Pioneer AVIC-F220 Bedienungsanleitung

INSTALLATION MANUAL

MANUEL D’INSTALLATION

HIDE-AWAY NAVIGATION SYSTEM

SISTEMA DE NAVEGACIÓN OCULTO

VERBORGENES NAVIGATIONSSYSTEM

MODULE DE NAVIGATION DEPORTE ETAMOVIBLE

SISTEMA DI NAVIGAZIONE A SCOMPARSA

NAVIGATIESYSTEEM VOOR VERBORGEN INBOUW

AVIC-F220

English NederlandsItalianoFrançaisDeutschEspañol

IMPORTANT INFORMATION

ABOUT YOUR NEW NAVIGATION SYSTEM

AND THIS MANUAL 3

IMPORTANT SAFEGUARDS

PLEASE READ ALL OF THESE

INSTRUCTIONS REGARDING YOUR

NAVIGATION SYSTEM AND RETAIN THEM

FOR FUTURE REFERENCE 4

Connecting the system

Precautions before connecting the

system 5

Before installing this product 5

To prevent damage 5

Parts supplied 6

Connecting the system 7

Connecting the power cord 8

Tying the cables 8

Replacing the fuse 9

Installation

Precautions before installation 10

To guard against electromagnetic

interference 10

Before installing 10

Installing the navigation system 11

–Installation notes 11

–Parts supplied 12

–Before installing the base unit 12

–Installing with self-tapping screws 13

–Installing with the hook and loop

fastener 13

–Attaching the detachable device 14

Installing the GPS aerial 15

–Installation notes 15

–Parts supplied 15

–When installing the aerial inside the

vehicle (on the dashboard or rear

shelf) 16

Installing the RDS-TMC tuner 17

–Parts supplied 17

–Wiring the external aerial 17

–Mounting the RDS-TMC tuner 17

After installation

After installing this navigation system 18

Contents

Engb

ABOUT YOUR NEW

NAVIGATION SYSTEM AND

THIS MANUAL

!The navigation features of this product are

intended solely to aid you in the operation

of your vehicle. It is not a substitute for

your attentiveness, judgement and care

when driving.

!Never use this navigation system to route

to hospitals, police stations, or similar facil-

ities in an emergency. Please call the ap-

propriate emergency number.

!Do not operate this navigation system if

doing so in any way will divert your atten-

tion from the safe operation of your vehicle.

Traffic restrictions and advisories currently

in force should always take precedence

over guidance given by this product. Al-

ways obey current traffic restrictions, even

if this product provides contrary advice.

!This manual explains how to install this na-

vigation system in your vehicle. Operation

of this navigation system is explained in

the separate manuals for the navigation

system.

!Do not install this product where it may (i)

obstruct the driver’s vision, (ii) impair the

performance of any of the vehicle’s operat-

ing systems of safety features, including

airbags, hazard lamp buttons or (iii) impair

the driver’s ability to safely operate the vehi-

cle. In some cases, it may not be possible

to install this product because of the vehi-

cle type or the shape of the vehicle inter-

ior.

Engb 3

English

Section

IMPORTANT INFORMATION

WARNING

Pioneer does not recommend that you install

your navigation system yourself. We recom-

mend that only authorised Pioneer service

personnel, who have special training and ex-

perience in mobile electronics, set up and in-

stall this product. NEVER SERVICE THIS

PRODUCT YOURSELF. Installing or servi-

cing this product and its connecting cables

may expose you to the risk of electric shock

or other hazards, and can cause damage to

the navigation system that is not covered by

warranty.

PLEASE READ ALL OF THESE

INSTRUCTIONS REGARDING

YOUR NAVIGATION SYSTEM

AND RETAIN THEM FOR

FUTURE REFERENCE

1 Read this manual fully and carefully before in-

stalling your navigation system.

2 Keep this manual handy for future reference.

3 Pay close attention to all warnings in this

manual and follow the instructions carefully.

4 This navigation system may in certain circum-

stances display erroneous information regard-

ing the position of your vehicle, the distance

of objects shown on the screen, and compass

directions. In addition, the system has certain

limitations, including the inability to identify

one-way streets, temporary traffic restrictions

and potentially unsafe driving areas. Please

exercise your own judgement in the light of

actual driving conditions.

5 As with any accessory in your vehicle’s inter-

ior, the navigation system should not divert

your attention from the safe operation of your

vehicle. If you experience difficulty in operat-

ing the system or reading the display, please

make adjustments while safely parked.

6 Please remember to wear your seat belt at all

times while operating your vehicle. If you are

ever in an accident, your injuries can be con-

siderably more severe if your seat belt is not

properly fastened.

7 Certain country and government laws may

prohibit or restrict the placement and use of

this system in your vehicle. Please comply

with all applicable laws and regulations re-

garding the use, installation and operation of

your navigation system.

Engb

Section

02 IMPORTANT SAFEGUARDS

Precautions before

connecting the system

CAUTION

!If you decide to perform the installation

yourself, and have special training and ex-

perience in the mobile electronics instal-

lations, please carefully follow all of the

steps in the installation manual.

!Secure all wiring with cable clamps or

electrical tape. Do not allow any bare wir-

ing to remain exposed.

!Do not directly connect the yellow lead of

this product to the vehicle battery. If the

lead is directly connected to the battery,

engine vibration may eventually cause

the insulation to fail at the point where

the wire passes from the passenger com-

partment into the engine compartment. If

the yellow lead’s insulation tears as a re-

sult of contact with metal parts, short-cir-

cuiting can occur, resulting in

considerable danger.

!It is extremely dangerous to allow the

cables to become wound around the steer-

ing column or gearstick. Be sure to install

this product, its cables, and wiring away

in such a way that they will not obstruct

or hinder driving.

!Make sure that the cables and wires are

routed and secured so they will not inter-

fere with or become caught in any of the

vehicle’s moving parts, especially the

steering wheel, gearstick, handbrake, slid-

ing seat tracks, doors, or any of the vehi-

cle’s controls.

!Do not route wires where they will be ex-

posed to high temperatures. If the insula-

tion heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

!Do not cut the GPS aerial cable to shorten

it or use an extension to make it longer.

Altering the aerial cable could result in a

short circuit or malfunction.

!Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse resis-

tor or filter, etc.) may fail to work properly.

!Never feed power to other electronic pro-

ducts by cutting the insulation of the

power supply lead of the navigation sys-

tem and tapping into the lead. The current

capacity of the lead will be exceeded,

causing overheating.

!The black lead is earth. Please earth this

lead separately from the earth of high-cur-

rent products such as power amps. Do not

earth more than one product together

with the earth from another product. For

example, you must separately earth any

amp unit away from the earth of this navi-

gation system. Connecting earths to-

gether can cause a fire and/or damage the

products if their earths became

detached.

Before installing this product

!Use this unit with a 12-volt battery and ne-

gative earthing only. Failure to do so may

result in a fire or malfunction.

!To avoid shorts in the electrical system, be

sure to disconnect the (–) battery cable be-

fore beginning installation.

To prevent damage

!When disconnecting a connector, pull the

connector itself. Do not pull the lead, as

you may pull it out of the connector.

Engb 5

English

Section

Connecting the system

!Attach the connectors of the same colour

to the corresponding coloured port, i.e.,

blue connector to the blue port, black to

black, etc.

Parts supplied

Detachable device Base unit

Power cord RDS-TMC tuner

26-pin cable GPS aerial

External aerial Lock tie

Engb

Section

03 Connecting the system

Connecting the system

We recommend connecting the supplied external aerial. Connect the aerial plug of your vehicle to the AV receiver di-

rectly (Fig. 1).

If you do not use the supplied external aerial in order to split radio signal between this product and the built-in tuner of

the AV receiver (Fig. 2), the radio sensitivity of the AV receiver may decrease.

26-pin cable (supplied)

3.55 m

2 m

GPS aerial

Green

Yellow

Base unit

RDS-TMC tuner

(supplied)

Not used.

Expansion port

30 cm

1 m

30 cm

AV receiver

Aerial jack of AV receiver

External aerial (supplied)

Aerial jack

Vehicle aerial

For more details about the wiring, refer to Wiring the external aerial on page 17.

(Fig. 1)

RDS-TMC tuner AV receiver

Aerial jack of AV receiver

Vehicle aerial

Aerial jack

Aerial plug

(Fig. 2)

Note

The terminal form of the 26-pin cable may differ

depending on the terminal type of the AV receiver.

For details of connection, refer to the installation

manual supplied with the AV receiver.

Engb 7

English

Section

Connecting the system

Connecting the power cord

Yellow

To terminal always supplied

with power regardless of

ignition switch position.

Black (earth)

To vehicle (metal) body.

Power cord

Base unit

Fuse holder

Tying the cables

Tie loose cables in a bundle to prevent the

cables breaking.

%Tie loose cables with the lock tie.

4 cm to 8cm

Leave enough slack part between each terminal and

tying part.

4 cm to 8cm

Engb

Section

03 Connecting the system

Replacing the fuse

WARNING

!When replacing the fuse, be sure to use one

with the same rating.

!Keep the removed fuse out of the reach of

small children to prevent them from acciden-

tally swallowing it.

%Rotate in the clockwise direction to de-

tach the cap of the fuse holder.

Remove the fuse holder cap slowly so the fuse

does not pop out.

Fuse holder

Fuse (3.15 A, 250 V)

Engb 9

English

Section

Connecting the system

Precautions before

installation

CAUTION

!Never install this product in places where,

or in a manner that:

—It could injure the driver or passengers

if the vehicle stops suddenly.

—It may interfere with the driver’s opera-

tion of the vehicle, such as on the floor

in front of the driver’s seat, or close to

the steering wheel or gearstick.

!Make sure there is nothing behind the

dashboard or panelling when drilling

holes in them. Be careful not to damage

fuel lines, brake lines, electronic compo-

nents, communication wires or power

cables.

!When using screws, do not allow them to

come into contact with any electrical lead.

Vibration may damage wires or insulation,

leading to a short circuit or other damage

to the vehicle.

!To ensure proper installation, use the sup-

plied parts in the manner specified. If any

parts other than the supplied ones are

used, they may damage internal parts of

this product or they may work loose and

the product may become detached.

!It is extremely dangerous to allow the

cables to become wound around the steer-

ing column or gearstick. Be sure to install

this product, its cables, and wiring away

in such a way that they will not obstruct

or hinder driving.

!Make sure that leads cannot get caught in

a door or the sliding mechanism of a seat,

resulting in a short circuit.

!Please confirm the proper function of

your vehicle’s other equipment following

installation of the navigation system.

!Do not install this navigation system

where it may (i) obstruct the driver’s vi-

sion, (ii) impair the performance of any of

the vehicle’s operating systems or safety

features, including airbags, hazard lamp

buttons or (iii) impair the driver’s ability

to safely operate the vehicle.

!Never install the navigation system in

front of or next to the place in the dash,

door, or pillar from which one of your vehi-

cle’s airbags would deploy. Please refer to

your vehicle’s owner’s manual for refer-

ence to the deployment area of the frontal

airbags.

To guard against

electromagnetic interference

In order to prevent interference, set the follow-

ing items as far as possible from this naviga-

tion system, other cables or leads:

!FM, MW/LW aerial and its lead

!GPS aerial and its lead

In addition you should lay or route each aerial

lead as far as possible from other aerial leads.

Do not bind them together, lay or route them

together, or cross them. Such electromagnetic

noise will increase the potential for errors in

the location display.

Before installing

!Consult with your nearest dealer if installa-

tion requires the drilling of holes or other

modifications of the vehicle.

!Before making a final installation of this

product, temporarily connect the wiring to

confirm that the connections are correct

and the system works properly.

Engb

Section

04 Installation

Andere Handbücher für AVIC-F220

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Auto-Navigationssystem Handbücher

Pioneer

Pioneer AVIC-HD3 Bedienungsanleitung

Pioneer

Pioneer AVIC-HD1BT Bedienungsanleitung

Pioneer

Pioneer AVIC-F900BT/XS/RE Bedienungsanleitung

Pioneer

Pioneer AVIC-HD3 Bedienungsanleitung

Pioneer

Pioneer AVIC-Z140BH Bedienungsanleitung

Pioneer

Pioneer AVIC-D2 Bedienungsanleitung

Pioneer

Pioneer F900BT - AVIC - Navigation System Bedienungsanleitung

Pioneer

Pioneer AVIC-D1 Bedienungsanleitung

Pioneer

Pioneer AVIC-F940BT Bedienungsanleitung

Pioneer

Pioneer AVIC-880DVD Bedienungsanleitung

Pioneer

Pioneer MZ360500EX Bedienungsanleitung

Pioneer

Pioneer AVIC-F80BT Bedienungsanleitung

Pioneer

Pioneer AVIC-8100NEX Bedienungsanleitung

Pioneer

Pioneer AVIC-F910BT Bedienungsanleitung

Pioneer

Pioneer T1000-23345 Bedienungs- und Wartungshandbuch

Pioneer

Pioneer AVIC N2 - Navigation System With DVD player Bedienungsanleitung

Pioneer

Pioneer CNDV-21 Bedienungsanleitung

Pioneer

Pioneer AVIC-Z110BT Bedienungsanleitung

Pioneer

Pioneer AVIC-F77DAB Bedienungsanleitung

Pioneer

Pioneer AVIC-Z2 - Navigation System With DVD player Bedienungsanleitung

Pioneer

Pioneer AVIC-F710BT Bedienungsanleitung

Pioneer

Pioneer AVIC-505 Bedienungsanleitung

Pioneer

Pioneer AVIC-Z150BH Gebrauchs- und Pflegehandbuch

Pioneer

Pioneer AVIC-F70BT Bedienungsanleitung

Beliebte Auto-Navigationssystem Handbücher anderer Marken

Clarion

Clarion Navigation In-Car Entertainment Bedienungsanleitung

Rosen

Rosen DP-1001 Bedienungsanleitung

Alpine

Alpine INE-W970HD Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot DX-N Bedienungsanleitung

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung

AvMap

AvMap Geosat 2C Bedienungsanleitung

Eonon

Eonon GE01B Bedienungsanleitung

Nextar

Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung

Furrion

Furrion NV2200 Bedienungsanleitung

Mio

Mio MOOV 200-Series Bedienungsanleitung

Prestigio

Prestigio GeoVision 5150 Bedienungsanleitung

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch

Garmin

Garmin StreetPilot c510 Bedienungsanleitung

Garmin

Garmin nüvi 2200 Bedienungsanleitung

Garmin

Garmin 2610/2650 Bedienungsanleitung

Mazda

Mazda 107006AN Bedienungsanleitung

Toyota

Toyota TNS600 Bedienungsanleitung

Toyota

Toyota TNS 200 Bedienungsanleitung