Panasonic MC-CG487-ZC79 Bedienungsanleitung

rights reserved. Unauthorized copying and distribu-

tion is a violation of law.

Order No.VCD0802004CE

Vacuum Cleaner

Model No. MC-CG487-ZC79

MC-CG487-ZA76

MC-CG487K-ZP47

Product Color :Metalic blue

Destination :Europe

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ----------------------------------------------------- 2

2 Location of Controls and Components ------------------- 3

3 Troubleshooting Guide ----------------------------------------- 5

4 Disassembly and Assembly Instructions ---------------- 6

4.1. Dust box cover assembly removal -------------------- 6

4.2. Separate the upper and lower body units ----------- 6

4.3. Printed circuit board assembly (P.C.B Ass’y)

removal------------------------------------------------------- 7

4.4. Motor removal ---------------------------------------------- 8

4.5. Cord reel partition unit replacement ------------------ 9

4.6. Rail base U replacement -------------------------------10

4.7. Spring-loaded cord reel pre-winding-----------------10

4.8. How to disassemble the turbine nozzle -------------10

5 Wiring Connection Diagram ---------------------------------12

6 Exploded View and Replacement Parts List -----------13

6.1. EXPLODED VIEW (ATTACHMETS)-----------------13

6.2. PARTS LIST (ATTACHMETS)-------------------------14

6.3. EXPLODED VIEW (BODY UNIT) --------------------15

6.4. PARTS LIST (BODY UNIT)---------------------------- 16

6.5. PACKING INSTRUCTIONS --------------------------- 17

6.6. PACKING LIST ------------------------------------------- 18

1 Specifications

Model No. MC-CG487 MC-CG487K

Power source 230 V~50 Hz 230-240 V~50 Hz

Input power (MAX) 2000W 2000W

Input power (IEC) 1600W 1500-1600 W

Dimensions (WxLxH)mm 280 mm x 425 mm x 260 mm

Net weight 5.1kg

Extension wand Telescopic

Crevice nozzle O

Dusting brush O

Upholstery nozzle O

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECK POINT METHOD OF INSPECTION TRANSACTION

Motor fails to rotate

(no noise is heard at all)

Power supply cord Check power supply cord continu-

ity.

If there is no continuity, replace the

cord reel patition unit.

Fuse

(Plug for UK only)

Check plug fuse continuity. If there is no continuity, replace the

cord reel patition unit.

Fuse of P.C.B. Ass’y

(250V, 12A)

Check fuse continuity. If there is no continuity, replace

P.C.B. Ass’y.

Motor continuity Check the conduction between the

terminals of the motor.

If there is no continuity, replace the

or motor.

ON/OFF Switch Check continuity across switch

connections

If there is no continuity, replace

P.C.B. Ass’y.

Triac (Inside of P.C.B.) Check if the triac is in open circuit. If it is in open circuit, replace

P.C.B.Ass’y.

P.C.B. Ass’y Check the internal parts for any-

thing unusual. (burn-out, melt-

down, etc.)

If anything is found unusual,

replace the P.C.B. assembly with

new one.

Motor runs but there is no suction Hose or Suction inlet, Extension

wand and nozzle

Check if there is any blockage in

the indicated parts.

If there is any blockage, remove it.

Dust bog / Secondary filter Check if dust bag is full or Second-

ary filter is choked up.

If dust bag is foll, replace with a

new one. If Secondary filter is

choked up, remove and clean it out

or replace.

Noise or vibration Motor fan Check dust accumulated in motor

fan (it could happen if the vacuum

cleaner has been used without cen-

tral filter).

If there is dust accumulated in the

motor fan, replace the motor and

check filter condition. (never try to

dismantle the motor fan)

Motor does not change power

(runs always at full speed)

Power control Adjust the power control and check

whether or not the resistance var-

ies. (Gray←→Blue)

If the resistance does not vary, then

replace the P.C.B. Ass'y.

P.C.B. Ass’y Examine the triac in the P.C.B.

Ass'y and check whether or not T1

and T2 are short-circuited.

If they are short-circuited, then

replace the P.C.B. Ass'y.

Motor runs irregularly P.C.B. Ass’y Check possible bad contact of

P.C.B. Ass’y.

Replace P.C.B. Ass’y.

4 Disassembly and Assembly Instructions

Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner.

Remove the power plug from the outlet.

* Caution:

1. Do not attempt to modify the machine, parts, etc. when marking repairs.

2. Even if a wire is partially disconnected, do not attempt to repair and/or connect it when a wired unit is available as

service parts. Replace the overall section with a new wired unit.

3. Pull out and/or insert the fastening terminal without twisting it.

4.1. Dust box cover assembly

removal

1. Open the dust box cover assembly at an angle of approx.

45°. Insert a flat-blade screwdriver between the upper

body and the dust box cover assembly and move it in the

direction of the arrow mark to remove the dust box cover

assembly from its right side.

4.2. Separate the upper and lower

body units

1. Remove the five screws fixing the upper body U and

lower body U.

2. Remove the screw fixing the upper body U from the rear

side.

3. Lift the upper body U to separate it from the lower body U.

4.3. Printed circuit board assembly

(P.C.B Ass’y) removal

1. Remove the Swivel cap unit and Insulation plate.

2. Here is drawing of the lead wire before the P.C.B AU is

removed.

3. Disengage the fast-on terminal of the wires (red) and

(blue) which lead to the cord reel partition wall connected

to the printed circuit board assembly.

* Caution:

Pull out the fastening terminal without twisting it.

Pull out by holding down the section indicated by an

arrow.

4. Remove the P.C.B. Ass'y from the P.C.B. holder.

5. Remove the two screws fixing the P.C.B. holder and pull it

out from the lower body U.

* For removing the printed circuit board assembly,

first remove the fast-on terminal for the connecting

section for the motor.

4.4. Motor removal

1. Remove the dust box lid assembly. (Refer to paragraph

4.1 on P.6)

2. Remove the upper body from the lower body. (Refer to

paragraph 4.2 on P.6)

3. Remove the printed circuit board Ass’y. (P.C.B Ass’y)

(Refer to paragraph 4.3 on P.7)

4. Remove the two screws fixing the P.C.B. holder and pull it

out from the lower body U.

5. Lift the motor section from the lower body U.

6. Remove all components fitted to the motor.

a. Remove the motor case plate.

b. Remove the motor support rubber (rear).

c. Remove the motor support.

d. Remove the noise suppressor.

e. Remove the motor support rubber (front).

f. Remove the lead wires connected to the motor.

4.5. Cord reel partition unit replace-

ment

1. Increase the gap width between the cord reel and the

lower body with a screwdriver. While removing the cord

reel shaft from the side of the lower body, lift the cord reel

partition unit.

* For easy removal, pull out the cord slightly, and

then lift the cord reel.

4.6. Rail base U replacement

1. Remove the screw fixing the rail base U onto the cord reel

partition U.

2. Remove the rail base U from the cord reel partition U.

4.7. Spring-loaded cord reel pre-

winding

1. The cord reel partition U has a spring that pre-winds the

cord reel.

If the cord is not wound, then press the brake arm, and

the cord pre-winding will be loosened.

If you wish to apply pre-winding again, then wind the cord

three turns in the direction of the arrow mark.

* If you wish to release the pre-winding, then make

sure to hold the cord plug.

4.8. How to disassemble the tur-

bine nozzle

4.8.1. Agitator ass'y

1. Rotate the brush cover to unlock it and remove the brush

cover U.

2. Pull up the rotating brush and remove the belt and rotat-

ing brush (complete). (Fig.19)

4.8.2. Separation of the floor nozzle upper

from the floor nozzle lower U

1. Remove the four screws fixing the floor nozzle lower U.

(Fig.20)

2. Remove the floor nozzle lower U.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Staubsauger Handbücher

Panasonic

Panasonic MCCG973 - CANISTER VAC - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MCV7309 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-GG525 Bedienungsanleitung

Panasonic

Panasonic MC-V5391C Bedienungsanleitung

Panasonic

Panasonic MC-V9634 Bedienungsanleitung

Panasonic

Panasonic MC-V5004 Bedienungsanleitung

Panasonic

Panasonic MC-UL910 Bedienungsanleitung

Panasonic

Panasonic EY37A3 Bedienungsanleitung

Panasonic

Panasonic MCUL675 - UPRIGHT VAC - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MC-UG471-00 Bedienungsanleitung

Panasonic

Panasonic MC-CL481K Bedienungsanleitung

Panasonic

Panasonic MC-E750 Bedienungsanleitung

Panasonic

Panasonic MCV120 - COMMERCIAL VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-V5210-00 Bedienungsanleitung

Panasonic

Panasonic MC-CG677-SC79 Bedienungsanleitung

Panasonic

Panasonic MC-V21003 Bedienungsanleitung

Panasonic

Panasonic MCV9638 - CANISTER VAC.-PLAT Bedienungsanleitung

Panasonic

Panasonic MC-CG676 Bedienungsanleitung

Panasonic

Panasonic MC-UG327 Bedienungsanleitung

Panasonic

Panasonic Quickdraw MC-V5247 Bedienungsanleitung

Panasonic

Panasonic MC-CL565 Bedienungsanleitung

Panasonic

Panasonic MCUG581 - PLATINUM UPRIGHT VAC Bedienungsanleitung

Panasonic

Panasonic MC-CL305 Bedienungsanleitung

Panasonic

Panasonic MCV5210 - COMMERCIAL VACUUM Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung