Panasonic MC-UL712-KP47 Bedienungsanleitung

ing and distribution is a violation of law.

Order Number VCB1203001CE

Vacuum Cleaner

Model No. MC-UL712-KP47

MC-UL710-WP47

Product Color :(K)Black

:(W)White

Destination:UK

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ----------------------------------------------------- 2

2 Location of Controls and Components ------------------- 3

3 Troubleshooting Guide ----------------------------------------- 4

3.1. Troubleshooting quick reference chart --------------- 4

3.2. Inspection part/inspection method/remedy

according to the troubleshooting quick

reference guide.-------------------------------------------- 4

3.3. Safety Device----------------------------------------------- 6

4 Disassembly and Assembly Instructions ---------------- 7

4.1. Disassembly of the Body -------------------------------- 7

4.2. Replacement of the Fan Motor Unit ------------------ 9

4.3. Removal of the Nozzle Holder Unit -----------------11

4.4. Removal of the Switches ------------------------------12

4.5. Replacement of the Cord Set--------------------------13

4.6. Removal of the Handle Supporter Unit ------------- 14

4.7. Disassembly of the Nozzle Assy --------------------- 14

4.8. Removal of the Nozzle Motor Unit------------------- 15

4.9. Removal of the Nozzle Wand Unit ------------------ 15

4.10. Removal of the Lead Wire G Unit-------------------- 15

4.11. Body Wiring------------------------------------------------ 16

4.12. Nozzle Assy Wiring -------------------------------------- 16

5 Wiring Connection Diagram--------------------------------- 17

6 Exploded View and Replacement Parts List ----------- 18

6.1. EXPLODED VIEW (ATTACHMENTS) -------------- 18

6.2. PARTS LIST (ATTACHMENTS) ---------------------- 19

6.3. EXPLODED VIEW (BODY UNIT)-------------------- 20

6.4. PARTS LIST (BODY UNIT)---------------------------- 21

6.5. PARTS LIST (PACKING)------------------------------- 22

1 Specifications

2 Location of Controls and Components

3 Troubleshooting Guide

3.1. Troubleshooting quick reference chart

3.2. Inspection part/inspection method/remedy according to the

troubleshooting quick reference guide.

Inspection

code Inspection part Inspection method Remedy

A Switch • Check the continuity of the switch(with Switch turned on). • If there is no continuity, replace the

Switch.

• To check continuity, remove the

Gasket V from the terminals.

After checking, fit new Gasket V.

AMC56L-1800P

• When replacing the Switch, fit the

Gasket V as shown in the figure to

the left.

B Fuse Unit • Check the continuity of the Fuse Unit.

• If blown, confirm that the Fan Motor Unit is not locked and that coil

burnout has not occurred.

• Replace the Fuse Unit.

• Replace the Fan Motor Unit.

• To check continuity, remove the

Gasket V from the terminals.

After checking, fit new Gasket V.

AMC56L-1800P

C Fan Motor Unit • Check continuity between the terminals of the Fan Motor Unit.

• Check the wear state of the carbon brushes (abnormal wear of just

one of the brushes etc.)

• Check there is no roughness on the faces of the commutator etc.

• Replace the Fan Motor Unit.

• When replacing the Fan Motor Unit,

be sure to change the Gasket V on

the terminals.

• To check continuity, remove the

Gasket V from the terminals.

After checking, fit new Gasket V.

AMC56L-1800P

D Dust Compartment

Unit

(Filters)

• Dispose of the dust in the Dust Compartment Unit.

• Clean each of the Filters.

• Clean or replace.

Filter Unit

Dust Compartment Filter Kit

E Hose Unit

Nozzle Assy

• Check for deformation, cracking, and blockage of the Hose Unit.

• Check for blockage of the Nozzle Assy.

• Replace the Hose Unit.

Remove the dust from the Hose

Unit, or Nozzle Assy.

F Belt • Check for missing teeth, tearing etc. • Replace the Belt

G P.C.B. E Unit

Lead Wire G Unit

• Check for cracking of the P.C.B, damage to the electronic

components, soldering defects, broken lines etc.

• Check the insertion state of connector housings.

• Check continuity between terminals A-B of the Lead Wire G Unit.

• Replace the P.C.B. E Unit.

• Replace the Lead Wire G Unit.

Inspection

code Inspection part Inspection method Remedy

3.3. Safety Device

Under the following types of use, the Safety Device (Thermal Protector or Overload Protection) will trigger, stopping the unit and

preventing further operation.

H Nozzle Wand Unit • Insert the connector of the Nozzle Wand Unit into the P.C.B. E Unit

and check the continuity between the following terminals with the

pipe portion down.

• Terminal C-Terminal E

• Terminal D-Terminal F

• Replace the Nozzle Wand Unit.

Inspection

code Inspection part Inspection method Remedy

4 Disassembly and Assembly Instructions

* Attention

(1) When disassembling the vacuum cleaner, check the connections and wiring (pulling) of each component, and ensure

that everything is restored correctly once repairs are complete.

(2) Handle all disassembled components and packing with care, and be sure to replace any components that may be acci-

dentally damaged.

(3) Once repair operations are complete, always inspect the area around the repairs for any degradation, and ensure that

all components that were removed for repair have been replaced in the correct wiring configurations. It is also necessary

to test the operation of the vacuum cleaner and ensure that it is safe for subsequent use.

• Insulation resistance:

Must be at least 5MΩwhen a direct current of 500V is applied between the power plug terminals and the exterior of the motor.

• Dielectric strength:

Must be able to withstand 1250V of alternating current applied between the power plug terminals and the exterior of the motor for

one minute.

(4) Do not make changes to models, components, or materials during repairs and services.

(5) If a wiring unit has been supplied as a spare part, the wiring unit must be simply replaced as it is, without any addi-

tional repairs or connections made to even part of the wiring.

(6) Insert/remove the fast-on terminals by pushing/pulling them straight out without jiggling them or applying unneces-

sary force.

4.1. Disassembly of the Body

1. Lift the handle of the Dust Compartment Unit and remove

the Dust Compartment Unit.

2. Using a flathead screwdriver, release the Stopper at the

right side of the Handle Unit, then remove the Hose Unit

from the Handle Unit.

3. Remove the Hose Unit from the Rear Body Unit while

pressing the protrusion at the bottom of the Hose Unit.

4. Press the Handle Lever and pull off the Handle Unit.

5. Remove the 2 screws of the Upper Body and the Front

Body.

6. Lift up the Suction Inlet Unit a little, then bring it down to

the rear and remove it.

7. Remove the 2 screws of the Handle, then pull both ends

of the Handle out to the side and remove it.

8. Press the Floor Nozzle Removal Button and remove the

Nozzle Assy.

9. Remove the 5 screws of the Rear Body Unit.

10. Remove the Body Plate Unit.

4.2. Replacement of the Fan Motor

Unit

1. Refer to the "Disassembly of the Body" page and disas-

semble the Body.

2. Remove the screw.

3. Hold the Motor Case Set and the Curved Pipe Unit and

remove them.

*Be careful not to pull on the lead wire and break it.

4. Peel off Gasket S and the Packing U, then use a flathead

screwdriver to release the two Tab Portions between the

Motor Case Set and the Curved Pipe Unit.

5. Remove the Curved Pipe Unit, Motor Case Set, Motor

Support Rubber (Front), and the Motor Support Rubber

Unit (Rear).

6. Remove the Faston terminal of the Fan Motor Unit, and

then remove the Noise Suppressor Unit.

*Hold down the lock and remove.

*After attaching the Faston terminal, wrap with

Gasket V.

*When assembling, place the capacitor, thermal protector, and wire connector of the various lead wires in their origi-

nal positions.

*After engaging the Motor Case Set and the Curved Pipe Unit, stick Gasket S and the Packing U in their original posi-

tions. (If they cannot be reused, replace them.)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Staubsauger Handbücher

Panasonic

Panasonic MC-V7600 Bedienungsanleitung

Panasonic

Panasonic MC-UL429 Bedienungsanleitung

Panasonic

Panasonic MCV5740 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-CL934E Bedienungsanleitung

Panasonic

Panasonic MCGG283 - COMMERCIAL VACUUM - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MCUG581 - PLATINUM UPRIGHT VAC Bedienungsanleitung

Panasonic

Panasonic MCV5237 - UPRIGHT VACUUM-QKDR Bedienungsanleitung

Panasonic

Panasonic MCUL675 - UPRIGHT VAC - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MC-CJ913-Y747 Bedienungsanleitung

Panasonic

Panasonic MC-9040 Bedienungsanleitung

Panasonic

Panasonic MC-CG524 Bedienungsanleitung

Panasonic

Panasonic MCUG471 - UPRIGHT VAC - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MC-CG711A249-AE Bedienungsanleitung

Panasonic

Panasonic MC-CG683-ZC79 Bedienungsanleitung

Panasonic

Panasonic MC-UL427 Bedienungsanleitung

Panasonic

Panasonic MCUG581 - PLATINUM UPRIGHT VAC Bedienungsanleitung

Panasonic

Panasonic MC-SBM20 Bedienungsanleitung

Panasonic

Panasonic mc-ul592 Bedienungsanleitung

Panasonic

Panasonic MC-E472E Bedienungsanleitung

Panasonic

Panasonic MC-V5006 Bedienungsanleitung

Panasonic

Panasonic MC-CJ915 Bedienungsanleitung

Panasonic

Panasonic MC-UG775-00 Bedienungsanleitung

Panasonic

Panasonic Quickdraw MC-V7389 Bedienungsanleitung

Panasonic

Panasonic MCV5017 - UPRIGHT VACUUM-QKDR Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung