PEERLESS HL4UN-002 Leitfaden

1 of 2 ISSUED: 06-03-11 SHEET #:120-9110-1

Insert two 1/4-20 x 1-3/4" carriage bolts (A)

into bottom of display base as shown in detail 1.

Model: HL4UN-002, HL4UN-002-Q10

Installation and Assembly:

Lock Down Hardware for Display Base Stands

BOTTOM OF BASE

FRONT

A B

DETAIL 1

MEASURE

DISTANCE

Measure distance between center lines of cut outs in

bottom of display base. Use measurement to mark

location of holes at point 1 and point 2, on table.

Drill two holes using a 9/32'' drill bit.

POINT 1

POINT 2

• drill

• 9/32" drill bit

• 5/8" open box wrench

E F G

HTOOLS NEEDED

HL4UN-002 HL4UN-002-Q10

Description Qty. Part # Qty. Part #

1/4-20 x 1 3/4" carriage bolt 2 520-1017 20 520-1017

BM4 x 16 mm phillips trilobe screw 2 520-2621 20 520-2621

CM4 x 16 mm socket pin screw 2 520-1087 20 520-1087

D1/4-20 sloped nut 3 530-0035 23 530-0035

EM4 x 12 mm socket pin screw 2520-1079 20 520-1079

F#8 flat washer 2540-1001 20 540-1001

Gplastic cap 2590-1294 20 590-1294

H4 mm allen wrench 1 560-9646 3 560-9646

Parts List

NOTE: Display and base may appear

different than illustrated

2 of 2 ISSUED: 06-03-11 SHEET #:120-9110-1

Hand tighten slope nut (D) through 1/4-20 x 1-3/4" carriage bolt (A) until snug against bottom of desktop surface.

Thread another slope nut (D) upside-down, about two turns from rst slope nut (D). Insert an open box wrench

between both slope nuts (D) and tighten. NOTE: Avoid jamming both slope nuts (D) together, doing so may make

it difcult to remove slope nut used for tightening rst slope nut (D) as shown in gure 3.1. After slope nut is secure

remove bottom slope nut as shown in gure 3.2. Repeat with remaining 1/4-20 x 1 3/4" carriage bolt (A).

Fasten two plastic caps (G).

TIGHTENING

SLOPE NUT

BOTTOM OF DESKTOP

FIGURE 3.1 FIGURE 3.2

NOTE: Do not overtighten slope nut (D)

plate may distort

FRONT

Thread two M4 x 16 phillips pan trilobe screws (B) to bottom display attachment holes as shown in g. 4.1.

Remove the two M4 x 16 phillips pan trilobe screws (B) and attach display screen to display base using two M4 x

16 mm socket pin screws (I) or M4 x 12 mm socket pin screws (E) with #8 at washers (F), as shown in gure 4.2.

Tighten with 4 mm security allen wrench (H). Use TV supplied screws for remaining holes.

g 4.1 g 4.2

DISPLAY SCREEN DISPLAY SCREEN

DISPLAY BASE

NOTE: Display and base may appear

different than illustrated

NOTE: Screws are installed using bottom

two display mounting locations.

Installation of Security Screws for Base/Screen Assembly

C or E

• If screws don’t get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly

secured, damage may occur to screen or product may fail.

WARNING

All other brand and product names are trademarks or registered trademarks of their respective owners.

Dieses Handbuch passt für folgende Modelle

Andere PEERLESS Rack & Stand Handbücher

PEERLESS

PEERLESS ACC605 Leitfaden

PEERLESS

PEERLESS Solid-Point PLB 1 Leitfaden

PEERLESS

PEERLESS Smartmount D-FPF-220 Leitfaden

PEERLESS

PEERLESS Smartmount SA752P Leitfaden

PEERLESS

PEERLESS MSA-301 Leitfaden

PEERLESS

PEERLESS SlimLine MOWV241/BK Bedienungsanleitung

PEERLESS

PEERLESS VPM 25-W Leitfaden

PEERLESS

PEERLESS ACC951 Leitfaden

PEERLESS

PEERLESS Paramount PS200 Leitfaden

PEERLESS

PEERLESS Paramount PT650 Leitfaden

PEERLESS

PEERLESS PLAV 70 Leitfaden

PEERLESS

PEERLESS LCT Series Leitfaden

PEERLESS

PEERLESS DMU50SM Leitfaden

PEERLESS

PEERLESS SmartMount D-FPF-320 Leitfaden

PEERLESS

PEERLESS PLA 60-UNL Leitfaden

PEERLESS

PEERLESS PM 47 Leitfaden

PEERLESS

PEERLESS IB40 Leitfaden

PEERLESS

PEERLESS FPZ-600 Leitfaden

PEERLESS

PEERLESS MIS 213 Leitfaden

PEERLESS

PEERLESS LCT-202 Leitfaden

PEERLESS

PEERLESS RTPLA 50 Leitfaden

PEERLESS

PEERLESS HDS-S Leitfaden

PEERLESS

PEERLESS CMJ 470W Leitfaden

PEERLESS

PEERLESS DS-VW760 and assembly Leitfaden

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung