Panasonic Zener Diodes MALS068X Bedienungsanleitung

Zener Diodes

Publication date: April 2006 SKE00022CED

MALS068X

Silicon planar type

For constant voltage and surge absorption circuits



Features

 Features



Bi-directional and high electrostatic discharge ESD

 Bi-directional and high electrostatic discharge ESD



Small terminal capacitance C

 Small terminal capacitance C



Absolute Maximum Ratings

 Absolute Maximum Ratings 

= 25

a = 25

Parameter

Symbol

Rating

Unit

Repetitive peak forward current

FRM

200

Total power dissipation

150

Junction temperature

150

Storage temperature

stg

Tstg

–55 to +150

Electrostatic discharge

ESD

Note)

1 : P

= 150 mW achieved with a printed circuit board.

2 : Test method: IEC61000-4-2

(C = 150 pF, R = 330

Ω

, Contact discharge: 10 times)



Electrical Characteristics

 Electrical Characteristics 

= 25

a = 25

Parameter

Symbol

Conditions

Min

Typ

Max

Unit

Zener voltage

= 5 mA

Z = 5 mA

6.5

7.0

7.5

Zener operating resistance

= 5 mA

Z = 5 mA

Ω

Reverse current

= 4.0 V

R = 4.0 V

Terminal capacitance

= 0 V, f = 1 MHz

R = 0 V, f = 1 MHz

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.

2. The temperature must be controlled 25

C for V

mesurement.

value measured at other temperature must be adjusted to V

(25

: V

guaranted 20 ms after current ﬂ ow.

Unit : mm

1 : Cathode

2 : Cathode

EIAJ : SC-79 SSMini2-F1 Package

0.80+0.05

–0.03

0.60+0.05

–0.03

0.12+0.05

–0.02

1.20+0.05

–0.03

0+0

–0.05

0.30±0.05

0.01±0.01

1.60±0.05

0.01±0.01

0.80±0.05(0.80)

(0.60)

(0.15)

(0.60)

5°

Marking Symbol:

Internal Connection

This product complies with the RoHS Directive (EU 2002/95/EC).

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Inhaltsverzeichnis

Andere Panasonic Netzwerk-Hardware Handbücher

Panasonic

Panasonic WJ-NX200K Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA3J7440G Bedienungsanleitung

Panasonic

Panasonic Transistors 2SA2162G Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC3931G Bedienungsanleitung

Panasonic

Panasonic WJ-NV200 Bedienungsanleitung

Panasonic

Panasonic BN-SW60ANL0 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC3931 Bedienungsanleitung

Panasonic

Panasonic Circuit Protector Elements UNHZ203 Bedienungsanleitung

Panasonic

Panasonic Chip RC Networks EZACT Benutzerhandbuch

Panasonic

Panasonic GA-ML Series Bedienungsanleitung

Panasonic

Panasonic PIN diodes MA27P110G Bedienungsanleitung

Panasonic

Panasonic Switching Diodes MA36132E Bedienungsanleitung

Panasonic

Panasonic PN261693D Bedienungsanleitung

Panasonic

Panasonic RD-AA8190-01 Bedienungsanleitung

Panasonic

Panasonic WJ-PB85C16 Bedienungsanleitung

Panasonic

Panasonic Zener Diodes MAZ8xxxG Series Bedienungsanleitung

Panasonic

Panasonic Transistors 2SA1791J Bedienungsanleitung

Panasonic

Panasonic Transistors 2SA2161J Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC2480 Bedienungsanleitung

Panasonic

Panasonic PIN Diodes MA27P07 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC3930G Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA2SE01 Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Bedienungsanleitung

Panasonic

Panasonic K-NL408KT/G Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung