Panasonic MC-YL699-S146 Bedienungsanleitung

ing and distribution is a violation of law.

Order Number VCB0905004CE

Vacuum Cleaner

Model No.

MC-YL699-S146

MC-YL699-S346

MC-YL699-S149

MC-YL699-S747

MC-YL699-S147

Product Color : Black &Silver

Destination : 1.General --------------YL699-S146

2.Egypt -----------------YL699-S346

3.Iran --------------------YL699-S149

4.Saudi Arabia --------YL699-S747

Kuwait

5.UAE -------------------YL699-S147

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ----------------------------------------------------- 2

2 Location of Controls and Components ------------------- 3

3 Troubleshooting Guide ----------------------------------------- 5

4 Disassembly and Assembly Instructions ---------------- 6

4.1. Main body and the dust box separation-------------- 6

4.2. Motor removal ---------------------------------------------- 6

4.3. Air outlet cover unit removal ---------------------------- 8

4.4. Main switch (with fuse) removal ----------------------- 8

4.5. Fuse replacement ----------------------------------------- 9

4.6. Power cord replacement--------------------------------- 9

4.7. Indicator pipe unit removal ------------------------------ 9

4.8. Cloth bag unit removal ----------------------------------10

5 Wiring Connection Diagram ---------------------------------11

6 Schematic Diagram ---------------------------------------------11

7 Exploded View and Replacement Parts List ----------- 12

7.1. EXPLODED VIEW (ATTACHMENTS) -------------- 12

7.2. PARTS LIST (ATTACHMENTS) ---------------------- 12

7.3. EXPLODED VIEW (BODY UNIT)-------------------- 13

7.4. PARTS LIST (BODY UNIT)---------------------------- 14

7.5. PACKING INSTRUCTIONS --------------------------- 15

7.6. PACKING LIST ------------------------------------------- 16

1 Specifications

Specifications are subject to change without notice for further improvement.

Model No. MC-YL699

Motor power 2100W

Dust capacity 20.0L

Cord Length 8.0m

Weight (With Attachments) 7.2kg

Extension Wand METAL ×2

Blower Operation l

Floor Nozzle 2-Step

Dimensions (WxLxH) 584mm x 340mm x 366mm

Attachments Crevice Tool / Upholstery Nozzle

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECKPOINT METHOD OF INSPECTION CAUSE / REMEDY

Motor fails to rotate when it is

switched on

Meltdown of fuse unit Check fuse continuity.

(Visual and conduction check)

Replace the main switch (with

fuse).

*Check the motor at same

time.

There may be the possibility

of a motor problem

Continuity of power cord unit Check power supply cord continu-

ity.

Check the continuity between

1. Lead wire connection of

main unit switch

2. Lead wire connection termi-

nal of the motor

and the blades of the plug

using a tester.

Replace the power cord unit

Continuity of the switch Check with tester between both ter-

minals on the switch, while turning

switch ON/OFF.

If there is no continuity, replace the

main switch (with fuse).

Check of the motor connection

faston terminals

Check if it is securely connected by

pulling on the lead wire.

Securely connect.

Continuity of the motor Check the continuity between both

terminals (1.Orange connection of

lead wire 2.Brown connection of

lead wire) (lead wire connection

terminal) of the motor.

If there is not continuity, replace

motor set.

(Disconnection of the coil inside the

motor)

Wearing of the carbon brush Visually check if one side of the

carbon brush is worn out abnor-

mally.

Replace motor set.

Suction is weak Clogging in extension pipe /

nozzle assy / hose assy

Check for clogging in each part Remove dust or replace parts

Clogging in the cloth bag / filter

of the dust compartment

Check for clogging in each part Clean

Abnormal sound Indicator pipe unit

(Air protector)

Is it full of dust?

Clogging

Clean

Remove dust from each parts

Motor Problem with the motor or carbon

brush

Replace the motor set.

4 Disassembly and Assembly Instructions

Caution:

1. When disassembling, check the component fitting state and wirings. After repairing, always restore them to the original state.

2. Carefully handle the removed components, packing, etc. If they are damaged, then replace them with new ones.

3. After repairing, check that the components, etc., in the vicinity of the repaired sections are not damaged, the removed compo-

nents are in place, and the wirings are restored to the original state. Carry out the test run. Also check that the following

requirements are met.

• Insulation resistance

Must be 5 Ωor more when a DC voltage of 500 V is applied across the power plug and the motor core for one second.

• Dielectric strength

Must withstand an AC voltage of 1,250 V applied across the power plug and the motor core for one minute.

4. Do not alter the model, parts, or materials during repair.

5. If a wiring unit is supplied as a repair part, replace the whole unit with the new one instead of repairing or reconnecting the

broken portions only.

6. Insert/remove the fast-on terminals by pushing/pulling them straight out without jiggling them or applying unnecessary force.

4.1. Main body and the dust box

separation

1. Remove the buckle, and remove the main body from the

dust compartment.

4.2. Motor removal

1. Flip the main body, and remove the 4 screws holding the

upper body unit with the body cover unit, and remove the

upper body.

2. Separate the motor from the body cover.

When mounting, align form of the motor support rub-

ber (rear) unit with form of the body cover connection

3. Remove the lead wires by shifting the noise suppressor

unit.

* Take care not to damage the noise suppressor when

shifting the noise suppressor unit.

* There is a tape (glass tape) wrapped on the faston

terminals, and when removing the faston terminals,

press on to the protrusion on the faston terminal

(arrow) as shown in fig. 5.

It can be removed by pressing on the tape from

above.

* When mounting the motor, make sure to wrap the

faston terminals of the connected lead wires with the

protection tape B (glass tape).

4. Remove the noise suppressor unit, the motor support

rubber (front), and the motor support rubber (rear) unit.

4.3. Air outlet cover unit removal

1. Peel off the exhaust packing unit and remove the air out-

let cover unit.

* Locations of parts mounted to air outlet cover unit

4.4. Main switch (with fuse)

removal

1. Remove the 2 screws mounting the handle.

2. Flip the body cover and remove the handle.

3. Remove the main switch and replace with the new main

switch.

* Main switch has a fuse built-in.

Also, there are tapes (glass tapes) wrapped on each

part.

4.5. Fuse replacement

* Fuse is supplied by the main switch (with fuse)

4.6. Power cord replacement

1. Cut the lead wires at the root of the crimp contact and

remove the power cord.

* Make sure to wrap the crimp contact with the pro-

tection tape B (glass tape) after replacement.

2. Place the new power cord between the ribs of the body

cover unit, and connect the wires with crimp contact.

* Use the dedicated tool to crimp the crimp contact

* Wrap the crimp contact with the protection tape B

(glass tape).

4.7. Indicator pipe unit removal

1. Remove the 1 screw mounting the indicator pipe unit with

the body upper unit, and remove the indicator pipe unit.

4.8. Cloth bag unit removal

1. Remove the cloth bag unit from the expander.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Staubsauger Handbücher

Panasonic

Panasonic MC-V7600 Bedienungsanleitung

Panasonic

Panasonic MC-CL481 Bedienungsanleitung

Panasonic

Panasonic MC-YL697 Bedienungsanleitung

Panasonic

Panasonic MC-CL676-ZC79 Bedienungsanleitung

Panasonic

Panasonic MC-SBM20 Bedienungsanleitung

Panasonic

Panasonic MCV5210 - COMMERCIAL VACUUM Bedienungsanleitung

Panasonic

Panasonic MCV5320 - UPRIGHT VACUUM-QKDR Bedienungsanleitung

Panasonic

Panasonic MC4850 - CANISTER VACUUM Bedienungsanleitung

Panasonic

Panasonic MCV5261 - UPRIGHT VACUUM PLAT Bedienungsanleitung

Panasonic

Panasonic QuickDraw MC-V7388 Bedienungsanleitung

Panasonic

Panasonic mc-ul592 Bedienungsanleitung

Panasonic

Panasonic QuickDraw MC-V5355 Bedienungsanleitung

Panasonic

Panasonic MC-3920 TAIWAN Bedienungsanleitung

Panasonic

Panasonic MC-V9625C Bedienungsanleitung

Panasonic

Panasonic MCV7395 - UPRIGHT VACUUM-QKDR Bedienungsanleitung

Panasonic

Panasonic MC-E3002-WP47 Bedienungsanleitung

Panasonic

Panasonic MC-UG327 Bedienungsanleitung

Panasonic

Panasonic MCV7347 - UPRIGHT VACUUM-QKDR Bedienungsanleitung

Panasonic

Panasonic MC-CG371 Bedienungsanleitung

Panasonic

Panasonic Ultra-Pro MC-V200 Bedienungsanleitung

Panasonic

Panasonic MC-YL798 Bedienungsanleitung

Panasonic

Panasonic MCV7720 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-UL815 Bedienungsanleitung

Panasonic

Panasonic MCU-L426 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung