PerkinElmer CLARUS 600 GC Bedienungsanleitung

Clarus 600 GC Installation

Guide

Release History

Part Number Release Publication Date

09936779 A November 2006

Any comments about the documentation for this product should be addressed to:

User Assistance

PerkinElmer, Inc.

710 Bridgeport Avenue

Shelton, Connecticut 06484-4794

U.S.A.

Or emailed to: info@perkinelmer.com

Notices

The information contained in this document is subject to change without notice.

Except as specifically set forth in its terms and conditions of sale, PerkinElmer makes

no warranty of any kind with regard to this document, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose.

PerkinElmer shall not be liable for errors contained herein for incidental consequential

damages in connection with furnishing, performance or use of this material.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this publication may be reproduced in any form

whatsoever or translated into any language without the prior, written permission of

PerkinElmer, Inc.

Produced in the U.S.A.

Trademarks

Registered names, trademarks, etc. used in this document, even when not specifically

marked as such, are protected by law.

PerkinElmer is a registered trademark of PerkinElmer, Inc.

Clarus is a trademark of PerkinElmer, Inc.

Table of Contents

Introduction .................................................................................................. 5

About This Manual......................................................................................... 7

Conventions Used in this Manual................................................................... 8

Electromagnetic Compatibility (EMC)........................................................... 9

Warning Labels on the Instrument ............................................................... 11

Safety Practices ........................................................................................... 17

Precautions.................................................................................................... 21

Environmental Conditions ............................................................................ 22

Electrical Safety............................................................................................ 24

Moving the Clarus 600 GC........................................................................... 27

ECD Radioactive Hazards ............................................................................ 27

Safe Handling of Gases ................................................................................ 31

Hazardous Chemicals ................................................................................... 34

Definitions in Warning for Hazardous Chemicals........................................ 35

Preparing Your Laboratory ...................................................................... 37

Critical Checks Prior to Installation ............................................................. 39

Connect the Electrical Supply ...................................................................... 40

Checking Heater Selection ........................................................................... 51

Preparing the Laboratory .............................................................................. 52

Clarus 600 GC Requirements ....................................................................... 56

Installing the Clarus GC ............................................................................ 61

Install the Autosampler................................................................................. 63

Remove the Encoder Protector Block........................................................... 63

Install the Autosampler Tower ..................................................................... 64

Install the Autosampler Tower Cover........................................................... 69

Install the Syringe Cover .............................................................................. 72

Connecting the Gas Supply........................................................................ 75

Connect the Gases ........................................................................................ 77

Clarus 600 GC Gas Connections .................................................................. 81

Common Injector/Detector Gas Connections............................................... 84

Connecting the Accessories........................................................................ 93

Install the NPD Bead Assembly ................................................................... 95

PPC Restrictor Information .................................................................... 101

Index .......................................................................................................... 107

Introduction 1

Clarus 600 GC Installation Guide

About This Manual

This quick installation guide is divided into following chapters:

Chapter 1 - Introduction

This chapter contains a brief introduction of the instrument, the conventions and

warnings used in the manual.

Chapter 2 - Safety Practices

Important safety information for the Clarus GC is provided in this chapter.

Chapter 3 - Preparing Your Laboratory

The preparation of your laboratory needed for the Clarus GC laboratory

requirements for the instrument are reviewed in this chapter.

Chapter 4 - Installing the Clarus GC

Information on connecting the Clarus GC is provided.

Chapter 5 - Connecting the Gases

Information on connecting the gases and electrical supply to the system is provided.

Chapter 6 - Connecting the Accessories

Information on installing accessories such as the NPD Bead Assembly, recorder,

integrator and the printer is provided.

Chapter 7 - PPC Restrictor Information

PPC restrictor information is provided in this chapter.

Introduction

Conventions Used in this Manual

¾Normal text is used to provide information and instructions.

¾Bold text refers to button or tab page that is displayed on the touch screen.

¾All eight digit numbers are PerkinElmer part numbers unless stated otherwise.

About Notes, Cautions and Warnings

Three terms, in the following standard formats, are also used to highlight special

circumstances and warnings.

NOTE: A note indicates additional, significant information that is provided with some

procedures.

CAUTION

We use the term CAUTION to inform you about situations that

could result in serious damage to the instrument or other

equipment. Details about these circumstances are in a box like

this one.

WARNING

We use the term WARNING to inform you about situations that

could result in personal injury to yourself or other persons.

Details about these circumstances are in a box like this one.

Customer Service

PerkinElmer, Inc.

710 Bridgeport Avenue

Shelton, CT 06484-4794 U.S.A

Tel: 1 (800) 762-4000 or (203) 762-4000

Internet: http://www.perkinelmer.com

Clarus 600 GC Installation Guide

Electromagnetic Compatibility (EMC)

United States (FCC)

This product is classified as a digital device used exclusively as industrial,

commercial, or medical test equipment. It is exempt from the technical standards

specified in Part 15 of the FCC Rules and Regulations, based on Section 15.103 (c).

European Union

All information concerning EMC standards will be in the Declaration of Conformity

and these standards will change as the European Union adds new requirements.

European Union Industrial Environment

The 220/230/240 V/50 Hz. Clarus GC has been manufactured for use in the

European Union and is intended for the industrial environment. The instrument is to

be connected to a mains power network supplied from a high or medium-voltage

transformer dedicated for the supply of an installation feeding a manufacturing or

similar plant.

Industrial environments are characterized by the existence of one or more of the

following conditions:

- industrial, scientific and medical (ISM) apparatus are present

- heavy inductive or capacitive loads are frequently switched

- currents and associated magnetic fields are high

These are the major contributors to the industrial electromagnetic environment and

as such distinguish the industrial from other environments. The instrument is not

intended for connection to a public mains network supplying residential, commercial

and light-industrial locations.

Susceptibility to RF Interference

With the exception of the Flame Ionization Detector (FID), a RF field strength of 10

V/m between 80 MHz. and 1000 MHz. with 80% modulation at 1 kHz. may cause a

deflection on the chromatographic detector baseline that exceeds its normal pattern.

This implies that if a transmitting device, such as a walkie-talkie carried by a security

Introduction

guard, is use near the detector, a spike or peak on the chromatographic baseline may

occur. If you are concerned that such an event may occur, PerkinElmer recommends

that walkie-talkie restriction notices be posted in the vicinity. Cell phones, beepers,

and other similar devices operate in a much higher frequency range and do not cause

interference.

Inhaltsverzeichnis

Andere PerkinElmer Laborausrüstung Handbücher

PerkinElmer

PerkinElmer Lambda 25 Bedienungsanleitung

PerkinElmer

PerkinElmer VesselVue Bedienungsanleitung

PerkinElmer

PerkinElmer Frontier Optica FT-IR Bedienungsanleitung

PerkinElmer

PerkinElmer IVIS Lumina XRMS III Series Bedienungsanleitung

PerkinElmer

PerkinElmer CLARUS 680 GC Bedienungsanleitung

PerkinElmer

PerkinElmer Raman IdentiCheck Bedienungsanleitung

PerkinElmer

PerkinElmer Lambda 365 Bedienungsanleitung

PerkinElmer

PerkinElmer Wallac 1420 Bedienungsanleitung

PerkinElmer

PerkinElmer IVIS Lumina S5 Bedienungsanleitung

PerkinElmer

PerkinElmer FT-IR Bedienungsanleitung

PerkinElmer

PerkinElmer TGA 8000 Montageanleitung

PerkinElmer

PerkinElmer Raman Flex 400 Series Bedienungsanleitung

PerkinElmer

PerkinElmer LAMBDA 265 Bedienungsanleitung

PerkinElmer

PerkinElmer SPECTRUM TWO N Bedienungsanleitung

PerkinElmer

PerkinElmer TriNEST Bedienungsanleitung

PerkinElmer

PerkinElmer Clarus SQ 8 MS Series Montageanleitung

PerkinElmer

PerkinElmer Lambda 365 Bedienungsanleitung

PerkinElmer

PerkinElmer Clarus SQ 8 MS Series Montageanleitung

PerkinElmer

PerkinElmer clarus 500 gc Bedienungsanleitung

PerkinElmer

PerkinElmer Migele Bedienungsanleitung

PerkinElmer

PerkinElmer OMNI Bead Ruptor Elite Bedienungsanleitung

PerkinElmer

PerkinElmer HATR Bedienungsanleitung

PerkinElmer

PerkinElmer FL 6500 Bedienungsanleitung

PerkinElmer

PerkinElmer RamanMicro 200 Series Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung