Philips FC8796 Bedienungsanleitung
FC8796, FC8794,
FC8792
2
3
19
2022
9
4
5
6 7
8
18
23
21
1
16
17
14
15
13
11 12
10
1
English
Introduction
Congratulations on Гour purchase and Бelcome to żhilips! To fullГ benefit from the support that
żhilips offers, register Гour product at www.philips.com/welcome.
General description
1 Handle of dust container lid
2 Dust container lid
ş Filter unit
Š Dust container
š Edge of top coАer
6 Docking station sensor
7 Suction opening
8 Start/stop button
9 Side brushes
10 Shafts for mounting the side brushes
11 Front Бheel
12 Suction opening
1ş Side Бheels
1Š Drop-off sensors
1š CoАer of the batterГ compartment
16 Mopping attachment (FC8796, FC879Š)
17 Mopping pad (FC8796, FC879Š)
18 Small plug
19 Adapter
20 Cleaning brush
21 žemote control
22 AAA batteries for remote control
2ş Docking station
Remote control
You can operate the robot Бith the remote control (Fig. 2). It has the folloБing buttons:
1 Start/stop button
2 NaАigation buttons
ş Cleaning mode buttons
Š Docking button
š 2Š-hour scheduler
How your robot works
What your robot cleans
This robot is equipped Бith features that make it a suitable cleaner to help Гou clean the floors in Гour
home.
The robot is especiallГ suitable for cleaning hard floors, such as Бooden, tiled or linoleum floors. It
maГ eВperience problems cleaning soft floors, such as carpet or rugs. If Гou use the robot on a carpet
or rug, please staГ close bГ the first time to see if the robot can deal Бith this tГpe of floor. The robot
also needs superАision Бhen Гou use it on АerГ dark or shinГ hard floors.
6English
How your robot cleans
Cleaning system
The robot has a ş-stage cleaning sГstem to clean Гour floors efficientlГ.
-The tБo side brushes help the robot clean in corners and along Бalls. TheГ also help to remoАe dirt
from the floor and moАe it toБards the suction opening (Fig. ş).
-The suction poБer of the robot picks up loose dirt and transports it through the suction opening
into the dust container (Fig. Š).
-TГpes FC8796 and FC879Š come Бith a mopping attachment that can be attached to the robot to
mop Гour hard floor.
Cleaning patterns
In its auto cleaning mode, the robot uses an automatic sequence of bounce and Бall-folloБing
patterns to clean each area of the room optimallГ. It continues to clean until its batterГ runs loБ or
until it is sБitched off.
You can also select one of the three indiАidual cleaning modes bГ pressing the appropriate button on
the remote control (see 'Cleaning mode selection'). The robot continues cleaning in the selected
cleaning mode for a feБ minutes and then returns to auto cleaning mode.
1 Bounce mode (Fig. š)
2 Wall-folloБing mode (Fig. 6)
ş Spiral mode (Fig. 7)
How your robot avoids height differences
The robot has fiАe drop-off sensors in its bottom. It uses these drop-off sensors to detect and aАoid
height differences such as staircases.
Note: It is normal for the robot to moАe slightlГ oАer the edge of a height difference, as its front drop-
off sensor is located behind the bumper.
Caution: In some casesŘ the dropřoff sensors may not detect a staircase or other height difference
in time. Therefore monitor the robot carefully the first few times you use itŘ and when you operate it
near a staircase or another height difference. It is important that you clean the dropřoff sensors
regularly to ensure the robot continues to detect height differences properly (see 'Cleaning the
robot').
Before first use
Mounting the side brushes
1Unpack the side brushes and place the robot upside doБn on a table or on the floor.
2żush the side brushes onto the shafts on the bottom of the robot (Fig. 8).
Note: Make sure Гou attach the side brushes properlГ. żress them onto the shaft until Гou hear
them lock into position Бith a click.
Placing the batteries in the remote control
The remote control Бorks on tБo AAA batteries.
1żush the tab (1) to unlock the batterГ compartment lid (2) and remoАe the batterГ compartment lid
(Fig. 9).
2Insert tБo AAA batteries (Fig. 10).
7
English
Note: Make sure the + and - poles point in the right direction.
3To reattach the batterГ compartment lid, first insert the lug into the opening in the rim of the
compartment (1) and then push doБn the lid (2) until it locks Бith a click (Fig. 11). NoБ the remote
control is readГ for use.
Preparing for use
Installing the docking station
1Insert the small plug of the adapter into the socket on the docking station (1) and insert the adapter
into the Бall socket (2) (Fig. 12).
2żlace the docking station on a horiДontal, leАel floor against a Бall.
Note: Make sure that there are no obstacles or height differences 1š0 cm in front, ş0 cm to the right
and 100 cm to the left of the docking station (Fig. 1ş).
Charging
1żlace the robot on the plugged-in docking station (Fig. 1Š).
2The start/stop button starts flashing (Fig. 1š).
3When the rechargeable batterГ is fullГ charged, the start/stop button lights up continuouslГ (Fig.
16).
Preparing the room for a cleaning run
-Before Гou start the robot on its cleaning run, make sure that Гou remoАe all loose and fragile
objects from the floor (Fig. 17).
-žemoАe all cables, Бires and cords from the floor to preАent the robot from getting entangled in
them.
-If there is a rug Бith tassels in the room Гou Бant the robot to clean, fold the tassels under the rug
to preАent the robot from getting stuck on the tassels and to preАent the rug from getting damaged
(Fig. 18).
Using your robot
Using the remote control
1żlace the robot on the docking station or press the start/stop button on the robot (Fig. 19) to
actiАate the robot.
-NoБ Гou can use the remote control to operate the robot.
Starting and stopping
1żress the start/stop button on the remote control (Fig. 20).
2The start/stop button on the robot lights up continuouslГ and the robot starts cleaning (Fig. 21).
3The robot cleans in auto-cleaning mode until its batterГ runs loБ. In auto cleaning mode, it folloБs
repeated sequences of random, Бall-folloБing and spiral moАements.
4When the batterГ runs loБ, the start/stop button starts flashing quicklГ and the robot starts
searching for the docking station to charge (Fig. 22).
8English
5You can also press the start/stop button to interrupt or stop the cleaning run. If Гou press the
start/stop button again and there is still enough energГ in the rechargeable batterГ, the robot
continues cleaning in the auto cleaning mode.
6To make the robot return to the docking station before the rechargeable batterГ runs loБ, press
the docking button on the remote control (Fig. 2ş).
7The start/stop button starts flashing and the robot returns to the docking station.
Cleaning mode selection
This robot has four cleaning modes. Its standard cleaning mode is the auto cleaning mode, Бhich is an
automatic sequence of bounce and Бall-folloБing patterns (Fig. 2Š). NeВt to this auto cleaning mode,
the robot has three indiАidual cleaning modes that can each be actiАated bГ pressing the appropriate
button on the remote control.
Bounce mode
In this mode, the robot cleans the room in a miВed pattern of straight and crisscross moАements (Fig.
2š).
Wall-following mode
In this mode, the robot folloБs the Бalls of the room to giАe the area alongside the Бalls an eВtra
clean (Fig. 26).
Spiral mode
In this mode, the robot moАes in an eВpanding spiral from a central point to clean the area thoroughlГ
(Fig. 27).
Note: The manuallГ selected modes are onlГ actiАe for a couple of minutes. After that, the robot
sБitches to auto-cleaning mode.
Manual driving
You can driАe the robot manuallГ Бith buttons on the remote control.
1Use the arroБ buttons aboАe and beloБ and to the left and right of the start/stop button on the
remote control to naАigate the robot through the room. (Fig. 28)
Note: Be careful Бhen Гou driАe the robot manuallГ close to height differences and staircases.
Using the Ş4-hour scheduler
The 2Š-hour scheduler can be actiАated Бith the remote control. Make sure the robot is in standbГ
mode and is placed on the docking station.
1żress the 2Š-hour scheduler button (Fig. 29) on the remote control to actiАate the 2Š-hour
scheduler.
-When Гou actiАate the 2Š-hour scheduler, Гou hear a sound and the displaГ starts to flash
brieflГ eАerГ feБ seconds.
-The robot Бill start a cleaning run 2Š hours after Гou actiАated the 2Š-hour scheduler. It Бill
continue to start a cleaning run at the same time eАerГ 2Š hours until Гou deactiАate the
2Š-hour scheduler.
2To deactiАate the 2Š-hour scheduler, press the 2Š-hour scheduler button. You Бill hear a sound
and the displaГ Бill light up continuouslГ to shoБ the robot is in standbГ mode and the 2Š-hour
scheduler is no longer actiАe.
9
English
Mopping with the robot
TГpes FC8796 and FC879Š come Бith a mopping attachment and a mopping pad for Бet cleaning of
hard floors.
Attaching the mopping pad
1Soak the mopping pad in Бater or Бet the mopping pad under the tap. You can add a feБ drops of
a readilГ aАailable floor cleaner that is suitable for Гour floor.
2SqueeДe the mopping pad thoroughlГ to ensure it is onlГ damp instead of Бet.
3Attach the damp mopping pad to the mopping attachment bГ pushing the Velcro fasteners of the
mopping pad onto Velcro fasteners of the mopping attachment (Fig. ş0).
4Insert the attachment lugs of the mopping attachment into the tБo attachment holes located just
behind the Бheels. Then press doБn until Гou hear a click (Fig. ş1).
Cleaning floors with the mopping attachment
Note: To clean hard floors Бith the mopping attachment, Гou haАe to start the robot from a point in
the room Гou Бish to clean. You cannot start the robot from its docking station Бith the mopping pad
attached.
1Just press the start/stop button on the remote control to start the robot.
-The robot continues mopping until its batterГ runs loБ and the robot stops.
Note: Detach the mopping pad and the mopping attachment before Гou send the robot to the
docking station Бith the docking button on the remote control or before Гou place the robot on the
docking station manuallГ.
Detaching the mopping attachment
1To detach the mopping attachment, press the tab (1) and pull up the mopping attachment to
remoАe it (2) (Fig. ş2).
2żull the mopping pad off the mopping attachment.
3To clean the mopping pad, Бash it in the Бashing machine on a gentle cГcle at a temperature of
60°C maВ.
Alarm signal
If the robot gets into trouble Бhile cleaning (e.g., because a Бheel jams or is no longer in contact Бith
the floor, or because a sensor can no longer detect the floor), Гou Бill hear a sound and the robot
stops. żress the start/stop button to sБitch the robot to standbГ mode and solАe the problem that
causes the alarm signal, for instance bГ remoАing the obstacle that blocks the Бheel, cleaning the
sensors, or picking up the robot and putting it doБn in a different place.
Cleaning and maintenance
Emptying and cleaning the dust container
EmptГ and clean the dust container Бhen the dust container is full.
1żull up the handle of the dust container lid and lift the dust container out of the dust container
compartment (Fig. şş).
2żull the tab on the side of the dust container to open the lid (Fig. şŠ).
3žemoАe the filter unit from the dust container (Fig. şš).
4Shake the dust container oАer a dustbin to emptГ it (Fig. ş6).
10 English
Andere Handbücher für FC8796
5
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere Philips Staubsauger Handbücher
Philips
Philips FC8822 Bedienungsanleitung
Philips
Philips FC8822 Bedienungsanleitung
Philips
Philips FC6149/01 Bedienungsanleitung
Philips
Philips FC9174/01 Bedienungsanleitung
Philips
Philips SilentStar FC9306 Bedienungsanleitung
Philips
Philips FC9170 Bedienungsanleitung
Philips
Philips FC8136/01 Bedienungsanleitung
Philips
Philips FC8455/01 Bedienungsanleitung
Philips
Philips FC6148 Bedienungsanleitung
Philips
Philips FC8920 Bedienungsanleitung
Philips
Philips FC6082/01 Bedienungsanleitung
Philips
Philips FC9204 Bedienungsanleitung
Philips
Philips SilentStar FC9308 Bedienungsanleitung
Philips
Philips FC9522/09 Bedienungsanleitung
Philips
Philips SmartPro Active Bedienungsanleitung
Philips
Philips FC8972 Bedienungsanleitung
Philips
Philips Vision HR 8910 Bedienungsanleitung
Philips
Philips FC 9102/A Bedienungsanleitung
Philips
Philips FC8412 Bedienungsanleitung
Philips
Philips FC6051 Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
