Panasonic MC-CG677-SC79 Bedienungsanleitung

rights reserved. Unauthorized copying and distribu-

tion is a violation of law.

Order No.VCB07040011CE

Vacuum Cleaner

MC-CG677-SC79

MC-CG677-SA76

MC-CG677K-SP47

Product Color :Silver

Destination :Europe

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ----------------------------------------------------- 2

2 Location of Controls and Components ------------------- 3

3 Troubleshooting Guide ----------------------------------------- 5

4 Disassembly and Assembly Instructions ---------------- 6

4.1. Dust box cover assembly removal -------------------- 6

4.2. Separate the upper and lower body units ----------- 7

4.3. Printed circuit board assembly (P.C.B Ass’y)

removal------------------------------------------------------- 7

4.4. Motor removal ---------------------------------------------- 9

4.5. Replacement of the indicator ornamental plate

unit ------------------------------------------------------------ 9

4.6. Replacement of the P.C.B. DU, P.C.B. KU,

and indicator unit -----------------------------------------10

4.7. Cord reel partition unit replacement -----------------11

4.8. Rail base U replacement -------------------------------11

4.9. Spring-loaded cord reel pre-winding-----------------12

4.10. How to disassemble the turbine nozzle ------------12

5 Wiring Connection Diagram ---------------------------------14

6 Exploded View and Replacement Parts List ----------- 15

6.1. EXPLODED VIEW (ATTACHMENTS) -------------- 15

6.2. PARTS LIST (ATTACHMENTS) ---------------------- 16

6.3. EXPLODED VIEW (BODY UNIT)-------------------- 17

6.4. PARTS LIST (BODY UNIT)---------------------------- 18

6.5. PACKING INSTRUCTIONS --------------------------- 19

6.6. PACKING LIST ------------------------------------------- 20

1 Specifications

Model No. MC-CG677 MC-CG677K

Power source AC230V~50Hz AC230-240V~50Hz

Input power (MAX) 1400W

Input power (Nominal) 1200W 1100-1200W

Power control O

Extension wand Metal telescopic

Turbin nozzle O

Dimensions (WxLxH)mm 280x430x260

Net weight 5.1kg

Cleaning tools Crevice nozzle / Dusting brush

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECKPOINT METHOD OF INSPECTION CAUSE / REMEDY

When dust is vacuumed off, the

dust sensor indicator lamp doesn’t

light up.

Or, it lights up when dust is not

vacuumed off.

With the swivel cap unit set to

“AUTO”, the dust suction power is

not affected

Air inlet Check whether or not dust or for-

eign substances adhere to the dust

sensor of the air inlet.

Wipe the dust sensor with a dry

soft cloth.

If there is no improvement in symp-

toms, then replace the P.C.B. assy.

Motor fails to rotate Power supply cord Check power supply cord continu-

ity.

If there is no continuity, replace the

cord reel patition unit.

Fuse of P.C.B. Ass’y

(250V, 10A)

Check fuse continuity. If there is no continuity, replace

P.C.B. Ass’y.

Motor continuity Check the conduction between the

terminals of the motor.

If there is no continuity, replace the

motor.

ON/OFF Switch Check continuity across switch

connections

If there is no continuity, replace

P.C.B. Ass’y.

Triac (Inside of P.C.B.) Check if there is any problem in the

triac.

(Please refer to how to check the

triac.)

If it has any problem, replace the

P.C.B. Ass’y.

P.C.B. Ass’y Check the internal parts for any-

thing unusual. (burn-out, melt-

down, etc.)

If anything unusual is found,

replace the P.C.B. Ass’y with new

one.

Motor runs but there is no suction Hose or Suction inlet Check if there is any blockage in

the hose or suction inlet.

If there is any blockage, remove it.

Dust bag / Secondary filter Check if dust bag is full or Second-

ary filter is choked up.

If dust bag is full, replace with a

new one. If Secondary filter is

choked up, remove and clean it out

or replace.

Noise or vibration Motor fan Check dust accumulated in motor

fan (it could happen if the vacuum

cleaner has been used without cen-

tral filter).

If there is accumulated dust in the

motor fan, replace the motor and

check filter condition. (never try to

dismantle the motor fan)

Motor does not change power

(runs always at full speed)

Power control Adjust the power control and check

whether or not the resistance var-

ies. (Black←→Red)

If the resistance does not vary, then

replace the Control.

P.C.B. Ass’y Examine the triac in the P.C.B.

Ass'y and check whether or not T1

and T2 are short-circuited.

If they are short-circuited, then

replace the P.C.B. Ass'y.

Motor runs irregularly P.C.B. Ass’y Check possible bad contact of

P.C.B. Ass’y.

Replace P.C.B. Ass’y.

4 Disassembly and Assembly Instructions

Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner.

Remove the power plug from the outlet.

4.1. Dust box cover assembly

removal

1. Open the dust box and remove the lead wire cover.

2. When removing the lead wire cover, use a flat-blade

screwdriver as an aid.

3. Remove the connectors from the lead wire AU and P.C.B.

DU.

4. Open the dust box lid assy at an angle of approximately

45 degrees and insert an flat-blade screwdriver into a gap

between the upper body and the dust box lid assy. Move

the screwdriver in the direction of the arrow to remove the

left fitting section of the dust box lid assy.

4.2. Separate the upper and lower

body units

1. Remove the five screws fixing the upper body U and

lower body U.

2. Remove the screw fixing the upper body U from the rear

side.

3. Lift the upper body U to separate it from the lower body U.

4.3. Printed circuit board assembly

(P.C.B Ass’y) removal

1. Remove the Swivel cap unit.

2. Remove the Insulation plate

3. Wiring illustration

4. Remove the P.C.B. Ass'y from the P.C.B. holder.

* When removing the P.C.B Ass’y, widen the frame of

the P.C.B holder, and then remove the P.C.B from the

hook of the P.C.B holder.

Note: When removing the P.C.B. assy, do not bend it

to prevent damage and the wires from breaking.

5. Remove the fastening terminal of the lead wire from cord

reel partition U connected to the printed circuit board and

that of the lead wire from the motor.

* Note: When removing the fastening terminal of the

lead wire, please hold the terminal fixed to the printed

circuit board to prevent an excessive load from being

applied to it.

6. Remove the Control and Lead wiire BU.

7. Remove the two screws fixing the P.C.B. holder and pull it

out from the lower body U.

4.4. Motor removal

1. Lift the motor section from the lower body U.

2. Remove the components fitted to the motor.

a. Remove the thermal protector.

b. Remove the motor support rubber (rear).

c. Remove the motor support.

d. Remove the lead wires connected to the motor.

e. Remove the noise suppressor.

f. Remove the motor support rubber (front).

* Note: When the thermal protector has been

replaced, make sure to paste the tape (gasket V) back

on the terminals.

4.5. Replacement of the indicator

ornamental plate unit

1. Remove the three screws fixing the air inlet guide on the

rear of the dust box lid assy.

2. Hook off the two fixing tabs on the indicator ornamental

plate unit with a flat-blade screwdriver.

3. Turn it over to remove the indicator ornamental plate unit.

4.6. Replacement of the P.C.B. DU,

P.C.B. KU, and indicator unit

1. Remove air inlet packing A.

2. Remove the indicator unit.

3. Remove the P.C.B. KU.

4. Remove the air inlet guide U and then remove the lead

wire AU from the P.C.B. DU.

5. Remove the P.C.B. DU from the air inlet guide tabs.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Staubsauger Handbücher

Panasonic

Panasonic MCV5330 - UPRIGHT VACUUM 12.0 Bedienungsanleitung

Panasonic

Panasonic MC-CL565 Bedienungsanleitung

Panasonic

Panasonic MC-YL637 Bedienungsanleitung

Panasonic

Panasonic MC-UG471-00 Bedienungsanleitung

Panasonic

Panasonic MC-CG882-SC79 Bedienungsanleitung

Panasonic

Panasonic MCCG381 - CANISTER VACUUM - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MC-CG713A249-AE Bedienungsanleitung

Panasonic

Panasonic MC-CG522RC79-DE Bedienungsanleitung

Panasonic

Panasonic MC-YL689 Bedienungsanleitung

Panasonic

Panasonic MC-4500 Bedienungsanleitung

Panasonic

Panasonic MC-YL669 Bedienungsanleitung

Panasonic

Panasonic MC-CG683-ZC79 Bedienungsanleitung

Panasonic

Panasonic Quickdraw MC-V7522 Bedienungsanleitung

Panasonic

Panasonic MCV325 - COMMERCIAL VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-SB33J Bedienungsanleitung

Panasonic

Panasonic MC-V5491 Bedienungsanleitung

Panasonic

Panasonic MC-CG663 Bedienungsanleitung

Panasonic

Panasonic MCUL675 - UPRIGHT VAC - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MC-CL676 Bedienungsanleitung

Panasonic

Panasonic MC-CG373 Bedienungsanleitung

Panasonic

Panasonic MC-UL815 Bedienungsanleitung

Panasonic

Panasonic MC-CL609 Bedienungsanleitung

Panasonic

Panasonic MC-V7600 Bedienungsanleitung

Panasonic

Panasonic QuickDraw MC-V5715 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung