Panasonic KX-TGP600 Bedienungsanleitung

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

PANASONIC TGP600/TPA60/TPA65

QUICK SETUP GUIDE

Online instructional videos and manufacturer user guides are also available.

Visit www.primus.ca/hpbxguide for more information.

What You Need

Panasonic base unit and cordless

handset (model KX-TGP600) from

Primus Business Services

(If applicable)

Panasonic cordless handset

(model KX-TPA60) from Primus

Business Services

(If applicable)

Panasonic wireless desk phone

(model KX-TPA65) from Primus

Business Services

An Internet connection with a

modem or router

Your device may vary

Hosted PBX service from Primus

Business Services

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

Setting Up the Base Unit (KX-TGP600)

1. Take the Ethernet cable (included with your unit) and plug one end to the

port on the base unit. Plug the other end of the cable to your internet

modem, router, or switch.

2. Plug the AC adapter (Part No. PQLV219) into the base unit. Press the plug

firmly to make sure it is in place. There is a hook at the bottom of the unit to

secure the cable in place to prevent it from being accidentally pulled out.

Plug the AC adapter into an electrical outlet.

3. Once everything is connected, the base unit will go through an auto-

configuration process, which may take up to 10 minutes. You are ready to

make and receive calls when the STATUS light indicator turns to solid

green.

NOTE:

The configuration may take up to 10 minutes, and may reboot several times.

Leave the base unit plugged in for at least 10 minutes before making any

changes.

When the base unit is first connected to power, the STATUS indicator will

be solid red. If the STATUS indicator is off, make sure the AC adaptor and

Ethernet cable are properly plugged in, and verify your network device

(modem, router, switch) is on and functioning.

If the STATUS indicator remains red or amber after 10 minutes, try

plugging the base unit directly to your Internet modem instead of through

your routers, switches, or firewalls.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

For wall mount instructions, see Panasonic Operating Instructions for the

KX-TGP600, available at http://primus.ca/business/hpbxguide.

For additional troubleshooting tips, please review the Hosted PBX Small

Office Basic Troubleshooting Guide, available at

http://primus.ca/business/hpbxguide.

If the configuration process was interrupted or if you need assistance, please

contact Primus HPBX Technical Support at 1-888-222-8577.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

Status Light Indicators

STATUS Indicator

Solid Green The base unit is connected to the internet and connected

to the HPBX Small Office system.

Slow Flashing Green

(once a second)

The base unit is being used for a call.

The base unit is downloading data. Do not disconnect the

Ethernet cable or AC power adaptor from the base unit

until the light becomes solid green.

Quick Flashing Green

(4 times a second)

The handset/desk phone is busy.

Solid Red The base unit is booting up. This will take about 40

seconds.

Slow Flashing Red

(once a second)

The base unit is registering a handset/desk phone.

Quick Flashing Red

(4 times a second)

The base unit is paging handsets/desk phones (by using

the handset locator button).

Solid Yellow The base unit’s IP address may conflict with another IP

address on your network.

Slow Flashing Yellow

(once a second)

The base unit is attempting to connect to the Internet or to

the HPBX Small Office system. Please wait.

If it flashes indefinitely, check your network settings,

ensure your Internet connection is working, or try

restarting all your devices.

Quick Flashing Yellow

(once a second)

Unplug the base unit’s AC adaptor to reset the unit, then

reconnect the AC adaptor.

If it is still flashing, there may be a problem with the base

unit hardware.

Slow switching (Red

→Green →Amber →

Off)

The base unit is in maintenance mode. Once it is off, turn

the base unit back on again.

Quick switching (Red

→Green →Amber →

Off)

The base unit is restarting. Please wait.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

Off The base unit power is off.

The Ethernet cable is not connected properly.

Your network devices (modem, switch, router, etc) are

turned off or not functioning.

Setting up the Cordless Handset (KX-

TGP600/KX-TPA60)

1. Plug the AC adapter into the charger (it may already be plugged in). Press

the plug firmly to make sure it is in place. There is a cord holder at the

bottom of the unit to secure the cable in place to prevent it from being

accidentally pulled out. Plug the AC adapter into an electrical outlet.

2. Remove the plastic wrapper from the rechargeable batteries included in the

box, and place them into the handset. Close the cover.

3. (Optional) Attach the belt clip by pushing the clip onto the back of the

handset. Inset the clip into the designated notches in the handset.

4. Place the handset into the charger and confirm that the light at the top left of

the handset is solid red. Charging the unit takes about 6 hours. When the

batteries are fully charged, the light will turn off and the Battery Indicator at

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

the top right of the display will be full. You are now ready to make and

receive calls from the cordless handset.

NOTE:

•For wall mount instructions, see Panasonic Operating Instructions for

the KX-TGP600, available at http://primus.ca/business/hpbxguide

•If you ordered additional cordless handsets (Panasonic KX-TPA60)

wireless desk phones (Panasonic KX-TPA65), or repeaters (Panasonic

KX-A406), you must register them with the base unit. Please see the

corresponding sections below.

egistering Additional Cordless Handsets

(KX-TPA60)

The Panasonic KX-TGP600 can support up to 8 cordless handsets or wireless desk

phones. If you ordered additional cordless handsets, you must register the

handset with your base unit before using it.

There are two methods to register the handset.

Use Method 1 if you have easy access to the base unit. If the base unit is difficult to

reach (e.g. it is mounted high up on the wall or on the ceiling), use Method 2.

Method 1: Registering Using the Base Unit

1. On the base unit, press and hold the handset locator button for about 3

seconds (button is located on the right side of the unit). The STATUS

indicator on the base unit will flash red.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

2. On the cordless handset, press and hold OK until the display shows “Please

Wait…”. The registration is complete when the display shows “Registered”.

Method 2: Registering without Using the Base Unit

If your base unit is mounted on the wall and is hard to reach, you can activate

registration mode remotely using an already registered handset or desk phone.

1. Using the already registered handset or desk phone, press MENU by

pressing the centre soft key.

2. Using the navigation keys, choose and press OK.

3. Choose System Settings and press OK.

4. Choose Register H/S and press OK.

5. Select the first handset on the list and press OK. The display will show

“Executing…”, and the STATUS indicator on the base unit will flash red

6. On the unregistered cordless handset, press and hold OK until the display

shows “Please Wait…”. The registration is complete when the display shows

“Registered”.

Naming Handsets

With more than one cordless handset, it is easy to get them mixed up. You can

name each handset to avoid confusion. To name the handset, press MENU by

pressing the centre softkey, then select

and press OK. Then choose Display

Option, and then Standby Display. Enter a name for the handset, and press OK.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

Setting up a Wireless Desk Phone (KX-TPA65)

The Panasonic KX-TGP600 can support up to 8 cordless handsets or wireless desk

phones. If you ordered desk phones, you must register the phone with your base

unit before using it.

1. Attach the stand to the desk phone by inserting the stand into the hooks

located in the unit. Gently rotate the stand in the direction indicated until it is

released.

2. Adjust the stand position by pushing the PUSH marks in the direction

indicated, with both hands, and tilt the stand until it becomes fixed in the

desired position.

High →Low Position

Low →High Position

3. Plug one end of the coiled handset cord to the base and plug the other end

to the handset. Attach

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

4. Plug the AC adapter into the base unit. Press the plug firmly to make sure it

is in place. There is a hook at the bottom of the unit to secure the cable in

place to prevent it from being accidentally pulled out. Plug the AC adapter

into an electrical outlet. Verify that the phone is turned on – the display

should turn on.

5. You must now register the desk phone to the base unit. There are two

methods to register the desk phone. Use Method 1 if you have easy access

to the base unit. If the base unit is difficult to reach (e.g. it is mounted high

up on the wall or on the ceiling), use Method 2.

Method 1: Registering Using the Base Unit

a. On the base unit, press and hold the handset locator button for

about 3 seconds (button is located on the right side of the unit). The

STATUS indicator on the base unit will flash red.

b. On the desk phone, press and hold OK until the display shows

“Please Wait…”. The registration is complete when the display

shows “Registered”.

Method 2: Registering without Using the Base Unit

If your base unit is mounted on the wall and is hard to reach, you can

activate registration mode remotely using an already registered handset or

desk phone.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC TGP600 TPA60 TPA65 QUICK SETUP

GUIDE

a. Using the already registered handset or desk phone, press MENU

by pressing the centre soft key.

b. Using the navigation keys, choose and press OK.

c. Choose System Settings and press OK.

d. Choose Register H/S and press OK.

e. Select the first handset on the list and press OK. The display will

show “Executing…”, and the STATUS indicator on the base unit will

flash red.

f. On the unregistered desk phone, press and hold OK until the

display shows “Please Wait…”. The registration is complete when

the display shows “Registered”.

NOTE:

•For wall mount instructions, see Panasonic Operating Instructions for

the KX-TGP600, available at http://primus.ca/business/hpbxguide

Separate purchase required for wall mount.

Andere Handbücher für KX-TGP600

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic IP-Telefon Handbücher

Panasonic

Panasonic KX-T7667 Bedienungsanleitung

Panasonic

Panasonic T-Mobile KX-HDV130 Bedienungsanleitung

Panasonic

Panasonic DECT Portable Station KX-TCA256 Bedienungsanleitung

Panasonic

Panasonic VoiceSonic KX-NT700 Bedienungsanleitung

Panasonic

Panasonic KX-UT123 Bedienungsanleitung

Panasonic

Panasonic T-Mobile KX-HDV130 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Handbuch

Panasonic

Panasonic KX-NT343 Bedienungsanleitung

Panasonic

Panasonic KX-NT551 Bedienungsanleitung

Panasonic

Panasonic TGP 550 Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Bedienungsanleitung

Panasonic

Panasonic KX-T7420 Bedienungsanleitung

Panasonic

Panasonic KX-TG6721EB Bedienungsanleitung

Panasonic

Panasonic KX-HDV430 Betriebsanleitung

Panasonic

Panasonic KX-TDA0350 Bedienungsanleitung

Panasonic

Panasonic NT346-B - KX - VoIP Phone Bedienungsanleitung

Panasonic

Panasonic VoiceSonic KX-NT700 Bedienungsanleitung

Panasonic

Panasonic KX-UDT 121 Bedienungsanleitung

Panasonic

Panasonic GSM EB-G500 Series Bedienungsanleitung

Panasonic

Panasonic KX-UTG200 Bedienungsanleitung

Panasonic

Panasonic KX-TD208E Technische Daten

Panasonic

Panasonic KX-NT343 Bedienungsanleitung

Panasonic

Panasonic KX-UT133-B Bedienungsanleitung

Panasonic

Panasonic KX-NT400 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung