Panasonic WJND200 - NETWORK DISK RECORDER Bedienungsanleitung

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Administrator Console

Operating Instructions

Model No. WJ-ND200

Contents

Limitation of Liability ........................................................................................................3

Disclaimer of Warranty .................................................................................................... 3

Features .......................................................................................................................... 4

About Copyright and License ...................................................................................... 4

Trademarks and Registered Trademarks ................................................................... 4

System Requirements for aPC .................................................................................... 4

Preparations .................................................................................................................... 5

Connections ................................................................................................................ 5

Performing the network settings of the network disk recorder .................................... 5

Performing the network settings of a PC ..................................................................... 5

Installing This Software ................................................................................................... 6

Uninstalling This Software ............................................................................................... 7

Start the Software ............................................................................................................ 8

About the Operation Window .......................................................................................... 10

Setting Items ................................................................................................................... 11

Download the Setting Values .......................................................................................... 13

Upload the Setup File ...................................................................................................... 15

Create a Setup File Newly ............................................................................................... 18

Open the Setup File ........................................................................................................ 19

Save the Setup File ......................................................................................................... 20

Change the Password ..................................................................................................... 21

Error Messages ............................................................................................................... 22

Troubleshooting ............................................................................................................... 23

Limitation of Liability

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS

FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.

CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS

PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

Disclaimer of Warranty

IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY

PERSON,

EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES,

INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSE-

QUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION

OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

(4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYS-

TEM COMBINED BY THE DEVICES OF THIRD PARTY.

(5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHO-

TOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-

CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED

FOR THE PURPOSE OTHER THAN SURVEILLANCE

Features

The WJ-ND200 Administrator Console is the exclusive setup tool for the Network Disk Recorder WJ-ND200.

By using this software, it is possible to perform the settings of the network disk recorder using a PC via a network.

It is also possible to download the setting values and save it as a setup file, and upload the edited setup file to the

network disk recorder.

This software is applicable for version 1.1 or later of the WJ-ND200.

About Copyright and License

This software can be distributed and used only if you agree to the copyright and license agreement of this software.

Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export

laws of the software provided with this product are expressly prohibited.

Trademarks and Registered Trademarks

• Microsoft®, Windows®and Windows®XP are registered trademarks of Microsoft Corporation in the U.S. and/or

other countries.

• Intel®and Pentium®are trademarks of Intel Corporation.

• Adobe®, Adobe logos, and Acrobat®are registered trademarks of Adobe Systems Incorporated in the U.S.

and/or other countries.

• Other names of companies and products contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

System Requirements for a PC

It is recommended to install this software on a PC that meets the following system requirements.

OS: Microsoft®Windows®2000 Professional SP4

Microsoft®Windows®XP Professional SP2

Microsoft®Windows®XP Home Edition SP2

Note: It is required that Microsoft .NET Framework 1.1 is installed on the PC being used to

activate this software. (If Microsoft .NET Framework 1.1 is not installed on a PC, it will be

installed automatically when installing this software.)

OS language: Einglish, French, Spanish, German, Italian

CPU: Pentium®4 3.0 GHz or faster

Memory: 512 MB or more

Monitor: 1 024 x 768 pixels or more, 16-bit HIGH color or better

Network interface: 10/100 Mbps Network interface card must be installed

Hard disk drive: Approx. 100 MB of available disk space for installation (Disk space of 250 MB is required

when Microsoft .NET Framework is not installed)

Others: CD-ROM drive: It is necessary to read the operating instructions and use the sofatware on

the provided CD-ROM.

Adobe®Reader: It is necessary to read the operting instructions on the provided CD-ROM.

LINK

/ACT

HDD2

HDD1

ALARM

SUSPEND

ALARM

BUZZER

STOP

ERROR

MIRROR

TIMER

REC

OPERATE

Network Disk Recorder WJ-ND200

WJ-ND200

Network

Preparations

It is necessary to complete the connections between a PC and the network disk recorder and perform the network

settings of the PC and the network disk recorder respectively.

Connections

There are 2 methods to connect a PC and the network disk recorder:

•Connecting a PC and the network disk recorder directly

•Connecting a PC to the network disk recorder via a hub or a router

When connecting a PC to the network disk recorder, the required hardware and cables are different depending on

the system configuration. Prepare before starting connection.

Refer to the Setup Instructions (PDF) of the network disk recorder for descriptions of how to perform the network set-

tings.

Performing the network settings of the network disk recorder

Use the buttons on the front panel of the network disk recorder or a web browser on the connected PC to conform to

the network settings to the network environment of the PC.

Refer to the Setup Instructions (PDF) of the network disk recorder for further information about the network settings.

Performing the network settings of a PC

Change the TCP/IP setting of the PC on which this software is to be installed to conform to the network settings of

the network disk recorder.

It is required to set the IP address of the PC to "192.168.0.XX (a number from 2 to 254)" to access the network disk

recorder.

Refer to the Installation Guide (book) and the Setup Instructions (PDF) of the network disk recorder for descriptions

of how to perform the network settings of a PC.

Notes:

•This software must be installed or started by the administrator. Otherwise, any problems will not be covered by

the warranty.

•In these operating instructions, the settings are performed on Windows XP as examples.

Installing This Software

Notes:

•If Microsoft .NET Framework 1.1 is not installed on a

PC, it will be installed automatically when installing

this software.

It is possible to check with "Control Panel" whether

Microsoft .NET Framework 1.1 is installed on a PC

or not.

Open the "Change or Remove Programs" window by

selecting "Add or Remove Programs" in "Control

Panel".

The installed applications will be displayed in list

form.

Check if "Microsoft .NET Framework 1.1" is on the

list or not.

•When re-installing this software is needed, the exist-

ing software must be uninstalled first.

Install this software as follows after completing the network settings of the network disk recorder and PC.

Step 1

Insert the provided CD-ROM into the PC disk drive.

Step 2

Double click "setup.exe" in the "Admin" folder.

The confirmation window will be displayed.

Step 3

Click the "OK" button and follow the installation wizard to install this software.

The "WJ-ND200 Administrator Console" folder will be created (C:\Program Files\Panasonic\WJ-ND200/WJ-ND200

Administrator Console) and the necessary files will be copied in it.

When installation is complete, the application will be added to "Programs" in "Start" and the shortcut will be created

on the desktop.

Important:

Do not edit, remove, or move the directory path of the files above. Otherwise, this software may not function

properly.

Uninstalling This Software

Uninstall this software as follows, if necessary.

Step 1

Open "Add or Remove Programs" in "Control Panel".

The "Add or Remove Programs" window will be displayed.

Step 2

Select "WJ-ND200 Administrator Console" and click the "Remove" button.

Step 3

Follow the uninstall wizard.

Start the Software

Screenshot 1

Start just after the PC is started up. Step 1

Select "WJ-ND200 Administrator Console" from the

"Start" menu ("Start" - "All Programs" - "Panasonic" -

"WJ-ND200" - WJ-ND200 Administrator Console") or

double click the shortcut icon of "WJ-ND200

Administrator Console" on the desktop.

The software will start up.

Important:

the software.

Screenshot 2

The login window will be displayed. Step 2

Enter the password.

The default password is "12345".

Refer to page 21 for how to change the password.

Step 3

Click the [OK] button.

Screenshot 3

The top page of the operation window will be displayed. Step 4

Perform the settings for each item.

Step 5

Click the [SET] button after completing the settings.

Step 6

Close the window by clicking the button at the top

right of the window to exit the software.

Note:

It is possible to check version of the setup menu by displaying the "Product Information" page of "Maintenance"

on the setup menu using a web browser.

Refer to the Setup Instructions (PDF) of the network disk recorder.

When no camera is registered (no entry for the "MODEL/COMPRESSION" and "ADDRESS" of the Network

Camera Registration" window), the "Setup" page of "Quick" will be displayed as the top page of the operation

window.

When a camera is registered, the "Basic setup" page of "System" will be displayed as the top page.

Tool bar

: Click this button to download the setting values

from the recorder. (page 13)

: Click this button to upload the setup file (setting

values edited with this software) to the recorder.

(page 15)

: Click this button to create to a new setup file.

(page 18)

: Click this button to open the saved setup file.

(page 19)

: Click this button to save the edited setting val-

ues. (page 20)

: Click this button to change the login password.

(page 21)

Main menu

Configure the settings of the recorder.

Refer to pages 11 - 12 for the settings that can be con-

figured.

Submenu (tab)

When the selected menu contains the submenu page,

the tab of the submenu will be displayed.

Main area

The submenu item (tab) of the selected main menu will

be displayed.

:Click this button to apply the edited settings.

About the Operation Window

Main menu

Tool bar

Main area

Submenu

Andere Handbücher für WJND200 - NETWORK DISK RECORDER

Inhaltsverzeichnis

Andere Panasonic Aufnahmegeräte Handbücher

Panasonic

Panasonic AJLT85P - DVC PRO Bedienungsanleitung

Panasonic

Panasonic AJSPD850P - P2 DECK Bedienungsanleitung

Panasonic

Panasonic AG-6841HP Handbuch

Panasonic

Panasonic SVSR100 - SD AUDIO RECORDER Bedienungsanleitung

Panasonic

Panasonic AG-YA500G Bedienungsanleitung

Panasonic

Panasonic SLPR300 - CD RECORDER Bedienungsanleitung

Panasonic

Panasonic AJLT85P - DVC PRO Bedienungsanleitung

Panasonic

Panasonic MII AU-W35R Bedienungsanleitung

Panasonic

Panasonic AJ-HPM100P Bedienungsanleitung

Panasonic

Panasonic SVSR100 - SD AUDIO RECORDER Bedienungsanleitung

Panasonic

Panasonic SC-HG1 Series Bedienungsanleitung

Panasonic

Panasonic AJ-PD500 Bedienungsanleitung

Panasonic

Panasonic RR-XS410 Bedienungsanleitung

Panasonic

Panasonic SZ-CB8 Bedienungsanleitung

Panasonic

Panasonic WJHD309 - DIGITAL DISK RECORDER Bedienungsanleitung

Panasonic

Panasonic WZ-DE45NH Bedienungsanleitung

Panasonic

Panasonic AK-HCU200P Bedienungsanleitung

Panasonic

Panasonic OmniVision PV-DS1000 Bedienungsanleitung

Panasonic

Panasonic WJHD309 - DIGITAL DISK RECORDER Bedienungsanleitung

Panasonic

Panasonic AJ-DE97P Bedienungsanleitung

Panasonic

Panasonic WJ-NV300K Bedienungsanleitung

Panasonic

Panasonic AJ-DE77P Bedienungsanleitung

Panasonic

Panasonic AJHD1400 - DVCPRO HD VTR Bedienungsanleitung

Panasonic

Panasonic RR-XS600 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch