Philips AVENT SCF356/00 Bedienungsanleitung

www.philips.com/avent

Philips Consumer Lifestyle BV

Tussendiepen 4, 9206 AD Drachten, Netherlands

Trademarks owned by the Philips Group.

www.philips.com

User manual

4213 354 36704

2345

6789

10 11 12 13

14 15 16 17

18 19 20 21

22 23 24 25

26 27

SCF356

ENGLISH 6

ESPAÑOL 18

FRANÇAIS (CANADA) 31

PORTUGUÊS DO BRASIL 44

ENGLISH

66ENGLISH

General description (Fig. 1)

1 Baby bottle warmer

2 Progress indicator

3 Settings and on/off knob

4 Defrost setting

5 Milk warming setting 1

6 Milk warming setting 2

7 Milk warming setting 3

8 Baby food warming setting

9 On/off button

IMPORTANT

SAFEGUARDS

To fully benet from the support that Philips offers, register your

appliance at www.philips.com/welcome.

Read this user manual carefully before you use the baby bottle warmer

and save it for future reference.

Warning

- Read all instructions.

- Do not use outdoors.

- To protect against re, electric shock and injury to persons do not

immerse the cord, plug or appliance in water or other liquid.

- Do not let cord hang over the edge of table or counter, or touch hot

surfaces. Excess cord can be stored in the base of the baby bottle

warmer.

- This appliance has a polarized plug (one blade is wider than the

other). To reduce the risk of electric shock, this plug is intended to t

into a polarized outlet only one way. If the plug does not t fully into

the outlet, reverse the plug. If it still does not t, contact a qualied

electrician. Do not attempt to modify the plug in any way.

- Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

ENGLISH

- A short power-supply cord should be used to reduce the risk

resulting from becoming entangled in or tripping over a longer cord.

Extension cords are available and may be used if care is exercised in

their use. If an extension cord is used, the marked electrical rating of

the cord set or extension cord should be at least as great as the

electrical rating of the appliance, and the cord should be arranged so

that it will not drape over the countertop or tabletop where it can

be pulled on by children or tripped over unintentionally.

- Do not operate any appliance with a damaged cord or plug or after

the appliance malfunctions, or has been damaged in any manner.

Return appliance to the nearest authorized service facility for

examination, repair or adjustment.

- The use of accessory attachments not recommended by the

appliance manufacturer may cause injuries.

- Do not place the appliance on or near a hot gas or electric burner, or

in a heated oven.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

- Close supervision is necessary when any appliance is used by or near

children.

- Keep the appliance and its cord out of reach of children.

- Do not preheat the appliance.

- Always place a fully assembled bottle with cap in the baby bottle

warmer before you add water.

- Make sure you add water before you switch on the baby bottle warmer.

- Hot water can cause serious burns. Be careful when the baby bottle

warmer contains hot water.

- Extreme caution must be used when moving an appliance containing

hot oil or other hot liquids.

- Do not touch hot surfaces. Use handles or knobs.The accessible

surfaces may become hot during use.

- Do not move the appliance when it contains hot water.

ENGLISH

- Do not place the appliance on an enclosed surface (e.g. a serving

tray), as this could cause water to accumulate under the appliance,

resulting in a hazardous situation.

- Before serving be sure the food is at safe temperature.

- Before serving, unplug the cord from the wall outlet and dish. Do not

leave the cord within child’s reach.

- Always press the on/off button to “off” before you remove the plug

from the wall outlet.

Caution

- This appliance is intended to be used in household and similar

applications such as farm houses, bed and breakfast type

environments, staff kitchen areas in shops, ofces and other working

environments, and by clients in hotels, motels and other residential

type environments.

- Unplug from outlet when not in use and before cleaning.Allow to

cool before putting on or taking off parts, and before cleaning the

appliance.

- Follow the descaling instructions to avoid irreparable damage.

- Do not try to open or repair the appliance yourself. You can contact

the Philips Consumer Care Centre in your country

(see www.philips.com/support).

- Do not use appliance for other than intended use.

SAVE THESE

INSTRUCTIONS.

You can nd the production date code YYWW in the cord storage

compartment in the base of the baby bottle warmer.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and

regulations regarding exposure to electromagnetic elds.

ENGLISH

Using the baby bottle warmer

With this baby bottle warmer, you can safely warm and defrost milk in

Philips Avent feeding bottles and milk or baby food in containers.

The baby bottle warmer helps to preserve the valuable nutrients and

vitamins in breast milk because it never overheats the milk. If milk

becomes too warm, nutrients and vitamins are damaged.To help preserve

the quality of your breast milk, it is important to heat the milk in a safe

and controlled way.The baby bottle warmer is designed to warm gently

and evenly and to avoid hot spots, as the milk circulates during warming.

The built-in sensor tracks and controls the milk temperature, to avoid

overheating at all times.

Note: Philips Avent breast milk bags and Philips Avent 2oz/60ml bottles

cannot be used in this baby bottle warmer.

Explanation of settings

- You can choose between the following settings: (Fig. 2)

- Defrost setting:To defrost a bottle or container with frozen milk or

frozen baby food. No warming occurs.

- Milk warming settings: Select one of these settings when you want to

warm a bottle of milk to a safe temperature. Setting 2 warms your

milk to approximately body temperature. Setting 1 warms your milk

to a slightly lower temperature and setting 3 warms your milk to a

slightly higher temperature.

- Baby food warming setting: Select this setting when you want to

warm a container or jar with baby food.

Using the baby bottle warmer to warm milk

1 Put the mains plug in the electrical outlet (Fig. 3).

2 Place a bottle centrally in the baby bottle warmer (Fig. 4).

Note:To warm milk in a milk storage container, follow the same steps as

indicated for warming milk in a bottle.

3 Fill the baby bottle warmer with the same amount of drinking

water as the amount of milk you want to warm up (for example, to

warm up 125ml/4oz of milk, you need to use 125ml/4oz of drinking

ENGLISH

water). If you want to heat up a large amount of milk (>180ml/6oz),

the maximum water level is approximately 1cm/0.4 inches under

the rim of the baby bottle warmer (which corresponds to adding

160ml/4.5oz of drinking water).An accurate water level ensures

correct warming performance. (Fig. 5)

4 Select the desired setting (Fig. 6).

Note: Experience teaches that babies may have a preference for a specic

milk temperature.This can be due to personal preference or external factors

(e.g. environment temperature).All three settings ensure that the milk is

warmed to a safe temperature which is comfortable for your child and helps

to preserve the nutrients and vitamins in the milk.

5 Press the on/off button to turn on the appliance.The light in the

button lights up to indicate that the baby bottle warmer is on (Fig. 7).

Note:The baby bottle warmer starts warming up right after you press the button.

6 Theprogressindicatorstartstollupgraduallywithwhitelightto

show the progress of the milk warming process (Fig. 8).

Note:The progress indicator shows the progress of the milk warming process.

The progress indicator starts ashing when the appliance is on. When the rst

warming phase has been completed, the bottom segment lights up continuously

and the next segment starts ashing to show that the second warming phase is

in progress.These steps continue until the third warming phase has been

completed.Then the entire progress indicator lights up continuously.

Note: During the warming process, the milk circulates to ensure even

warming. It takes about 10 minutes to warm 90ml/3oz of room-temperature

milk. It takes slightly longer to warm cold milk or a large amount of milk.

Caution: Do not take the bottle out of the baby bottle warmer while

theprogressindicatorisashing.

7 When the entire progress indicator lights up continuously, the milk

has reached the set temperature.

,When the milk is warm, you can either take the bottle out of the

baby bottle warmer to feed your baby right away (see section

ENGLISH

‘Feeding your baby immediately’) or you can keep it warm in the

baby bottle warmer (see section ‘Keeping milk warm’).

Increasing the milk temperature

1 If you want the milk to be warmer, you can increase the milk

temperature gradually after it is ready by turning to milk warming

setting 3 and leaving the bottle in the appliance at the keep-warm

mode (Fig. 9).

2 If you just turned off the baby bottle warmer or if it just turned off

automatically, turn it back on without removing the warm water

from it, and follow the above step (Fig. 10).

3 The baby bottle warmer turns off automatically after 20 minutes

of keep-warm mode (Fig. 11).

Feeding your baby immediately

1 Press the on/off button to turn off the appliance and take out the

milk bottle (Fig. 10).

2 Always check the temperature of the milk before you feed your baby.

Gently swirl the milk in the bottle and check the temperature of the

milk by sprinkling a few drops on the inside of your wrist (Fig. 12).

3 Unplug the appliance and empty the baby bottle warmer (Fig. 13).

Keeping milk warm

1 When the milk has reached the desired temperature, the baby

bottle warmer automatically turns to the keep-warm mode. In this

mode, the milk is kept at the set temperature for 20 minutes (Fig. 14).

2 The baby bottle warmer turns off automatically after 20 minutes.

The progress indicator turns off to indicate that the milk is not

kept at the desired temperature anymore (Fig. 11).

Note: If you want to feed your baby with milk at the set temperature, you

need to take the milk bottle out of the baby bottle warmer and feed it to

your baby right after the baby bottle warmer turns off, otherwise the milk

cools down.

ENGLISH

Note:You cannot prolong the keep-warm mode of the baby bottle warmer

for more than 20 minutes.

Caution: It is not recommended to reheat breast milk twice, as bacteria

start to develop in the milk.

3 Always check the temperature of the milk before you feed your

baby. Gently swirl the milk in the bottle or milk storage container

and check the temperature of the milk by sprinkling a few drops on

the inside of your wrist (Fig. 12).

4 Unplug the appliance and empty the baby bottle warmer (Fig. 13).

Re-using the baby bottle warmer right away for

another bottle

If you want to heat up another bottle right away, let the baby bottle

warmer cool down for a few minutes. To speed up this process, ll the

baby bottle warmer with fresh cold water. When you turn on the baby

bottle warmer, the progress indicator starts ashing from bottom to top

to indicate that the appliance is heating up again.

Note: If the progress indicator is on but does not ash, the baby bottle

warmer is still too warm to heat up another bottle. Please turn off the baby

bottle warmer, let it cool down for a few minutes and make sure you ll it

with fresh cold water.

Using the baby bottle warmer to warm baby food

1 Put the mains plug in the electrical outlet (Fig. 3).

2 Place a baby food container or jar centrally in the baby bottle warmer

(Fig. 15).

Note:You can leave off the lid of the food container or jar, so you can stir the

baby food during heating.

3 Fill the baby bottle warmer with the same amount of drinking

water as the amount of baby food you want to warm up (for

example, to warm up 125ml/4oz of baby food, you need to use

125ml/4oz of drinking water). If you want to warm up a large

amount of baby food, the maximum water level is approximately

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Flaschenwärmer Handbücher

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips SCF355/05 Bedienungsanleitung

Philips

Philips HD4331/01 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips SBC SC205 Bedienungsanleitung

Philips

Philips SCF355/03 Bedienungsanleitung

Philips

Philips AVENT Anti-colic Bedienungsanleitung

Philips

Philips AVENT SCF358 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips SBCSC205/34U Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips Avent SCH820/00 Bedienungsanleitung

Philips

Philips AVENT SCF355/02 Bedienungsanleitung

Philips

Philips SBCSC230/05 Bedienungsanleitung

Philips

Philips SCF256 Bedienungsanleitung

Philips

Philips AVENT SCF66 Series Bedienungsanleitung

Philips

Philips AVENT SCF358 Bedienungsanleitung

Philips

Philips AVENT SCF358 Bedienungsanleitung

Beliebte Flaschenwärmer Handbücher anderer Marken

Topcom

Topcom KD-4302 Bedienungsanleitung

SEVERIN

SEVERIN BK-3177 Bedienungsanleitung

SEVERIN

SEVERIN BK 3176 Bedienungsanleitung

Chicco

Chicco 06867 MU Bedienungsanleitung

Reer

Reer Multimax 2 in 1 -travel Bedienungsanleitung

Lionelo

Lionelo Thermup Go Bedienungsanleitung

TEFAL

TEFAL Disney Baby TD1100K0 Bedienungsanleitung

TrueLife

TrueLife INVIO BW Single Bedienungsanleitung

Gourmia

Gourmia JBW-250 Bedienungsanleitung

König Electronic

König Electronic HC-BW10 Bedienungsanleitung

Gourmia

Gourmia JBW-150 Bedienungsanleitung

NUK

NUK MEDICPRO 10.256.467 Bedienungsanleitung

Petra

Petra DI 6.00 Bedienungsanleitung

Philips AVENT

Philips AVENT Electric Bottle and Baby Food Warmer Bedienungsanleitung

babymoov

babymoov Auto Speed Bib Bedienungsanleitung

Alecto

Alecto BW600 Bedienungsanleitung

Lionelo

Lionelo Thermup Bedienungsanleitung

Vinotemp

Vinotemp VT-Chiller Bedienungsanleitung