickup

• Call Park

• Call Park Retrieve

・Group Call Pickup

・Network Camera

6. 5.3.1 System Settings

Add the following configuration parameter.

AUTO_INPUT_KEY_TIME

Value Format

Description

Value Range

Default Value

START_DIAL_POUND_KEY

Value Format

Description

Value Range

Default Value

CALL_SETTINGS_MENU_ENABLE

Value Format

Description

Value Range

Default Value

LCD_SCREEN_TIMEOUT

Value Format

Description

Value Range

Default Value

LCD_ACTIVE_LEVEL

Value Format

Description

Value Range

Default Value

INTEGER

Specifies the length of time before the LCD backlight turns off when the unit is

idle.

・0: 30sec

・1: 1min

・2: 5min

・3: 10min

・4: 30min

・5: 60min

・6: 120min

・7: 180min

・8: 300min

・9: Always On

INTEGER

0–8

Specifies the backlight level of the LCD when it is active.

BOOLEAN

Specifies whether the "Call Settings" setting is displayed in MENU.

・Y: Displayed

・N: Not displayed

INTEGER

Specifies the number of seconds after which the cursor automatically moves

to the next position during character input.

0–3

[0: off]

BOOLEAN

Specifies whether to send the dialed number when the '#' key is pressed

during pre-dialing.

・Y: Enable dialing by using '#'

・N: Disable

LCD_INACTIVE_LEVEL

Value Format

Description

Value Range

Default Value

DSS_LCD_ACTIVATION

Value Format

Description

Value Range

Default Value

DSS_LCD_BACKLIGHT

Value Format

Description

Value Range

Default Value

DSS_LCD_CONTRAST

Value Format

Description

Value Range

Default Value

DELAY_RING_TIME_n

Parameter Name Example

Value Format

Description

Value Range

Default Value

OFF_HOOK_MONITOR_ENABLE

Value Format

Description

Value Range

Default Value

1–6

INTEGER

Specifies the contrast level of DSS units' LCD.

BOOLEAN

Specifies whether to enable or disable the Off-hook Monitor function.

・Y: Enable Off-hook Monitor

・N: Disable

Ｙ

1–6

INTEGER

Specifies the backlight level of the LCD when it is inactive.

INTEGER

・0: Off

・1: On

・2: Auto

・0: Off

・1: Low

Specifies the activation of the backlight of DSS units' LCD.

INTEGER

Specifies the backlight level of DSS units' LCD.

DELAY_RING_TIME_1, DELAY_RING_TIME_2,…,DELAY_RING_TIME_16

INTEGER

Specifies the length of time, in seconds, until the unit rings.

0–30

0: Disable

PRIVATE_HOLD_ENABLE

Value Format

Description

Value Range

Default Value

Web User Interface Reference

CONF_OWNER_OUT_ENABLE

Value Format

Description

Value Range

Default Value

PCAP_ENABLE

Value Format

Description

Value Range

Default Value

PCAP_REMOTE_ID

Value Format

Description

Value Range

Default Value

PCAP_REMOTE_PASS

Value Format

Description

Value Range

Default Value

PCAP_REMOTE_PORT

Value Format

Description

Value Range

Default Value

BOOLEAN

Specifies whether to enable or disable private hold.

・Y: Enable private hold

・N: Disable

Private Hold

BOOLEAN

Empty string

STRING

Specifies the password of the IP phone whose packets will be captured using the

Wireshark utility (PCAP Remote).

0, 6–64 characters

Empty string

INTEGER

Specifies the port of the IP phone to use for capturing packets using the

Wireshark utility (PCAP Remote).

1–65535

2002

BOOLEAN

Specifies whether to enable or disable packet capturing using the Wireshark

utility (PCAP Remote).

・Y: Enable PCAP Remote

・N: Disable

STRING

Specifies the ID of the IP phone whose packets will be captured using the

Wireshark utility (PCAP Remote).

1–16 characters

Specifies whether to allow the remaining two parties in a three-party conference

to continue the conversation if the conference originator leaves the conference

call (Unattended Conference).

・Y: Enable Unattended Conference

・N: Disable

DTMF_OUT_ENABLE

Value Format

Description

Value Range

Default Value

CANCEL_OPERATION_MODE

Value Format

Description

Value Range

Default Value

7. 5.3.3 Ethernet Port Settings

Add the following configuration parameter.

CDP_ENABLE

Value Format

Description

Value Range

Default Value

Web User Interface Reference

CDP_INTERVAL

Value Format

Description

Value Range

Default Value

Web User Interface Reference

8. 5.3.10 XML Settings

Add the following configuration parameter.

XML_PHONEBOOK_URL

Value Format

Description

Value Range

Default Value

Max.256 characters

Empty string

Packet Interval

Specifies the URL to download the XML phonebook file from.

BOOLEAN

Enable CDP

Specifies the interval, in seconds, between sending each CDP frames.

1–3600

INTEGER

Specifies the operation of the [CANCEL] button when a line is in use.

0: Cancel the current operation

1: Return to standby mode

BOOLEAN

Specifies whether received outband DTMF signals are output audibly.

・Y: Enable audible outband DTMF

・N: Disable

STRING

・Y: Enable CDP

・N: Disable

INTEGER

Specifies whether to enable the CDP feature.

XML_PHONEBOOK_CYCLIC_INTVL

Value Format

Description

Value Range

Default Value

XML_CURSOR_SKIP_ENABLE

Value Format

Description

Value Range

Default Value

XMLAPP_URL_REDIAL_KEY

Value Format

Description

Value Range

Default Value

9. 5.3.14 Call Center Settings

Add the following configuration parameter.

UC_HOTELING_MODE

Value Format

Description

Value Range

Default Value

UC_FLEXIBLESEATING_UNLOCKPIN

Value Format

Description

Value Range

Default Value

0: Hoteling not supported

1: Hoteling supported

2: Host

3: Guest

STRING

Specifies the unlock PIN for Flexible Seating.

4–10 digits

Empty string

・Y: Enable skipping the cursor display on line 1 (id=1)

・N: Disable

STRING

When the redial key is defined by an XML element, specifies the URL that is

accessed when the [REDIAL] key is pressed.

Max.256 characters

(The ampersand [&] character is available)

Empty string

INTEGER

Specifies the interval, in minutes, between periodic checks for updates to the

XML phonebook. If this parameter is set to "0", the timing is the same as that

for updating the configuration files.

0, 1–40320

BOOLEAN

Selects whether to skip displaying the cursor on line 1 (id=1) of the display on

the XML menu.

Specifies the Flexible Seating mode. This service allows a guest to use the host's

device as his own.

Andere Handbücher für KX-HDV430

Inhaltsverzeichnis

Andere Panasonic IP-Telefon Handbücher

Panasonic

Panasonic KX-HDV330 Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Service-Handbuch

Panasonic

Panasonic KX-TG6411C Bedienungsanleitung

Panasonic

Panasonic KX-NT400 Bedienungsanleitung

Panasonic

Panasonic KX-UTG200 Bedienungsanleitung

Panasonic

Panasonic KX-HGT100-B Bedienungsanleitung

Panasonic

Panasonic KX-T7420 Bedienungsanleitung

Panasonic

Panasonic KX-HDV430 Bedienungsanleitung

Panasonic

Panasonic KX-DT521 Bedienungsanleitung

Panasonic

Panasonic KX-HDV100 Service-Handbuch

Panasonic

Panasonic KX-NT543 Bedienungsanleitung

Panasonic

Panasonic KX-UDT131 Bedienungsanleitung

Panasonic

Panasonic KX-TD7665 Bedienungsanleitung

Panasonic

Panasonic KX-UDT 111 Bedienungsanleitung

Panasonic

Panasonic KX-NT543 Bedienungsanleitung

Panasonic

Panasonic KX-UTG200 Bedienungsanleitung

Panasonic

Panasonic KX-DT 343 Series Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Handbuch

Panasonic

Panasonic KX-TGC310UE Bedienungsanleitung

Panasonic

Panasonic VoiceSonic KX-NT700 Bedienungsanleitung

Panasonic

Panasonic KX-TGP500 Gebrauchsanweisung

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung

Panasonic

Panasonic KX-UT133-B Service-Handbuch

Panasonic

Panasonic KX-T7433 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung