ParaBody GS2 Bedienungsanleitung
1
LEG PRESS ADAPTER KIT
CLASS H
PART#7358101
REV. A Revision: 11/01/02
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
FOR GS1/GS2 GYM SYSTEM
Version: GS1-LP5A-101
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
NOTE: In a continual effort to improve our products, specifications are subject to change
2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Parts list..........................4
Assembly Instructions.....4-13
Insert-Registration Card
©
IMPORTANT NOTES
Please note:
Tools Required for Assembly
* Thank you for purchasing the ParaBody GS1/ GS2 Leg PressAdapter Kit. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* 9/16” wrench
* Ratchet with 9/16” socket
*Adjustable wrench
* Tape measure
3
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OFTHE HEAD OF THE BOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
PARTS LIST
4
NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM
SYSTEMS
PART #
ACU04-1450
ACU13-0140
ACU06-0024
ACU06-0362
ACUDC1250100020B
ACUDB2E03811000B
ACUDA1E03813416NB
QTY
1
1
7
1
9
14
3
PART #
ACUDA1E03823416NB
ACUDA1E03840016NB
ACUDA1E03843416NB
ACU08-0085
ACU08-0076
ACU08-0079
ACU02-0055
DESCRIPTION
3/8X2-3/4”BOLT
3/8X4” BOLT
3/8X4-3/4”BOLT
STEPSPACER19/32”LG
STEPSPACER1-19/32”LG
STEPSPACER1-11/16”LG
CABLELCLIP
QTY
4
2
5
4
4
2
1
DESCRIPTION
FRONTLEG
LEGPRESSCABLE
3-1/2”PULLEY
2”COVERCAP
3/8”WASHER
3/8”LOCKNUT
3/8X1-3/4”BOLT
KEY
8
9
10
11
12
13
14
KEY
1
2
3
4
5
6
7
FIGURE 1
STEP 1:
• Remove and discard the LEG CABLE by removing the bolts shown in FIGURE 1.
DISCARD!
CABLE
• Remove the bolts attaching the FRAME BRACE and CABLE to the BASE as shown in figure 1
5
0123456
1/2 1/2 1/2 1/2 1/2 1/2
• If not already installed, slide one 2” COVER CAP (4) over the FRONT LEG (1) as shown in FIGURE 8
FIGURE 2
STEP 2:
• SECURELY assemble the FRONT LEG (1) to the GS1/GS2 Gym System using two 3/8 X 4” BOLTS (9), four 3/8” WASHERS
(5),two LOW HEIGHT 3/8”LOCK NUTS (6)asshown in FIGURE2.
9 3/8 X 4”
6
5
1
4
FIGURE 3
STEP 3:
• Assemble the new LEG PRESS CABLE (2) using the previously removed bolts as shown in FIGURE 3. (NOTE: Make sure the
LEG PRESS CABLE is running in the grooves of all pulleys and above the retaining bolts.)
6
2
FIGURE 4
STEP 4:
7
1
6
3
• SECURELY assemble one 3-1/2” PULLEY (3) to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK
NUT (6). See FIGURE 4.
2
7 3/8 X 1-3/4”
0123456
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 5
STEP 5:
8
• SECURELY attach the LP5 LEG PRESS to the FRONT LEG (1) using two 3/8” X 2-3/4” BOLTS (8), two 3/8” WASHERS (5),
and two 3/8” LOCK NUTS (6). See FIGURE 5.
1
6
5
8 3/8 X 2-3/4”
FIGURE 6
STEP 6:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (7), one 3/8” WASHER (5), one CABLE CLIP (14) and
one 3/8” LOCK NUT (6) as shown in FIGURE 6. Make sure the CABLE is in the grooves of all the pulleys.
SEAT FRAME
6
5
2
3
7 3/8 X 1-3/4”
14
BRACKET
9
0123456
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 8
STEP 8:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 8. Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 7
3
2
6
SEAT FRAME
FIGURE 7
STEP 7:
6
SEAT FRAME
• SECURELYattachtheBRACKET(from LP5LEG PRESS) totheSEATFRAME using two3/8” X 4-3/4”BOLTS (10),two 3/8”
WASHERS(5),andtwo 3/8” LOCK NUTS (6). See FIGURE7.
BRACKET
5 10
3/8 LOCKNUT
3/8X 4-3/4”
FIGURE 9
STEP 9:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the SEATFRAME using one 3/8 X 4-3/4” BOLT (10), two STEPSPACERS 1-19/32” (12) and one 3/8” LOCK NUT (6) as shown in
FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.
3/8X 4-3/4” 10
3
2
6
12
MAIN ARM
FIGURE 10
STEP 10:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3)
to the MAINARM using one 3/8 X 2-3/4” BOLT (8), two STEPSPACERS 19/32” (11) and one 3/8” LOCK NUT(6) as shown in
FIGURE 10. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 8
3
2
6
11
3/8 LOCKNUT
10
SEAT FRAME
Andere Handbücher für GS2
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere ParaBody Heim-Fitnessstudio Handbücher
ParaBody
ParaBody PBF206 Installationsanleitung
ParaBody
ParaBody PBF410A Bedienungsanleitung
ParaBody
ParaBody PBF460 Bedienungsanleitung
ParaBody
ParaBody PBF011AB Bedienungsanleitung
ParaBody
ParaBody Serious Steel 812102 Bedienungsanleitung
ParaBody
ParaBody Parabody 660101 Bedienungsanleitung
ParaBody
ParaBody 897104 Bedienungsanleitung
ParaBody
ParaBody GS6 Bedienungsanleitung
ParaBody
ParaBody 950102 Bedienungsanleitung
ParaBody
ParaBody 360101 Bedienungsanleitung
ParaBody
ParaBody 458 Bedienungsanleitung
ParaBody
ParaBody 880 Bedienungsanleitung
ParaBody
ParaBody PBF072 Bedienungsanleitung
ParaBody
ParaBody 76 Bedienungsanleitung
ParaBody
ParaBody 855 AB Bedienungsanleitung
ParaBody
ParaBody 895101 Bedienungsanleitung
ParaBody
ParaBody PBF351 Bedienungsanleitung
ParaBody
ParaBody Serious Steel 400102 Bedienungsanleitung
ParaBody
ParaBody 843 Bedienungsanleitung
ParaBody
ParaBody 701 Bedienungsanleitung
Beliebte Heim-Fitnessstudio Handbücher anderer Marken
Horizon Fitness
Horizon Fitness OXFORD 6 Bedienungsanleitung
Energetics
Energetics Multi Trainer 5.1 Bedienungsanleitung
Matrix
Matrix MG-PL Series Bedienungsanleitung
Reebok
Reebok Tbr2i Bedienungs- und Wartungshandbuch
Weider
Weider 8300 Hard Drive Bedienungsanleitung
Pure Fitness
Pure Fitness 8526HE Bedienungsanleitung
