Panasonic CQ-RDP153N Bedienungsanleitung

ORDERNo. ACED030237C8

AUTOMOTIVE AFTERMARKET

CQ-RDP153N / CQ-RDP143N / CQ-RDP133N / CQ-RDP123N /

CQ-RDP113N / CQ-RDP103N / CQ-RDP003N

RemovableFront Panel CD Player / Receiver with CD Changer

Control

SPECIFICATIONS

Specifications*

General

Power Supply DC 12V (11V - 16V),

Test Voltage14.4V

NegativeGround

ToneControls Bass ; ±12dB at 100Hz

Treble; ±12dB at 10kHz

Current Consumption Less than2.5A(CD mode, 0.5W×

4ch)

MaximumPower Output 45W×4ch(at 4 )

Speaker Impedance 4-8

Pre-AmpOutput Voltage 2.5V (CD mode)

Pre-AmpOutput Impedance 200

FM StereoRadio

FrequencyRange 87.5- 108MHz

UsableSensitivity 6dB/ V (S/N 30dB)

MWRadio

FrequencyRange 531 - 1,602kHz

UsableSensitivity 28dB/ V (S/N 20dB)

LW Radio

FrequencyRange 153 - 279kHz

UsableSensitivity 32dB/ V (S/N 20dB)

CD Player

Sampling Frequency 8 times oversampling

Pick-UpType Astigma 3-beam

Light Source SemiconductorLaser

Wavelength 780nm

FrequencyResponse 20Hz to20,000Hz (±1dB)

Signal toNoise Ratio 96dB

Channel Separation 75dB

Dimensions** 178(W)×50(H)×155(D)mm

Weight** 1.4kg

*Specificationsand thedesign are subject topossible

modification without notice duetoimprovements.

** Dimensionsand Weight shownare approximate.

Unauthorized copying and distribution isaviolation of law.

1. ABOUT LEAD FREE SOLDER (PbF)

Distinction of PbF PCB:

PCBs (manufactured) using leadfree solderwill have a PbF stampon the PCB.

Caution :

-Pb free solder has ahigher melting point than standard solder;

Typicallythe melting point is50 -70°F (30 -40°C)higher. Please

use asoldering iron with temperature control and adjust itto 700 ±

20°F (370 ± 10°C). Incase of using high temperature soldering

iron, please be careful not to heat too long.

-Pb free solder will tend to splash when heated too high (about

1100°F/600°C)

-Thislead free solder will be used for the products after serial No.

1,000,001.

2. FEATUERS

-PLL (Phase Locked Loop) synthesized tuning.

-18-FM, 6-AMpresets with preset scan

-Digital servo for reliableCD playback.

-Removableface plate.

-RDS(RadioData System) function.

3. LASER PRODUCTS

4. FUSE

Use fuses of the same specifiedrating (15A). Using different substitutes orfuses withhigher

ratings, orconnecting the unit directlywithout a fuse, couldcause fire ordamage tothe unit.

5. MAINTENANCE

Wipe the unit witha soft drycloth. / Neverapplyvolatile liquids suchas benzine and thinnerto

prevent damage

6. NOTES

[RADIO BLOCK]

Donot align the AM/FM package block. Whenthe package block is necessary, it will be supplied

alreadyalignedat the factory.

[CD DECK BLOCK]

This model has no servoalignment points because microcomputercontrols the servocircuit.

[OTHER]

The following table describes the differences between7 models.

Changer Control Pre-OUT Illumination Color Face Color

CQ-RDP153N Yes 4(Front/Rear) Blue/Red Plating Silver

CQ-RDP143N Yes 4(Front/Rear) Amber Plating Silver

CQ-RDP133N Yes 4(Front/Rear) Green Plating Silver

CQ-RDP123N None 2(Rear) Blue/Red Coating Black

CQ-RDP113N None 2(Rear) Amber Coating Black

CQ-RDP103N None 2(Rear) Green Coating Black

CQ-RDP003N None 2(Rear) Amber Coating Silver

7. DIMENSIONS

8. WIRING CONNECTION

9. BLOCK DIAGRAM

10. TERMINALS DESCRIPTION

10.1. MainBlock

IC601 : C2CBHF000281

Pin No. Port Descriptions I/O(V) FM(V) AM(V) CD (V)

1NC (Connecting to ground) - 0 0 0

2 NC (Connecting to ground) - 0 0 0

3 NC (Connecting to ground) - 0 0 0

4AVSS Analog ground - 0 0 0

5AF MUTE AF mute O 5.1 5.1 5.2

6AMP-CNT Power Amp. stand-by O 5.1 5.1 5.2

7AVREF Reference voltage - 5.1 5.1 5.2

8 CD-SO CD data I 0 0 0

9CD-SI CD data O 0 0 2.4

10 CD-SCK CD clock O 0 0 5.1

11 CD.C DATA CD CH data I 0 0 0

12 BATT Batterylevel detection I 5.1 5.1 5.1

13 CD.C CLK CD.CH clock I 0 0 0

14 REMOUT CD.CH remote O 5.1 5.1 5.1

15 BZOUT Buzzer out O 0 0 0

16 PLL-DO Data from PLL I 5.1 5.1 5.1

17 PLL-DI Data for PLL O 0 0 0

18 PLL-CLK Clock for PLL O 5.1 5.1 5.2

19 PLL-CE PLL chip enable O 0 0 0

20 NC No connection - - - -

21 NC No connection - - - -

22 MUTE Mute control O 5.1 5.1 5.1

23 NC No connection - - - -

24 CD-STB CD strobe O 0 0 5.1

25 CD-A0 CD address 0 O 0 0 4.4

26 CD-RST CD reset O 0 0 5.1

27 CD-RFOK CD RFOK signal I 0 0 5.0

28 CD-LOCK CD lock signal I 0 0 5.0

29 CD-LIMIT CD limitsw I 0 0 5.1

30 CD-SW2 CD SW2 I 5.1 5.1 0

31 NC No connection - - - -

32 NC No connection - - - -

33 Vss1 Ground - 0 0 0

34 NC No connection - - - -

35 ST FMstereo detection I 5.0 5.1 0

36 IC2-CLK Electronicvolumeclock O 5.1 5.1 5.2

37 IC2-DATA Electronicvolumedata I/O 5.1 5.1 5.2

38 S.LED Notused - - - -

39 NC No connection - - - -

40 NC No connection - - - -

41 LCD-DI LCD data output O 0 0 0

42 LCD-DO LCD data input I 5.0 5.0 5.0

43 LCD-CLK LCD clock O 0 0 0

44 LCD-CE LCD chip enableoutput O 0 0 0

45 POWER LED Pilotlamp on O 0 0 0

46 ANT.CONT Notused - - - -

47 NC No connection - - - -

48 NC No connection - - - -

49 REM-IN_SUB Remote control sig. sampling I 4.4 4.4 4.4

50 NC No connection - - - -

Pin No. Port Descriptions I/O(V) FM(V) AM(V) CD (V)

51 NC No connection - - - -

52 NC No connection - - - -

53 NC No connection - - - -

54 TEL-MUTE Telephonemute I 5.1 5.1 5.1

55 PANEL Panel detect I 4.8 4.8 4.9

56 CD-CNT CD power control O 0 0 5.1

57 PWR CNT Power control O 5.0 5.0 5.0

58 NC No connection - - - -

59 RDSDATA RDSdata I 2.5 2.5 2.5

60 /RESET Reset input I 5.1 5.1 5.1

61 REM-DATA Remocon data input I 4.4 4.4 4.4

62 CD_SW1 CD modeSW I 0 0 0

63 RDSCLK RDSclock I 2.5 2.5 2.5

64 CD.C.STB CD.CH strobe I 0 0 0

65 ROTALY.1 Volumeup SW I 5.1 5.1 5.1

66 ROTALY.2 Volumedown SW I 0 0 0

67 VSS0 Ground - 0 0 0

68 VDD1 +5Vpower supply - 5.1 5.1 5.1

69 X2 Crystal oscillator - 3.1 3.1 3.1

70 X1 Crystal oscillator - 2.2 2.2 2.2

71 Vpp (Ground pull-down) - 0 0 0

72 XT2 Crystal oscillator - 3.1 3.1 3.1

73 XT1 Crystal oscillator - 2.5 2.5 2.5

74 VDD0 +5Vpower supply - 5.1 5.1 5.1

75 AVREF Analog reference voltage - 5.1 5.1 5.1

76 VSM S-meter detection I 0 0 0

77 ACC ACC level detection I 5.1 5.1 5.1

78 INITA Initial value(Note 2) I #1 #1 #1

79 NC No connection - - - -

80 NC No connection - - - -

Note 1 :

Voltage measuerments are with respect to ground, with avoltmeter

(internal resistance :10M ohms).

Note 2 : #1

0V :CQ-RDP153/143/133N

5.1V :CQ-RDP123/113/103/003N

10.2. DisplayBlock

IC901 : YEAMLC75854T

Pin No. Port Descriptions I/O(V) (V)

1-8 SEG1-8 LCD segment O 2.5

9-35 SEG9-35 LCD segment O 2.5

36-39 NC No connection - -

40-43 COM1-4 LCD common O 2.5

44 NC No connection - -

45-49 KS2-6 Keydata output O 0.9

50-54 KI1-5 Keydata input I 0

55 TEST (Connecting to ground) - 0

56 VDD +5Vpower supply - 5.1

57 VDD1 Ground through capacitor - 3.3

58 VDD2 Ground through capacitor - 1.7

59 Vss Ground - 0

60 OSC CR oscillator - 3.9

61 DO Keydata output O 4.4

62 CE Chip enable I 0

63 CLK LCD clock I 0

64 DI LCD data input I 0

10.3. CD Servo Block

IC101 : C1BB00000665

Pin No. Port Descriptions I/O Vol.(V)

1D.GND Digital logicGround - 0

2 RFOK RFOK outputsignal O 5.0

3 /RST System reset I 5.1

4A0 Command/Parameter specification I 4.5

5 /STB Serial data strobe I 5.1

6 /SCK Data shift clock I 5.1

7SO Serial data O 0

8SI Serial data I 2.4

9XTALEN (Connecting to ground) - 0

10 D.VDD Digital logicpower supply - 5.0

11 DA.VDD DAC power supply - 4.8

12 R_OUT Audio R ch O 2.4

13 DA.GND DAC ground - 0

14 REGC Bypass capacitor for SCF regurator - 2.5

15 DA.GND DAC ground - 0

16 L_OUT Audio L ch O 2.4

17 DA.VDD DAC power supply - 4.8

18 R+ Notused - -

19 R- Notused - -

20 L- Notused - -

21 L+ Notused - -

22 X.VDD Crystal OSC power supply - 5.0

23 /XTAL Crystal OSC terminal - 2.4

24 XTAL Crystal OSC terminal - 2.2

25 X.GND Crystal OSC ground - 0

26 D.VDD Digital logicpower supply - 5.0

27 EMPH Notused - -

28 FLAG Notused - -

29 DIN DAC serial data I 2.6

30 DOUT DAC serial data O 2.6

31 SCKIN DAC shift clock I 2.7

Dieses Handbuch passt für folgende Modelle

Andere Panasonic Empfänger Handbücher

Panasonic

Panasonic RF-U160 Bedienungsanleitung

Panasonic

Panasonic TU-PT600E Bedienungsanleitung

Panasonic

Panasonic elite sc-91 Bedienungsanleitung

Panasonic

Panasonic RF-P50 Bedienungsanleitung

Panasonic

Panasonic RF-B65D Bedienungsanleitung

Panasonic

Panasonic SAHE7 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic CQ-C5302W Bedienungsanleitung

Panasonic

Panasonic CF-AA Series Bedienungsanleitung

Panasonic

Panasonic PS-550SU Bedienungsanleitung

Panasonic

Panasonic AG-IA671 Bedienungsanleitung

Panasonic

Panasonic SAHE75 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic SA-HR50 Bedienungsanleitung

Panasonic

Panasonic SA-XR10 Bedienungsanleitung

Panasonic

Panasonic RF-SW50 Bedienungsanleitung

Panasonic

Panasonic QTR 2140 Bedienungsanleitung

Panasonic

Panasonic SA-G90 Bedienungsanleitung

Panasonic

Panasonic DNUA-P75 Bedienungsanleitung

Panasonic

Panasonic TU-PT600B Bedienungsanleitung

Panasonic

Panasonic SAHE9 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-XLR1 Bedienungsanleitung

Panasonic

Panasonic SAXR70 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic TU-DST52F Bedienungsanleitung

Panasonic

Panasonic CQ-KO2EG Bedienungsanleitung

Panasonic

Panasonic CQ-D1703N Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung